DOI QR코드

DOI QR Code

Application of Conifer Leave Powder to the Papermaking Process as an Organic Filler

제지공정의 유기 충전제로서 침엽수 잎 분말 적용

  • Sung, Yong Joo (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Kim, Dong-Sung (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Lee, Ji-Young (Dept. of Environmental Materials Science/IALS, Gyeongsang National Univ.) ;
  • Seo, Yong-Bum (Dept. of Biobased Materials, College of Agriculture and Life Science, Chungnam Natl. Univ.) ;
  • Im, Chang-Kuk (Dongil Paper Company Inc.) ;
  • Gwon, Wan-Oh (Dongil Paper Company Inc.) ;
  • Kim, Jin-Doo (Dongil Paper Company Inc.)
  • 성용주 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 김동성 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 이지영 (경상대학교 환경재료과학과/농업생명과학연구원) ;
  • 서영범 (충남대학교 농업생명과학대학 환경소재공학과) ;
  • 임창국 (동일제지주식회사) ;
  • 권완오 (동일제지주식회사) ;
  • 김진두 (동일제지주식회사)
  • Received : 2014.08.14
  • Accepted : 2014.08.22
  • Published : 2014.08.30

Abstract

The application of conifer leave to the papermaking process as a functional organic filler was investigated in this study. The powder of the conifer leave after hot water extraction for the functional extract, such as phytoncide, was applied to OCC stock. The comparison between the commercial wood flour and the conifer leave powder as organic filler for OCC paper were conducted with various wet pressing conditions. The amount of the water removal by the wet pressing process and the bulk of handsheet were increased by the addition of the wood flour and the conifer leave powder, although the tensile strength was decreased. At the higher pressure condition of the wet pressing, the wet pressing efficiency was greatly increased by the wood flour and the conifer leave powder. There was a little difference in the performance of the wood flour and the conifer leave powder as an organic filler. Those results showed the conifer leave powder could be an alternative resource to the wood powder for papermaking organic filler.

Keywords

References

  1. Kang, D. J., and Kim, K. W., Effect of temperature and wind velocity on phytoncide concentration in korean pine(pinus koraiensis) forest, Journal of Korean Society for Plants, People and Environment 15(1): 15-20 (2012).
  2. Auh, Q., S., Hong, J. P., and Chun, Y. H., Antibacterial effect on oral normal flora of phytoncide from chamaecyparis obtusa, Journal of Oral Medicine and Pain 34(4):353-362 (2009).
  3. Kim, Y. J., Cho, B. J., Ko, M. S., Jung, J. M., Kim, H. R., Song, H. S., Lee, J. Y., Sim, S. S., and Kim, C. J., Anti-oxidant and anti-aging activities of essential oils of pinus densiflora needles and twigs, The Pharmaceutical Society of Korea 54(4):215-225 (2010).
  4. Nam, E. S., and Uhm, D. C., Effects of phytoncides inhalation on serum cortisol level and life stress of college students, Korean Journal of Adult Nursing 20(5):697-706 (2008).
  5. Won, J. M., Improvement of water removal efficiency in papermachine wet press, The 31th KTAPPI International Symposium Proceedings, Korea TAPPI, pp. 43-69 (2005).
  6. Kim, D. S., Sung, Y. J., Kim, S. B., Lee, J. W., and Park, G. S., Environmental management strategies of Korean paper industry for response to climate change, Journal of Korea TAPPI 45(4):42-51 (2013). https://doi.org/10.7584/ktappi.2013.45.4.042
  7. Lee, S. Y., and Park, S. Y., Korea industry rating methodology, Korea Investors Service Inc. (2013).
  8. Cho, J. H., Environmental features and actions of pulp & paper industry, Journal of Korea TAPPI 41(3): 13-21 (2009).
  9. Kang, D. O., and Suh, H. H., Isolation of microorganisms and development of microbial augmentation for treatment of paper mill wastewater, Journal of Life Science 21(4):554-560 (2011). https://doi.org/10.5352/JLS.2011.21.4.554
  10. Kim, D. S., Sung, Y. J., Lee, J. W., Kim S. B., and Park, G. S., Investigation into methods for reducing greenhouse gas emission in paper industry with development of greenhouse gas inventory, Journal of Korea TAPPI 44(2):49-57 (2012). https://doi.org/10.7584/ktappi.2012.44.2.049
  11. Hwang, I. Y., Lee, Y. H., Jung, J. G., Sung, Y. J., and Seo, Y. B., Application of spacers for increasing OCC solid content in wet pressing process(I), Journal of Korea TAPPI 44(4):1-7 (2012). https://doi.org/10.7584/ktappi.2012.44.4.001
  12. Shin, T. G., Kim, C. H., Chung, H. K., Seo, J. M., and Lee, Y. R., Fundamental study on developing lignocellulosic fillers for papermaking(I), Journal of Korea TAPPI 40(2):8-15 (2008).
  13. Kim, C. H., Lee, J. Y., Lee, Y. R., Chung, H. K., Back, K. K., Lee, H. J., Gwak, H. J., Gang, H. R., and Kim, S. H., Fundamental study on developing lignocellulosic fillers for papermaking(II) - Effect of lignocellulosic fillers on paper properties -, Journal of Korea TAPPI 41(2):1-6 (2009).
  14. Lee, J. Y., Lim, G. B., Kim, Y. H., Lee, S. R., Kim, M. Y., Kim, C. H., Kim, S. Y., and Kim, J. S., Evaluation of the physical properties of organic fillers made from agricultural byproducts, Journal of Korea TAPPI 45(4):34-41 (2013). https://doi.org/10.7584/ktappi.2013.45.4.034
  15. Lee, J. Y., Lee, E. K., Sung, Y. J., Kim, C. H., Choi, J. S., Kim, B. H., Lim, G. B., and Kim, D. M., Application of new powdered additives to paperboard using peanut husk and garlic stem, Journal of Korea TAPPI 43(4):40-48 (2011).
  16. Lee, J. Y., Kim, C. H., Choi, J. S., Kim, B. H., Lim, G. B., and Kim, D. M., Development of new powdered additive and its application for improving the paperboard bulk and reducing drying energy(I) - Analysis of chemical and physical properties of brewers grain -, Journal of Korea TAPPI 44(2):58-66 (2012). https://doi.org/10.7584/ktappi.2012.44.2.058
  17. Lee, J. Y., Kim, C. H., Kim, S. Y., Kim, B. H., Lim, G. B., and Kim, J. S., Development of new powdered additive and its application for improving the paperboard bulk and reducing drying energy(II) - surface modification of brewers grain(BG) and oil palm frond(OPF) powders with cationic and oxidized starches -, Journal of Korea TAPPI 45(2):33-40 (2013). https://doi.org/10.7584/ktappi.2013.45.2.033
  18. Lee, J. Y., Lee, E. K., Lee, D. Y., Yun, K. T., Sung, Y. J., Choi, J. S., Kim, D. M., Kim, B. H., and Lim, G. B., Study on the application of inorganic byproduct from fertilizer manufacture process as an alternative filler, Journal of Korea TAPPI 44(1):52-57 (2012). https://doi.org/10.7584/ktappi.2012.44.1.052

Cited by

  1. Sustainably Processed Waste Wool Fiber-Reinforced Biocomposites for Agriculture and Packaging Applications vol.9, pp.9, 2021, https://doi.org/10.3390/fib9090055
  2. Application of spruce wood flour as a cellulosic-based wood additive for recycled paper applications- A pilot paper machine study vol.20, pp.10, 2014, https://doi.org/10.32964/tj20.10.641