• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.7
• /
• pp.1030-1040
• /
• 2018

In Distributed Mobility Management (DMM) protocol, the mobility functions are distributed to network edge closer to mobile users. DMM protocol has some advantages of low-cost traffic delivery, optimized routing path, high scalability. However, it needs many mobile anchors to exchange signaling messages and it results in a high signaling cost. Thus, previous works suggested the hybrid DMM protocol to reduce the high signaling cost for long-live sessions and this paper extends a hybrid scheme to the NEMO environment. The mobile routers are installed at vehicles and can move together with several mobile devices. So we can define the high-mobility property for mobile routers and suggest the hybrid scheme using this property. According to the high-mobility property of mobile routers, we can distribute the mobile anchors or allocate a centralized mobile anchor. In this paper, we mathematically analyze the performance of the proposed NEMO-enabled hybrid DMM protocol and show superior performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.3B
• /
• pp.224-236
• /
• 2003

MANET(Mobile Ad hoc networks) is a mobile, multi-hop, and wireless network which is bandwidth constrained, energy constrained, resource constrained, autonomous, and self operating systems with dynamic topology. These constraints make the routing between communicating nodes in ad hoc networks difficult. In this paper we survey several routing protocol for mobile ad hoc networks. Especially, we focus on Zone Routing Protocol, hybrid routing framework suitable for a wide of mobile ad hoc networks and analyze performance of ZRP. In the case of ZRP protocol, it is essential that the use of optimal zone radius for efficient use. Otherwise it was proved through an simulation that performance of whole network is rapidly decrease with greatly increasing overhead of ZRP traffic that need for transmission of packet by IARP or IERP traffic. Also we suggest the process of finding QoS path that use in-band signal for QoS routing in ad hoc network. This method guarantees route that make real time multimedia service for QoS enabled path.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.707-715
• /
• 2003

In this paper, we propose a new MAC(Medium Access Control) protocol using Movable-boundary, which tries to guarantee Qos for multimedia traffic in the slotted CDMA system. In this scheme, the traffic scheduler assigns channel resource according to the packet priority per service class and adapts the Movable-boundary concept in which the minimum resource is assigned to each traffic class; the remaining resource if it is available can be assigned dynamically according to the temporal demand of other traffic classes. For performance analysis, we performed computer simulations to obtain throughput and packet loss rate and compared the results with Fixed-boundary system. We observed that the error rate of voice traffic could be maintained below a prescribed value while bursty traffic such as video source shares the same channel. In comparison with Fixed-boundary scheme, our protocol exhibits better throughput and packet loss rate performance.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.28 no.1
• /
• pp.5-14
• /
• 2018

With the advance of the 4th industrial revolution, Internet of Things (IoT) technology is actively being studied. In the era of the IoT, a decentralized operation is required to reduce load on servers and enable autonomous IoT data communication rather than focusing on centralized operation of being server client structures. This paper analyzes the security of a blockchain, a new form of distributed database platform that supports integrity and permanence of data. To achieve this, we divide the blockchain's major operations into a consensus process, network communication process, and key management process, and then describe possible attacks and countermeasures in each process. We also describe the attack occurred in typical cryptocurrency platforms such as Bitcoin and Ethereum.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.11
• /
• pp.495-502
• /
• 2013

In this paper, we present an anonymous authentication and location assurance protocol for secure location-aware services over vehicular ad hoc networks (VANETs). In other to achieve our goal, we propose the notion of a location-aware signing key so as to strongly bind geographic location information to cryptographic function while providing conditional privacy preservation which is a desirable property for secure vehicular communications. Furthermore, the proposed protocol provides an efficient procedure based on hash chain technique for revocation checking to effectively alleviate communication and computational costs on vehicles in VANETs. Finally, we demonstrate comprehensive analysis to confirm the fulfillment of the security objectives, and the efficiency and effectiveness of the proposed protocol.

• Journal of KIISE:Information Networking
• /
• v.36 no.4
• /
• pp.309-321
• /
• 2009

Nowadays, requests of connecting to the Internet while moving are increasing more and more, and various technologies have been developed for satisfying those requests. The IETF nemo WG standardized "Network Mobility Basic Support Protocol" for supporting mobile network through extending existing MIPv6 protocol for supporting host mobility. But, mobile networks can be nested while they are changing their location. And if they are multi -level nested, that causes some problems because of protocol characteristic. In this paper, we try to solve the problem that is complicated routing path caused by multi-level nesting of mobile networks with our limited prefix delegation method. We give a little modification to the standard protocol and add some functions to mobile router. With results from analysis, we could say that our method has better performance than other proposed methods.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.481-488
• /
• 2021

The satellite telecommand processing system is the only way to provide telecommands for status monitoring, control, and mission execution. Domestic satellites can be divided into science, technology, and multi-purpose satellites, and geostationary satellites. These Satellites uses CCSDS standard protocol to communicate with ground stations. However, existing domestic satellites use only software to decode telecommands which increases cost of software development and verification of the developed software. Performance of software only approach is relatively low compared to hardware. In this paper, we present ASIC processing system specifically designed to decode telecommands. The system consists of a telecommand RAM, a protocol RAM/ROM, an ASIC, an interface unit of FPGA, and a relay block. The system handles general commands and pulse commands that are used in satellites. We established a ground station equipment and test environment to verify the system functionality, The result shows that our system reduces the development cost by 1/5 and improves the performance by 10⁵ times compared to the previous systems that decode telecommands only by software.

• Convergence Security Journal
• /
• v.17 no.5
• /
• pp.3-10
• /
• 2017

Standard Protocol Optimized for Resource-Constrained IoT Environment Constrained Application Protocol (CoAP) supports web-based communication between a sensor node in the IoT environment and a client on the Internet. The CoAP is a Request / Response model that responds to the client's CoAP Request message by responding with a CoAP Response message from the server. CoAP recommends the use of CoAP-DTLS for message protection. However, validation of the use of DTLS in the IoT environment is underway. We analyze CoAP and DTLS security mode, evaluate performance of secure channel creation time, security channel creation step time, and RAM / ROM consumption through Cooja simulator and evaluate the possibility of real environment application.

• Journal of Convergence for Information Technology
• /
• v.11 no.7
• /
• pp.21-30
• /
• 2021

With the development of IoT technology, various cloud computing-based services such as smart cars, smart healthcare, smart homes, and smart farms are expanding. With the advent of a new environment, various problems continue to occur, such as the possibility of exposure of important information such as personal information or company secrets, financial damage cases due to hacking, and human casualties due to malicious attack techniques. In this paper, we propose a message communication protocol for smart home-based secure communication and user data protection. As a detailed process, secure device registration, message authentication protocol, and renewal protocol were newly designed in the smart home environment. By referring to the security requirements related to the smart home service, the stability of the representative attack technique was verified, and as a result of performing a comparative analysis of the performance, the efficiency of about 50% in the communication aspect and 25% in the signature verification aspect was confirmed.

• International Journal of Computer Science & Network Security
• /
• v.21 no.11
• /
• pp.301-311
• /
• 2021

The technological advancements of the last two decades directed the era of the Internet of Things (IoT). IoT enables billions of devices to connect through the internet and share their information and resources on a global level. These devices can be anything, from smartphones to embedded sensors. The main purpose of IoT is to make devices capable of achieving the desired goal with minimal to no human intervention. Although it hascome as a social and economic blessing, it still brought forward many security risks. This paper focuses on providing a survey of the most commonly used application layer protocols in the IoT domain, namely, Constrained Application Protocol (CoAP), Message Queuing Telemetry Transport (MQTT), Advanced Message Queuing Protocol (AMQP), and Extensible Messaging and Presence Protocol (XMPP). MQTT, AMQP, and XMPP use TCP for device-to-device communication, while CoAP utilizes UDP to achieve this purpose. MQTT and AMQP are based on a publish/subscribe model, CoAP uses the request/reply model for its structuring. In addition to this, the quality of service provision of MQTT, AMQP, and CoAP is not very high, especially when the deliverance of messages is concerned. The selection of protocols for each application is very a tedious task.This survey discusses the architectures, advantages, disadvantages, and applications of each of these protocols. The main contribution of this work is to describe each of the aforementioned application protocols in detail as well as providing their thorough comparative analysis. This survey will be helpful to the developers in selecting the protocol ideal for their system and/or application.