• Journal of the Institute of Convergence Signal Processing
• /
• v.4 no.4
• /
• pp.7-14
• /
• 2003

A number of embedded wavelet image coding methods have been proposed since the introduction of EZW(Embedded Zerotree Wavelet) algorithm. A common characteristic of these methods is that they use fundamental ideas found in the EZW algorithm. Especially, one of these methods is the SPIHT(Set Partitioning in Hierarchy Trees) algorithm, which became very popular since it was able to achieve equal or better performance than EZW without having to use an arithmetic encoder. In this paper We propose a recursive set partitioning in hierarchy trees(RSPIHT) algorithm for embedded image coding and evaluate it's effectiveness experimentally. The proposed RSPIHT algorithm takes the simple and regular form and the worst case time complexity of O(n). From the viewpoint of processing time, the RSPIHT algorithm takes about 16.4% improvement in average than the SPIHT algorithm at T-layer over 4 of experimental images. Also from the viewpoint of coding rate, the RSPIHT algorithm takes similar results at T-layer under 7 but the improved results at other T-layer of experimental images.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.20 no.4
• /
• pp.263-273
• /
• 2010

Occupational exposure to wollastonite can occur during its mining, processing and using. Wollastonite was analyzed for its physicochemical properties by transmission electron microscope and scanning electron microscope equipped with energy dispersive X-ray spectrometer. Wollastonite fibers were 3.3${\mu}m$ in diameter(av.) and were 30.5${\mu}m$ in length(av.). The atomic composition of wollastonite was Si 56.41% and Ca 43.59%. Respiratory toxicity of wollastonite has been studied in term sequential in Sprague-Dawely rats. UICC chrysotile (average diameter 0.03${\mu}m$, average length 2.93${\mu}m$) was applied as the positive control. The effects of 2mg wollastonite on respiratory system and pathological changes were evaluated after 1, 4, 8, 12 weeks instilled into rat lungs. Inflammation response broke out from 1 week after instilled with wollastonite and the pathological examination further showed increased legions of granulomatous inflammation after 4 weeks, but decreased granulomatous inflammation after 8 weeks, whereas chrysotile induced progressive interstitial granulomatous inflammation and fibrosis as a function of time.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.15 no.3
• /
• pp.159-166
• /
• 2003

In this study, we develop a finite element model to directly solve the Laplace equation while keeping the same computational efficiency as the models based on the extended mild-slope equation which has been widely used for calculation of wave transformation in shallow water. For this, the computational domain is discretized into finite elements with a single layer in the vertical direction. The velocity potential in the element is then expressed in terms of the potentials at the nodes located at water surface, and the Galerkin method is used to construct the numerical model. A common shape function is adopted in horizontal direction, and the cosine hyperbolic function in vertical direction, which describes the vertical behavior of progressive waves. The model was developed for vertical two-dimensional problems. In order to verify the developed model, it is applied to vertical two-dimensional problems of wave reflection and transmission. It is shown that the present finite element model is comparable to the models based on extended mild-slope equations in both computational efficiency and accuracy.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.4
• /
• pp.335-343
• /
• 2001

The conventional wavelet-based fractal image coding has the disadvantage that the encoding takes a long time, since each range block finds the best domain in the image. In this Paper, we propose wavelet-based fractal image coding using SAS(Self Affine System) method and multi-scale factor. It consists of the range and domain blocks in DWT(discrete wavelet transform) region. Using SAS method, the proposed method is that the searching process of the domain block is not required, and the range block selects the domain which is relatively located the same position in the upper level. The proposed method can perform a fast encoding by reducing the computational complexity in the encoding process. In order to improve the disadvantage of SAS method which is reduced image qualify, the proposed method is improved image qualify using the different scale factors for each level. As a result, there is not influence on an image quality, the proposed method is enhanced the encoding time and compression ratio, and it is able to the progressive transmission.

• Geomechanics and Engineering
• /
• v.20 no.5
• /
• pp.461-474
• /
• 2020

Analysing the incompatible deformation and damage evolution around the tunnels in mixed strata is significant for evaluating the tunnel stability, as well as the interaction between the support system and the surrounding rock mass. To investigate this issue, confined compression tests were conducted on upper-soft and lower-hard strata specimens containing a circular hole using a rock testing system, the physical mechanical properties were then investigated. Then, the incompatible deformation and failure modes of the specimens were analysed based on the digital speckle correlation method (DSCM) and Acoustic Emission (AE) data. Finally, numerical simulations were conducted to explore the damage evolution of the mixed strata. The results indicate that at low inclination angles, the deformation and v-shaped notches inside the hole are controlled by the structure plane. Progressive spalling failure occurs at the sidewalls along the structure plane in soft rock. But the transmission of the loading force between the soft rock and hard rock are different in local. At high inclination angles, v-shaped notches are approximately perpendicular to the structure plane, and the soft and hard rock bear common loads. Incompatible deformation between the soft rock and hard rock controls the failure process. At inclination angles of 0°, 30° and 90°, incompatible deformations are closely related to rock damage. At 60°, incompatible deformations and rock damage are discordant due that the soft rock and hard rock alternately bears the major loads during the failure process. The failure trend and modes of the numerical results agree very well with those observed in the experimental results. As the inclination angles increase, the proportion of the shear or tensile damage exhibits a nonlinear increase or decrease, suggesting that the inclination angle of mixed strata may promote shear damage and restrain tensile damage.

• Journal of KIISE:Computer Systems and Theory
• /
• v.36 no.6
• /
• pp.511-520
• /
• 2009

In this paper, we present a new iso-density surface reconstruction scheme based on a hierarchy on the input volume data and the output mesh data. From the input volume data, we construct a hierarchy of volumes, called a volume pyramid, based on a 3D dilation filter. After constructing the volume pyramid, we extract a coarse base mesh from the coarsest resolution of the pyramid with the Cell-boundary representation scheme. We iteratively fit this mesh to the iso-points extracted from the volume data under O(3)-adjacency constraint. For the surface fitting, the shrinking process and the smoothing process are adopted as in the SWIS (Shrink-wrapped isosurface) algorithm[6], and we subdivide the mesh to be able to reconstruct fine detail of the isosurface. The advantage of our method is that it generates a mesh which can be utilized by several multiresolution algorithms such as compression and progressive transmission.

• Korean Journal of Animal Reproduction
• /
• v.18 no.3
• /
• pp.191-197
• /
• 1994

It is generally known that mutations in any of several genes encoding photoreceptor-specific proteins have resulted in retinitis pigmentosa (RP), a disease characterized by losing photoreceptor function with progressive degeneration of photoreceptor cells and eventually leading to blindness. To study the procure and cure of photoreceptor degeneration, we produced transgenic mice. Transgene consisted of a 12.5kb genomic DNA fragment that contains mutated pig rhodopsin gene (Pro-347-Ser) including both the 5'-franking (4.0 kb) and the 3'-franking (2.9 kb) sequences. This gene was used for the production of transgenic mouse. The mutated rhodopsin DNA was microinjected into male pronuclei of fertilized mouse (C57BL /6]) embryos. We detected transgenic animals harboring mutated rhodopsin gene by PCR and Southern blot analysis. These transgenic mice showed stable transmission of microinjected rhodopsin gene into their offspring. Therefore these animals will provide a novel approach to study the mechanism of the photoreceptor degeneration and be provided as a disease model for the treatment of the blind in human.

• Restorative Dentistry and Endodontics
• /
• v.24 no.4
• /
• pp.614-622
• /
• 1999

Recent studies have implicated that more rostral components of the trigeminal spinal nucleus including subnucleus oralis (Vo) in orofacial nociceptive mechanisms. Since there is only limited electrophysiological evidence, the present study was initiated to characterize the receptive field and response properties of malls nociceptive neurons in chloralose/urethan-anesthetized rats. Single neuronal activity was recorded in right subnucleus oralis, and types of nociceptive neurons classified wide dynamic range (WDR), NS (nociceptive specific) and deep nociceptive (D) and the mechanoreceptive field (RF) and response properties were determined. A total of 34 nociceptive neurons could be subdivided into 17WDR neurons, 12NS neurons and 5D neurons. Vo nociceptive neurons had RF involving maxillary and/or mandibular divisions mainly located in the intraoral and/or perioral regions. Majority of Vo nociceptive neurons showed spontaneous activity less than 1Hz. The NS and D neurons activated only by heavy pressure and/or pinch stimuli had high mechanical thresholds compared to WDR neurons activated also by tactile stimuli. Vo nociceptive neurons showed a progressive increase of response to the graded mechanical stimuli. 39% of Vo nociceptive neurons received C-fiber electrical input as well as A-fiber electrical input from their RF, and 45% of them responded to electrical stimulation of the right maxillary first molar. 41% of Vo nociceptive neurons responded to noxious heat applied to their RF, and 18% of them showed an immediate burst of discharges following MO application to the right maxillary first molar pulp. These results indicate that Vo is involved in the transmission of nociceptive information mainly coming from intraoral or perioral region including tooth pulp.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.4
• /
• pp.227-234
• /
• 2012

PURPOSE. The aims of this pilot study were to introduce implant loading devices designed for animal study and to evaluate the validity of the load transmission ability of the loading devices. MATERIALS AND METHODS. Implant loading devices were specially designed and fabricated with two implant abutments and cast metal bars, and orthodontic expansion screw. In six Beagles, all premolars were extracted and two implants were placed in each side of the mandibles. The loading device was inserted two weeks after the implant placement. According to the loading protocol, the load was applied to the implants with different time and method, simulating early, progressive, and delayed loading. The implants were clinically evaluated and the loading devices were removed and replaced to the master cast, followed by stress-strain analysis. Descriptive statistics of remained strain (${\mu}{\varepsilon}$) was evaluated after repeating three cycles of the loading device activation. Statistic analysis was performed using nonparametric, independent t-test with 5% significance level and Friedman's test was also used for verification. RESULTS. The loading devices were in good action. However, four implants in three Beagles showed loss of osseointegration. In stress-strain analysis, loading devices showed similar amount of increase in the remained strain after applying 1-unit load for three times. CONCLUSION. Specialized design of the implant loading device was introduced. The loading device applied similar amount of loads near the implant after each 1-unit loading. However, the direction of the loads was not parallel to the long axis of the implants as predicted before the study.

• Journal of Biomedical Engineering Research
• /
• v.15 no.3
• /
• pp.333-340
• /
• 1994

Laboratory information system (LIS) is a key tool to manage laboratory data in clinical pathology. Our department has developed an information system for routine hematology using down-sized computer system. We have used an IBM 486 compatible PC with 16 MB main memory, 210 MB hard disk drive, 9 RS-232C port and 24 pin dot printer The operating system and database management system were SCO UNIX and SCO foxbase, respectively. For program development, we used Xbase language provided by SCO foxbase. The C language was used for interface purpose. To make the system use friendly, pull-down menu was used. The system connected to our hospital information system via application program interface (API), so the information related to patient and request details is automatically transmitted to our computer. Our system interfaced with two complete blood count analyzers (Sysmex WE-8000 and Coulter STKS) for unidirectional data transmission from analyzer to computer. The authors suggests that this system based on down-sized computer could provide a progressive approach to total LIS based on local area network, and the implemented system could serve as a model for other hospital's LIS for routine hematology.