• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1165-1171
• /
• 2013

2003년 이후 국내 건설회사의 해외 건설수주액이 급격히 늘어나고 있다. 해외 플랜트 공사는 시공사의 EPC와 사업관리 능력이 성패를 좌우한다. 시공사의 사업관리 능력 제고하기 위해서는 건설성과를 측정하고 평가하는 과정이 필요하다. 따라서 본 논문은 해외 플랜트 참여사들의 건설성과 벤치마킹을 위한 프로그램을 개발하였다. 건설 성과지표는 사업비, 공기, 품질, 안전 등으로 구성되어 있다. 그리고 해외에서 수행된 플랜트 공사 10개의 자료를 입수하여 성과를 분석하였다. 해외 플랜트 공사 벤치마킹 프로그램을 개발하는 과정에서 업계의 피드백과 교훈을 제시하였다. 그리고 본 프로그램이 지속적으로 활용되기 위해 고려해야 할 사항을 제안하였다.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.232-237
• /
• 2015

Purpose: In Korea, wheat is dried using circulating cross-flow grain dryers. However, there is no research on wheat drying which can be utilized for the dryers. Therefore, this study developed and evaluated a simulation of the circulating cross-flow dryer, and examined the effects of various factors on drying performance. Methods: The simulation program was developed using drying models and was evaluated against wheat-drying experiments with a dryer having a 30-ton capacity. The influence of drying temperature, air volume, and grain falling rate on drying performance were examined through the simulation. Results: The experimental results validated the simulation program by showing the same root mean square error (RMSE) for moisture content (0.286%) and drying rate (0.056%/h) in both the experimental data and the simulation values. The appropriate wheat-drying parameter values, considering drying conditions, were determined to be $50^{\circ}C$ for drying temperature, $500m^3/min$ for air volume, and a grain falling rate of $36.0m^3/h$. Conclusions: The developed simulation program for circulating cross-flow dryers analyzed the influences of performance factors such as drying temperature, air volume, and falling rate on drying performance.

• Computers and Concrete
• /
• 제4권5호
• /
• pp.331-346
• /
• 2007

A computer program was developed to analyze the non-linear, cyclic flexural performance of reinforced concrete structural members under various types of loading paths including non-sequential variations in axial load. This performance is significantly affected by the loading history. Different monotonic material models as well as hysteresis rules for confined and unconfined concrete and steel, some developed and calibrated against test results on material samples, were implemented in a fiber-based moment-curvature and in turn force-deflection analysis. One of the assumptions on curvature distribution along the member was based on a method developed to address the variation of the plastic hinge length as a result of loading pattern. Functionality of the program was verified by reproduction of analytical results obtained by others for several cases, and accuracy of the analytical process and the implemented models were evaluated against the experimental results from large-scale reinforced concrete columns tested under the analyzed loading cases. While the program can be used to predict the response of a member under a certain loading pattern, it can also be used to examine various analytical models and methods or refine a custom material model against test data.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.114-128
• /
• 2016

The development of operational performance indicators is of utmost importance for nuclear power plants, since they measure, track, and trend plant operation. Leading indicators are ideal for reducing the likelihood of consequential events. This paper describes the operational data analysis of the information contained in the Corrective Action Program. The methodology considers human error and organizational factors because of their large contribution to consequential events. The results include a tool developed from the data to be used for the identification, prediction, and reduction of the likelihood of significant consequential events. This tool is based on the resilience curve that was built from the plant's operational data. The stress is described by the number of unresolved condition reports. The strain is represented by the number of preventive maintenance tasks and other periodic work activities (i.e., baseline activities), as well as, closing open corrective actions assigned to different departments to resolve the condition reports (i.e., corrective action workload). Beyond the identified resilience threshold, the stress exceeds the station's ability to operate successfully and there is an increased likelihood that a consequential event will occur. A performance indicator is proposed to reduce the likelihood of consequential events at nuclear power plants.

• Journal of Electrical Engineering and Technology
• /
• 제13권1호
• /
• pp.181-191
• /
• 2018

Rapid development of information technology makes our environment become smarter and massive high performance computers are providing powerful computing for that. Graphics Processing Unit (GPU) as a typical high performance component is being widely used for both graphics and general-purpose applications. Although it can greatly improve computing power, it also delivers significant power consumption and need sufficient power supplies. To make high performance computing more sustainable, the important step is to measure it. Current power technologies for GPU have some drawbacks, such as they are not applicable for power estimation at the early stage. In this article, we present a novel power technology to correlate power consumption and the characteristics at the programmer perspective, and then to estimate power consumption of source program without prerunning. We conduct experiments on Nvidia's GT740 platform; the results show that our power model is more accurately than regression model and has an average error of 2.34% and the maximum error of 9.65%.

• 한국식품영양학회지
• /
• 제32권5호
• /
• pp.536-552
• /
• 2019

The purpose of this study was to develop a standardized job description for dietitians using the DACUM technique. To examine the validity of job description through DACUM, dietitians were surveyed relative to importance, performance, and difficulty. The survey was conducted April 1-30, 2014. A total of 217 questionnaires were used in the analysis. The final developed job description for dietitians included six duties, 38 tasks, and 210 task elements. DACUM's findings include six duties: nutrition management, food service operation management, hygiene safety management, community food and nutrition program management, organization management, and professionalism strengthening. There were 5.1 points regarding importance, 4.1 points regarding performance, 4.9 points regarding difficulty, and statistically significant differences (p<0.001). Dietitians responded that 'nutrition management' and 'hygiene safety management' were the most important. 'Hygiene and safety management' showed the highest performance, and 'community food and nutrition program management' and 'professionalism strengthening'' showed the highest difficulty. Thus, it is considered that the job analysis results can be used to evaluate and improve the subjects' training program. Dietitians' jobs are subject to various environmental changes, such as demographic changes, health care system changes, and the development of the food industry, and thus, should be reviewed and analyzed periodically.

• 한국컴퓨터정보학회논문지
• /
• 제19권12호
• /
• pp.21-29
• /
• 2014

본 논문에서는 효율적인 로봇공연시스템(RPS:Robot Performance System)을 제안한다. 본 논문에서 제안하는 로봇공연시스템은 외부 음향재생장치의 도움 없이 휴머노이드 로봇 몸체에 개발한 사운드보드를 삽입하여 음향을 재생하고 공연에 필요한 음원을 사운드보드내의 외부기억장치에 기억할 수 있도록 하드웨어를 개발하였다. 또한 공연 기획 시나리오 생성 전문 소프트웨어인 RPPDP(Robot Performance Planning Development Program)를 개발하였는데, RPPDP를 이용하면 기존에 개발된 로봇의 기본동작, 응용동작 및 특별한 상황에 적용되는 동작 등을 모션데이터베이스에서 검색하여 사용할 수 있어서, 적은 비용과 짧은 시간으로 누구나 쉽게 로봇공연을 기획할 수 있도록 하였다.

• 가정간호학회지
• /
• 제29권2호
• /
• pp.216-224
• /
• 2022

Purpose: This study aimed to investigate the influence of the perception of the importance of patient safety management and culture on employees' safety performance in small and medium -sized hospitals. Methods: The participants comprised 119 hospital employees, including nurses, doctors, and medical technicians. Data were analyzed through descriptive statistics, t-test, ANOVA, Pearson's correlation coefficients, and multiple regression analysis using the SPSS program. Results: The mean safety performance was 4.09±0.34, mean safety compliance was 4.12±0.44, and safety participation was 4.06±0.38. There were significant differences in safety performance by gender and job. Safety performance and its assocation with both perception of importance on patient safety management and, perception of patient safety culture showed a positive correlation. Safety performance was influenced by the perception of patient safety culture. The explanatory power was 15.7%. Conclusion: Based on these results, improving the perception of patient safety culture is necessary to increase safety performance. To this end developing and applying an interprofessional safety performance education program for employees in small and medium-sized hospitals is vital.

• 근관절건강학회지
• /
• 제5권1호
• /
• pp.39-56
• /
• 1998

This study was an quasi-experimental study, done to identify factors Influencing the reduction of symptoms in patients with fibromyalgia. The primary purpose of the study was to develop a Self-Help Program suitable for patients with fibromyalgia in Korea. The secondary purpose was to identify the effects of a Self-Help Program which included stretching exercise. This study was carried out between Feb. 24 and July 8, 1997 and patients in the study Included out patient diagnosed with fibromyalgia based on the criteria developed by the American College of Rheumatology(1990) and H, University which is a tertiary patient care clinic for Rheumatism. The experimental group included 38 patients who were residents of Seoul or Kyungi province, and a control group of 38 patients who were residents of other areas. The control patients were matched to the experimental group patients and they were selected considering the number of tender points on the Fibromyalgia Impact Questionnaire score and a score of self-efficacy. The experimental group participated in a Self-Help Program based on the American Arthritis Foundation(1995) guidelines. The program participants participated in a small group which consisted of 12-15 members attending the program once a week, for 6 weeks with each program lasted two to two and a half hours. The stretching exercise was carried out in each patient's home every day following the video tape exercise provided by the researcher, and the researcher provided encouragement and concern to the patients by calling them once a week. The number times the exercise was performed was divided by the number of participants to calculate the percentage of performance and determine the amount of exercise. Self-efficacy was measured by the Self-Efficacy Scale developed by Lorig et al. (1989) for arthritis patients. The degree of pain was converted to scores based on the Visual Analog Scale, the number of tender points was converted to scores based on the criteria of the ACR(1990) and of Yunus. Depression was measured by CES-D and physical disability, sleep disturbance, fatigue, and anxiety of patients with fibromyalgia were measured by the Fibromyalgia Impact Questionnaire. The level of the exercise performance was converted to scores using the number of times the exercise was performed following the video tape prepared by Association of Rheumatology Health Professionals. Data were analyzed by SPSS windows and the results ire described below. 1. The experimental group which participated in the Self-Help Program showed higher efficacy scores than the control group when both groups were analyzed for depression and the number of tender points as common variables(F=9.146, p=.003). 2. The experimental group which participated in the Self-Help Program showed lower scores than the control group, for pain, the number of tender points, depression, physical disability, fatigue, sleep disturbance and anxiety. These symptoms of fibromyalgia can all be seen to have subsided(F=9.483, p=.003 : F=32.680, p=.001 ; F=11.104, p=.001, F=5.344 : p=.024, F=7.630 : P=.007, F=15.6512, p=.003 : F= 7.5412, p=.008). 3. In the experimental group, the self-efficacy score for the first three weeks showed a positive correlation with the exercise-performance score for four to six weeks (r=.387, p=.043). 4. In the experimental group, the relationship between the level of exercise-performance and the reduction of symptoms showed a significant correlation only to physical disability(r= -.500, p=.001). 5. In the experimental group, the relationship between the self-efficacy score and pain, the number of tender points, depression, physical disability, fatigue, sleep disturbance and anxiety score showed inverse correlations and thus, a reduction of symptoms occured when the self-efficacy score increased(r=-.325, p=.004 ; r= -.253, p=.027, r=-.452, p=.001 : r=-.434, p=.001 ; r=-.316, p=.005 ; r=-.460, p=.001 ; r=-.397, p=.014). Therefore, self-efficacy improved following the Self-Help Program including the stretching exercise. It was also found that physical symptoms (pain, number of tender points, level physical disability) and psychological symptoms (depression, fatigue, sleep disturbance, anxiety) were reduced. Moreover, It was found that the higher the self-efficacy, the the higher the degree of achievement of goals set for the stretching exercises. In addition, the level of exercise-performance influenced the level of physical disability, one of the symptoms of fibromyalgia. Accordingly, the conclusions from this study are that exercise-performance and the reduction of symptoms is achieved through promotion of self-efficacy. Therefore, it is proposed that are the Self-Help Program including stretching exercises is an appropriate nursing intervention for the reduction of symptoms of fibromyalgia.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2005년도 춘계학술대회
• /
• pp.83-83
• /
• 2005