• 한국광학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2001

엄밀한 결합파 해석(rigorous coupled-wave analysis)을 이용하여 2차원 및 3차원의 주기적인 구조 제작을 위한 2차원 이진위상 회절격자를 설계 및 분석하였다. 이 회절격자는 근접장 홀로그래피를 위한 위상 마스크로서 수직 입사하는 빛에 대하여 여거 개의 회절파들을 발생하고 이들은 공간상에 주기적인 간섭무늬를 형성한다. 입사파의 편광상태, 파장, 표면 양각형태, 요철 깊이와 duty cycle을 바꿈으로써 회절된 빛들을 조절할 수 있는데 2차원 구조의 경우 0차 회절효율이 최소가 되고 1차회절효율이 최대가 될 때 최적의 결과를 보인다. 한편 0차 회절효율이 상당한 크기를 가지거나 심지어 다른 차수의 회절효율보다 높을 때 마이크로 미터 이하의 미세구조를 갖는 tetragonal-body-centered 구조와 hexagonal 구조의 포토닉 결정을 제작 할 수 있는 다양한 형태의 3차원 공간 간섭무늬가 형성된다.

• 대한수학회보
• /
• 제30권2호
• /
• pp.285-293
• /
• 1993

In [4], Baumslag and Tretkoff proved a residual finiteness criterion for HNN extensions (Theorem 1.2, below). This result has been used extensively in the study of the residual finiteness of HNN extensions. Note that every one-relator group can be embedded in a one-relator group whose relator has zero exponent sum on a generator, and the latter group can be considered as an HNN extension. Hence the properties of an HNN extension play an important role in the study of one-relator groups [3], [2]. In this paper we prove a criterion for HNN extensions to be .pi.$_{c}$(Theorem 2.2). Moreover, we can prove that certain one-relator groups, known to be residually finite, are actually .pi.$_{c}$. It was known by Mostowski [10] that the word problem is solvable for finitely presented, residually finite groups. In the same way, the power problem is solvable for finitely presented .pi.$_{c}$ groups. Another application of subgroup separability with respect to special subgroups was mentioned by Thurston [12, Problem 15].m 15].

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1991년도 봄 학술발표회 논문집
• /
• pp.54-59
• /
• 1991

This experimental investigation was aimed at gathering information on the flexural properties, including ductility, of high-strength lightweight concrete members(concrete with a dry unit weight of approximately 1.85t/$\textrm{m}^3$ and with compressive strength approaching 630kg/$\textrm{cm}^2$ at 56days) under reversed cyclic loading. Two sets of six specimens each were manufactured using lightweght aggregate concrete having compressive strength of 350kg/$\textrm{cm}^2$ at 28days and 630kg/$\textrm{cm}^2$ at 56days. The test variables were the concrete strength, the amount of longitudinal reinforcement, and the spacing of ties. The test results, including hysteretic load-deflection curves, for the specimens representing columns under zero axial load are reported in this paper.

• Journal of Photoscience
• /
• 제7권3호
• /
• pp.97-101
• /
• 2000

The 77 K emission and excitation spectra, and 298 K infrared and absorption spectra of mer-[CrCl(en)(dpt)]ZnCl$_4$(en=1,2-diaminoethane; dpt=1,5,9-triazanonane) have been measured. Ligand field electronic transitions due to spin-allowed and spin-forbidden are assigned. The zero-phonon line in the excitation spectrum splits into two components by 151$cm^{-1}$ /, and large$^2$E$^{g}$ splitting can be reproduced by the modern ligand field theory. It is confirmed that nitrogen atoms of the en and dpt ligands have a strong $\delta$-donor character, but chloride ligand has weak $\delta$-and $\pi$-donor properties toward chromium(III) ion.

• 한국세라믹학회지
• /
• 제33권3호
• /
• pp.313-320
• /
• 1996

We have fabricated an in-plane aligned a-axis oriented YBa2Cu3O7-x (a-YBCO) thin film on a LaSrGaO4(100) substrate with a PrBa2Cu3O7-x(PBCO) template layer by two step plused laser deposition using 308 nm XeCl excimer laser. A YBCO layer and PBCO layer grown at low temperatures were used as template layers. We have investigated the effect of the deposition temperature of template layers on the superconducting and struc-tural properties of in-plane aligned a-YBCO thin films. An optimal deposition temperature of the PBCO template layers was 630. In-plane aligned a-YBCO thin films showed an anisotropy ratio in resistivity of 11.5 and a zero resistance temperature of 88 K.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.473-480
• /
• 1990

Low-voltage ZnO-based varistors were made by seed grain method at various sintering conditions. Their microstructure and electrical properties were investigated and comlpared with those of the ZnO varistors made by a conventional method at the same sintering condition. During the sintering process, the added seed ZnO grain rapidly grew to be a gaint grain(above 500$\mu\textrm{m}$) provinding easy current path. Therefore the breakdown voltage was lowered as much as the order of 1/10-1/5 in comparison to that of the varistor made by a conventional method. But the grain size of the giant ZnO was little influenced by sintering condition, so the breakdown voltate was also little influenced. The weight loss was decreased by the addition of the seed grain, because the giant grain decreased the evaporation area. Therefore the nonobmic property of the specimen made by seed grain method was little influencedby sintering condition. In this research the low-voltage varistor made by seed grain method showed the least leakage current when sintered at 1150$^{\circ}C$ for zero hour.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.274-279
• /
• 2000

This paper is concerned with the orthotropic problem of diaphragm-type air springs which consist of rubber linings, nylon reinforced rubber composite and bead ring. The analysis is carried out with a finite element method developed to consider the orthotropic properties, geometric nonlinearity using four-node degenerated shell element with reduced integration. Physical stabilization scheme is used to control the zero-energy modes of the element. An inflation analysis and a lateral deformation analysis of an air spring are carried out. Numerical analysis results demonstrate the variation of the outer diameter, the fold height, the vertical force and the lateral force.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.13-14
• /
• 2010

The active clamp forward converter provides zero voltage switching and low voltage stress in wide input voltage range. It has a high efficiency at a high switching frequency and the clamped energy is recovered to the input stage. It is available for the power adaptor circuit of notebook computer. The adaptor with 19.5V/200W output power is designed for notebook computer. Specially, it is considered the transformer properties of the converter in design process. The organized process is checked by the validity from the test of the active clamp forward converter.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.86-88
• /
• 1999

We investigated the current limiting characteristics of resistive and inductive SFCLs with $100{\Omega}$ of quench impedance for a line-to-line fault in the 154 kV transmission system. The fault simulation at the phase angles $0^{\circ}$, $45^{\circ}$, and $90^{\circ}$ showed that the resistive SFCL limited the fault current less than 15 kA without any DC component after one half cycle from the instant of the fault. On the other hand, the inductive SFCL suppressed the current below 13 kA, but with $2{\sim}3\;kA$ of DC component which decreased to zero in 6 cycles. We concluded that the inductive SFCL had higher performance in current limiting but the resistive SFCL was better from the view point of DC components.

• Journal of the Korean Statistical Society
• /
• 제36권1호
• /
• pp.1-29
• /
• 2007

Suppose one is trying to estimate a high dimensional vector of parameters from a series of one observation per parameter. Often, it is possible to take advantage of sparsity in the parameters by thresholding the data in an appropriate way. A marginal maximum likelihood approach, within a suitable Bayesian structure, has excellent properties. For very sparse signals, the procedure chooses a large threshold and takes advantage of the sparsity, while for signals where there are many non-zero values, the method does not perform excessive smoothing. The scope of the method is reviewed and demonstrated, and various theoretical, practical and computational issues are discussed, in particularly exploring the wide potential and applicability of the general approach, and the way it can be used within more complex thresholding problems such as curve estimation using wavelets.