• 한국재료학회지
• /
• 제15권5호
• /
• pp.313-317
• /
• 2005

The relation between bulk microdefect (BMD) and mechanical strength of $P/P^-$ epitaxial silicon wafers (Epitaxial wafer) as a function of nitrogen concentrations was studied. After 2 step anneal$(800^{\circ}C/4hrs+1000^{\circ}C/16hrs)$, BMD was not observed in nitrogen undoped epitaxial silicon wafer while BMD existed and increased up to $3.83\times10^5\;ea/cm^2$ by addition of $1.04\times10^{14}\;atoms/cm^3$ nitrogen doping. The slip occurred for nitrogen undoped and low level nitrogen doped epitaxial wafers. However, there was no slip occurrence above $7.37\times10^{13}\;atoms/cm^3$ nitrogen doped epitaxial wafer. Mechanical strength was improved from 40 to 57 MPa as nitrogen concentrations were increased. Therefore, the nitrogen doping in silicon wafer plays an important role to improve BMD density, slip occurrence and mechanical strength of the epitaxial silicon wafers.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
• /
• pp.484-485
• /
• 2008

초음파는 의학적 진단 및 치료의 목적으로 널리 사용되어 왔다. 일반적으로, 초음파 조사의 생물학적 무해성은 많은 연구를 통하여 보고되었으나, 최근 초음파 집속을 통한 강력 초음파의 사용에 대한 열적 안전성 평가가 중요한 요소로 대두되고 있다. 이에 본 연구에서는 강력 집속 초음파의 전달 에너지와 열적 분포를 측정하여 안전성 평가에 활용 가능한 초음파 열분포 팬텀을 제안하였다. 온도 분포 측정용 팬텀은 초음파 조직유사 팬텀 재료인 한천을 이용하였으며, 음향학적 특성의 유사성을 평가하였다. 온도 효과를 측정하기 위하여 $3{\times}3$의 형태로 온도 센서를 팬텀 내부에 배열하여 초음파 조사에 따른 온도 분포를 측정하였고 온도 측정을 위한 시스템을 개발하여, 초음파 가열 실험을 수행하였다. 본 연구에서 제안된 초음파 온도 분포 측정용 팬텀의 유용성을 확인하였으며, 온도 분포용 팬텀을 통한 강력 집속 초음파 장비의 열적 성능 평가에 적용 될 수 있을 것으로 사료되었다.

• Journal of Pharmaceutical Investigation
• /
• 제40권3호
• /
• pp.181-185
• /
• 2010

The objective of this study was to improve the extent of drug release as well as the dissolution rate of TD49, a novel algicidal agent, via the preparation of solid dispersion (SD). Among the various carriers tested, $Solutol^{(R)}$ HS15 was most effective to enhance the solubility of TD49. Subsequently, SDs of TD49 were prepared by using $Solutol^{(R)}$ HS15 and their solubility, dissolution characteristics and drug crystallinity were examined at various drug-carrier ratios. Solubili ty of TD49 was increased significantly in accordance with increasing the ratio of $Solutol^{(R)}$ HS15 in SDs. Compared to untreated powders and physical mixtures (PMs), SDs facilitated the faster and greater extent of drug release in water. Particularly, SD having the drug-carrier ratio of 1:20 exhibited approximately 90% of drug release within 1 hr. Differential scanning calorimetry (DSC) thermograms and X-ray diffraction (XRD) patterns suggested that SDs might enhance the dissolution of TD49 by changing the drug crystallinity to an amorphous form in addition to the increased solubilization of drug in the presence of $Solutol^{(R)}$ HS15. In conclusion, SD using $Solutol^{(R)}$ HS15 appeared to be effective to improve the extent of drug release and the dissolution rate of poorly water soluble TD49.

• Journal of Welding and Joining
• /
• 제34권5호
• /
• pp.77-82
• /
• 2016

In this study, Microstructure and hardness of 1st layer with crystallographic orientation were investigated about solidification structure in multipass weld using high Mn-Ni flux cored wire. Microstructure of solidification consisted of austenite matrix and a little ${\varepsilon}-phase$ in grain boundaries. Orientation of grains was usually (001), (101), (111). According to crystallographic orientation, morphology of primary dendrite was different. The depletion of Fe and the segregation of Mn, C, Ni, Si, Cu, Cr, O were found along the grain boundaries. The area of segregation was wide with an order of (001), (101), (111) grains. And hardness of grains with crystallographic orientation increased with an order of (001), (101), (111) grains because of the segregation along dendrite boundary.

• 대한지역사회영양학회지
• /
• 제3권1호
• /
• pp.120-132
• /
• 1998

A major goal of the Community Plant Food Project is to develop partnerships between the Cornell Community Nutrition Program and Community-based organizations, including Cooperative Extension. A core principle behind this work is integrating research and intervention. Based on our work in Rochester, New York, we have developed a process and principles for effective partnerships. This new paradigm what we call the University-Community Partnership Model is a team effort that builds on the experiential literature in the fields of communication, leadership, community and team development, sociology, and participatory research and action. We have applied this model both to increase our understanding of Family Food Decision-making and to develop programs for families. In this project, we have used a variety of qualitative methods to understand food decisions from the perspectives of families and community stakeholders, including a group method for analyzing our qualitative interview data. For our survey of families, we developed the Enhanced Response Method, an approach for improving the validity and reliability of community surveys with families and, at the same time, building relationships with families and other stakeholders in the community for integrated and sustainable interventions. Because the knowledge we develop through the partnership and the interventions we seek to implement are products of the process, we are constantly seeking to refine this knowledge and to adapt emerging interventions through an ongoing evaluation process we call the Continuous Improvement Method.

• 공학교육연구
• /
• 제19권4호
• /
• pp.83-88
• /
• 2016

In this paper, we surveyed from students and professors of Hanbat National University to examine the current state of running the introductory engineering design and to derive the direction of future improvements of the subject. A total of 783 students from nine departments and 12 professors who are in charge of the introductory engineering design participated in the present questionnaire evaluation. Outcome categories of the interest in their major and the learning of design theory appears relatively lower than other learning outcomes of the introductory engineering design course. Accordingly, it is determined that the theoretical aspects of designing should be emphasized in performing a team project. The design process, writing and presentation ability, teamwork theory are dealt in more than 70% of the departments, but engineering ethics, patent, visualization education had not been addressed in a number of departments due to their department characteristics. While a lesson outcome of the creativity resulted in the largest for the students, most of the professor feel difficult in increasing the creativity. It is urgent to develope of teaching methods in order to promote the creativity in the introductory engineering design course.

• 한국재료학회지
• /
• 제16권2호
• /
• pp.80-84
• /
• 2006

The removal efficiency of Cu and Fe contaminants on the silicon wafer surface was examined to investigate the effect of cleaning solutions on the behavior of metallic impurities. Silicon wafers were intentionally contaminated with Cu and Fe solutions by spin coating and cleaned in different types of cleaning solutions based on $NH_4OH/H_2O_2/H_2O\;(SC1),\;H_2O_2/HCl/H_2O$ (SC2), and/or HCl/$H_2O$ (m-SC2) mixtures. The concentration of metallic contaminants on the silicon wafer surface before and after cleaning was analyzed by vapor phase decomposition/inductively coupled plasma-mass spectrometry (VPD/ICP-MS). Cu ions were effectively removed both in alkali (SC1) and in acid (SC2) based solutions. When $H_2O_2$ was not added to SC2 solution like m-SC2, the removal efficiency of Cu impurities was decreased drastically. The efficiency of Cu ions in SC1 was not changed by increasing cleaning temperature. Fe ions were soluble only in acid solution like SC2 or m-SC2 solution. The removal efficiencies of Fe ions in acid solutions were enhanced by increasing cleaning temperature. It is found that the behavior of metallic contaminants as Cu and Fe from silicon surfaces in cleaning solutions could be explained in terms of Pourbaix diagram.

• Wind and Structures
• /
• 제37권2호
• /
• pp.79-94
• /
• 2023

This paper traces the drafting of the new EN 1991-1-4 Eurocode 1 - Actions on structures - Part 1-4: General actions - Wind actions within Mandate M/515 of the European Commission to CEN, for the evolution of structural Eurocodes towards their Second Generation. Work of the Project Team started in August 2017 and ended in April 2020, with delivery of a final draft for public enquiry. The revised document contains several modifications with respect to the existing 2005 version, and new sections were added, covering aspect not dealt with in the previous version. It has a renovated structure, with a main text limited in size and containing only fundamental material; all the remaining information, either normative or informative is arranged into thirteen annexes. Common to other Eurocode Parts, general requests from CEN were those of reducing the number of Nationally Determined Parameters and of enhancing the ease of use. More specific requests were those of (a) the drafting of a European design wind map, (b) improving wind models, (c) reviewing force and pressure coefficients, (d) reviewing the procedures for evaluation of the dynamic response, as well as (e) making editorial improvements aimed at a more user friendly document. The author had the privilege to serve as Project Team member for the drafting of the new document, and this paper brings his personal view concerning some general aspects of wind code writing, and some more specific aspects about the particular document.

• Asia pacific journal of information systems
• /
• 제33권4호
• /
• pp.1171-1187
• /
• 2023

This study explores how an organization has successfully implemented ML-supported HR services to resolve high employee turnover problems in the IT sector. The empirical setting of the research is where contradicting institutional logics exist among technical, HR, and business groups regarding the ML model development and use of the model predictions in HR services. Institutional framework is used to identify the roles of organizational actors and the legitimacy structures in the organizational environments that can shape or constrain the ML led organizational changes. In institutional theories, technology adoption and organizational change are not only constrained by organizational context, but also fostered through organizational actors' roles and efforts to increase the legitimacy for the change. This research found that when multiple contradicting institutional logics exist, legitimizing the establishment of an enabling environment for multiple logics to reconcile and for the project to move forward is critical. Industry-wide conditions, previous experiences with the pilot ML project, forming a TFT with clearly defined roles and responsibilities, and relevant KPIs are found to legitimize the HR team and the business division to collaborate with the technical personnel to launch ML-supported HR services.

• 방송공학회논문지
• /
• 제9권4호
• /
• pp.411-423
• /
• 2004

국내의 디지털 오디오 방송 방식으로 잠정 결정되었던 유럽의 Eureka-147 DAB (Digital Audio Broadcasting)가 기술적으로 취약한 지상과 DTV의 이동수신 영역을 보완하기 위하여 종합 멀티미디어 방송인 DMB (Digital Multimedia Broadcasting)로 진화하였다. 지상파 DMB (T-DMB)에 비디오 서비스를 도입함에 따라 이에 대한 가능성을 검증하기 위하여 정보통신부 국책과제인 '지상파 DMB 동영상 실험방송'이 실시되었다. 과제의 주요 목적은 T-DMB 방송망 구축 및 송수신 장비의 개발에 필요한 유효전계강노와 비디오 서비스 방송구역을 산정하는 것이다. 디지털 방송의 경우 송신기의 커버리지와 수신 품질을 조사하기 위해서는 비트오류율 (BER : Bit Error Rate)과 전계강도의 측정이 필수적이다. 본 논문은 T-DMB를 위한 통합 이동 측정 시스템 개발에 관한 것이다. 이를 위하여 비트오류율 측정을 위한 효율적인 데이터 구조와 알고리듬을 제안하였다. 이에 따라 구현된 비트오류율 측정부에 전계강도 측정부와 GPS (Global Positioning System) 수신부를 추가하여 통합 이동 측정 시스템을 완성하였고, 실험과 필드 테스트를 통해 검증하였다. 개발된 통합 이동 측정 시스템은 '지상과 DMB 동영상 실험방송 과제'에 사용되었으며, 측정결과는 T-DMB 방송망 구축을 위한 기본 자료로 사용될 예정이다.