• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.98-103
• /
• 2002

The prototype test train(HSR 350X) was developed and is now being tested in R＆D project for developing Korean High Speed Rolling Stock. International cooperative works with German, Japanese, Danish English and Swiss company were done for reviewing the results made by domestic companies and enhancing their design capability. The main results of cooperation are shown in this paper. In addition, some problems and comments issued during cooperation are also represented.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2002년도 추계학술대회 논문집(I)
• /
• pp.137-142
• /
• 2002

This paper shows the results of exterior and interior design of a prototype test train(HSR 350X) which was developed in R＆D project titled "Development of High Speed Railway Technology". The prototype test train, which has two power cars, two motorized trailers and three trailers, is now being tested on high speed line. The improved conceptual design work of a new commercial train and next generation′s train is also peformed for future needs.

• 한국자동차공학회논문집
• /
• 제2권2호
• /
• pp.83-94
• /
• 1994

Performance test result on prototype car equipped with low-band type active suspension system is reported. Control theory is explained first. Simulation for feasibility and parameter tuning, control module test using hydraulic exciter and test run, and performance evaluation of the test car on test track are reported successively. Emphasis was put on modification of control theory which caused many unexpected problems in actual implementation.

• 복식
• /
• 제50권4호
• /
• pp.117-130
• /
• 2000

This study is to develop the well-fit clean room smocks by wearing test of 2 available clean room smocks and a revised smock. 20 female subjects individually participated in the wearing test. The test procedure consisted of a rating on fit and adaptability and comparative test according to clean room smock types. The summaries of results are as follows : 1. The results of fit and adaptability rating on different clean room smocks showed that the revised type proved the most effective from a viewpoint of fitness and adaptability, 2. As far as the result of comparative test are concerned, most of the subject assessed the revised type is the most comfortable. As for freedom of movement, it is disclosed that the subjects prefer the revised type too.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.1-7
• /
• 2006

This paper is a record of the study on a high efficiency and high power chopper based on the new soft switching method QRAS (Quasi~resonant Regenerating Active Snubber) designed for a Fuel Cell Electric Vehicle (FCEV). This power chopper is basically proposed for 25kHz soft switching. To confirm the practicality and effectiveness of the converter, the fabrication of a prototype-model using IGBTs was completed. Additionally, a 8kW rating test, a light load test, a current discontinuous mode test and a stable operation resonance test was completed. The circuit geometry, the basic operation, and the 8kW one-tenth-prototype test results are reported with a $97.5\%$ efficiency measurement.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.429-432
• /
• 2000

Test methods by hydraulic oil or vehicular live load have been used for structural evaluation of prototype bridge. However it has been reported that the use of hydraulic jack has some disadvantages for the view of safety and economy, and the complete structural evaluation through each loading state can not be accomplished blocks is presented to overcome those demerits. To verify the application and safely of the use of concrete weight blocks during each loading state, it is applied to prototype deteriorated bridge. As a result, it could be evaluated the structural behavior completely using the concrete weight blocks

• 전기학회논문지P
• /
• 제67권3호
• /
• pp.168-174
• /
• 2018

The performance test for 376MW ESS for frequency regulation currently operating in 13 substations is conducted based on the test procedure in the first and second steps. In the first step, components of ESS is moved to the certification authority where the test equipment is located in order to be proceeded with the test. In the second step, the performance test is conducted manually for the ESS equipments installed on site using the movable measurement equipment, and thus it can only be performed on some limited test items and requires a lot of time and manpower. Therefore, mobile test equipment for ESS(MOTES) is being developed that can perform automatically more test items for ESS in the field using the MOTES, and reduce manpower and time. To do this, an algorithm and a prototype of the operating system(MOS) are also being developed that can control MOTES automatically. In this paper, a development of the MOS prototype is introduced and then a simulation is performed to verify the prototype and its algorithm before the field demonstration.

• Nuclear Engineering and Technology
• /
• 제48권5호
• /
• pp.1083-1095
• /
• 2016

The design of Prototype Gen-IV Sodium-Cooled Fast Reactor (PGSFR) has been developed and the validation and verification (V&V) activities to demonstrate the system performance and safety are in progress. In this paper, the current status of test activities is described briefly and significant results are discussed. The large-scale sodium thermal-hydraulic test program, Sodium Test Loop for Safety Simulation and Assessment-1 (STELLA-1), produced satisfactory results, which were used for the computer codes V&V, and the performance test results of the model pump in sodiumshowed good agreement with those in water. The second phase of the STELLA program with the integral effect tests facility, STELLA-2, is in the detailed design stage of the design process. The sodium thermal-hydraulic experiment loop for finned-tube sodium-to-air heat exchanger performance test, the intermediate heat exchanger test facility, and the test facility for the reactor flow distribution are underway. Flow characteristics test in subchannels of a wire-wrapped rod bundle has been carried out for safety analysis in the core and the dynamic characteristic test of upper internal structure has been performed for the seismic analysis model for the PGSFR. The performance tests for control rod assemblies (CRAs) have been conducted for control rod drive mechanism driving parts and drop tests of the CRA under scram condition were performed. Finally, three types of inspection sensors under development for the safe operation of the PGSFR were explained with significant results.

• 대한기계학회논문집A
• /
• 제35권10호
• /
• pp.1249-1255
• /
• 2011

공정열교환기는 초고온가스로로부터 생성된 $950^{\circ}C$ 정도의 초고온 열을 대량의 수소를 생산하기 위한 화학반응공정으로 전달하는데 필요한 핵심기기이다. Hastelloy-X 로 제작된 소형 공정열교환기 시제품이 한국원자력연구원에 있는 소형가스루프에서 성능시험이 계획되어 있다. 본 연구에서는 소형가스루프 시험조건하에서 소형 공정열교환기 시제품의 고온 구조건전성을 사전에 평가하기 위한 작업의 일환으로 소형 공정열교환기 시제품에 대한 고온 구조해석 모델링, 거시적 열 해석 및 탄 소성구조 해석을 수행하고 그 결과들을 정리한 것이다. 해석 결과는 공정열교환기 수정 시제품 성능시험장치 설계에 반영할 것이다.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1137-1143
• /
• 2011

초고온가스로의 중간열교환기는 원자로에서 생산된 $950^{circ}C$ 정도의 초고온 열을 수소생산 공장으로 전달하는 핵심 기기이다. 한국원자력연구원에서는 중간열교환기의 후보 형태로 고려되고 있는 인쇄기판형 열교환기의 소형 시제품을 제작하였다. 본 연구는 소형가스루프 시험조건하에서 인쇄기판형 열교환기 소형 시제품의 고온 구조건전성을 시험수행 전에 미리 평가하기 위한 작업의 일환으로 인쇄기판형 열교환기 소형 시제품에 대한 고온 구조해석 모델링, 거시적 열 해석 및 구조 해석을 수행하고 그 결과들을 정리한 것이다. 해석 결과는 곧 수행될 인쇄기판형 열교환기 소형 시제품 성능시험결과와 비교하고 또한 향후 제작될 중형 시제품 설계/제작에 반영할 것이다.