• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.983-989
• /
• 2015

Power transformer is one of the major and key apparatus in electric power system. Monitoring and diagnosis of transformer fault is necessary for improving the life period of transformer. The failures caused by short circuits are one of the causes of transformer outages. The short circuit currents induce excessive forces in the transformer windings which result in winding deformation affecting the mechanical and electrical characteristics of the winding. In the present work, a transformer producing only the radial flux under short circuit is considered. The corresponding axial displacement profile of the windings is computed using Finite Element Method based transient structural analysis and thus obtained displacements are compared with the experimental result. The change in inter disc capacitance and mutual inductance of the deformed windings due to different short circuit currents are computed using Finite Element Method based field analyses and the corresponding Sweep Frequency Responses are computed using the modified electrical equivalent circuit. From the change in the first resonant frequency, the winding movement can be quantified which will be useful for estimating the mechanical withstand capability of the winding for different short circuit currents in the design stage itself.

• 한국통신학회논문지
• /
• 제30권10C호
• /
• pp.983-991
• /
• 2005

드라마와 같은 비디오에서 사람의 얼굴은 일반적으로 자주 등장하며 비디오 내용을 분석하기 위한 유용한 정보를 제공한다. 얼굴검출은 얼굴인식 및 얼굴영상의 DB 관리와 같은 응용분야에 중요한 역할을 한다. 본 논문에서는 비디오 등장인물 검색을 위한 얼굴검출 기법을 제안하였다. 전체 과정은 크게 세단계로 구성되며 첫 번째 장면전환 검출단계, 두 번째 얼굴영역 검출단계, 마지막으로 얼굴의 특징점인 눈과 입 검출단계로 구성되며, 색상에 기반한 얼굴영역 검출단계에서 발생된 얼굴 특징점을 눈과 입의 검출에 적용하였다. 실험결과 다양한 환경에서 성공적으로 얼굴을 검출하며, 기존의 색상기반 얼굴검출 방법에 비해 측면영상에서 $24\%$의 성능향상을 보였다.

• 한국정밀공학회지
• /
• 제18권12호
• /
• pp.60-65
• /
• 2001

To simulate the real molding conditions, the effects of phase change and compressibility of the resin were considered in the present investigation. A modified Cross model with either an Arrhenius-type or WLF-type functional form was used for modeling viscosity of the resin. A double-domain Tait equation of state was employed to describe the compressibility of the resin during molding. The energy balance equation including latent-heat dissipation fur semi-crystalline materials was solved in order to predict the solidified layer and temperature profile. Injection molding experiments were carried out using polypropylene(PP) in the present study. Based on the comparison between experiments and simulations, it was found out the predicted pressure distributions and melt front propagations were accurate. Thus it was concluded that the program developed in this study was proved to be useful in simulations of injection molding process.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.87-94
• /
• 2019

본 논문에서는 무인항공기가 수명주기 동안 노출될 수 있는 운용 환경조건 입증을 위한 시험절차를 제안한다. 시험절차는 국방과학연구소 초대형 기후환경 챔버에서 시스템 요구조건을 입증할 수 있도록 수립되었다. 다양한 환경조건 중 비행체 단위에서 요구받는 강우, 습도 및 온도(저온 저장, 저온 운용, 고온 운용 및 일광(고온 저장)) 환경조건에 대하여 MIL-STD-810G w/Change 1을 기반으로 수립된 시험단계와 상세 프로파일에 대해 제안하였다.

• 대한건축학회논문집:구조계
• /
• 제34권5호
• /
• pp.51-58
• /
• 2018

The purpose of this study was to analyze the effect of seasonal change in characteristics of hygiene activity on domestic hot water energy consumption. With 16 residents of 4 households, the data about frequency of hygiene activity and water temperature was collected from February to August, 2017. The results of collected data discovered that the frequency of hygiene activity was higher especially in summer, whereas the consumption of warm water they used was higher in winter. The seasonal change in characteristics of hygiene activity was analyzed to be changed and strongly influenced by outdoor temperature. The influence of characteristics of hygiene activity on hot water consumption was analyzed. There was 13% of difference between consumption that was calculated taking characteristics of hygiene activity into account and consumption that was not. Therefore, this study suggested hygiene activity schedule, hot water profile and hot water consumption pattern, which can be utilized for improving simulation as well.

• Membrane and Water Treatment
• /
• 제13권5호
• /
• pp.219-225
• /
• 2022

5th Assessment Report of the Intergovernmental Panel on Climate Change Weather (AR5) predicts that recent severe hydrological events will affect the quality of water and increase water pollution. To analyze changes in water quality due to future climate change, input data (precipitation, average temperature, relative humidity, average wind speed, and solar radiation) were compiled into a representative concentration curve (RC), defined using 8.5. AR5 and future use are calculated based on land use. Semi-distributed emission model Calculate emissions for each target period. Meteorological factors affecting water quality (precipitation, temperature, and flow) were input into a multiple linear regression (MLR) model and an artificial neural network (ANN) to analyze the data. Extensive experimental studies of flow properties have been carried out. In addition, an Acoustic Doppler Velocity (ADV) device was used to monitor the flow of a large open channel connection in a wastewater treatment plant in Ho Chi Minh City. Observations were made along different streams at different locations and at different depths. Analysis of measurement data shows average speed profile, aspect ratio, vertical position Measure, and ratio the vertical to bottom distance for maximum speed and water depth. This result indicates that the transport effect of the compound was considered when preparing the hazard analysis.

• Archives of Plastic Surgery
• /
• 제32권5호
• /
• pp.547-554
• /
• 2005

Orthognathic surgery for Class III malocclusion requires an elaborate preoperative planning using cephalometries or Mock surgery models which enable the surgeon to anticipate postoperative skeletal changes of maxilla and mandible as well as dentition. After surgery, patient's satisfaction is greatly influenced by appearance of soft tissue change. Therefore, it is imperative to predict a relatively accurate soft tissue change prior to surgery. A 5 year retrospective study was designed to evaluate the soft tissue change after sagittal split osteotomy of ramus(SSRO) for class III malocclusion. Analyses of preoperative and postoperative anthropometric measurements were performed. Patients who were treated only by SSRO for class III malocclusion and could follow up for 6 months were studied. Among them, the patients who had history of cleft palate and lip or hemifacial microsomia were excluded. Soft tissue changes were estimated by using the frontal and lateral photographs. Skeletal changes were observed by measuring amount of set back and angular changes of mandible to the reference line by using cephalometries. Relapses were also measured 6 months after the operation. We could observe skeletal changes were more profound than soft tissue changes concerning amount of set back, but soft tissue changes were also profound in angle. Relapse was more profound in skeleton than soft tissue but the amount was not significant. In spite of the variables which may affect proper assessment of the soft tissue change after skeletal relocation, this study can serve as a guide for exact prediction of the postoperative change of soft tissue and skeleton.

• 한국토양비료학회지
• /
• 제48권6호
• /
• pp.593-601
• /
• 2015

The NDVI (Normalized difference vegetation index) is used as indicators of crop growth situation in remote sensing. To measure or validate the NDVI, reliable NDVI sensors have been needed. We tested new fixed-field NDVI sensor, "SRS (Spectral Reflectance Sensor)" developed by Decagon Devices, during Kimchi cabbage growing season at the cultivation area located in Gochang, Gangneung and Taebaek in Korea from 2014 to 2015. The diurnal variation of NDVI measured by SRS (SRS NDVI) showed a slight ${\cap}$-profile shape and was affected by water on the sensor surface. This means that SRS NDVI around noontime is resonable, except rainy day. Comparisons were made between the SRS NDVI and NDVI of used widely mobile sensor (Cropcircle NDVI). The comparisons indicate that SRS NDVI are close to Cropcircle NDVI (R=0.99). SRS NDVI time series displayed change of the plant height and leaf width of Kimchi cabbage. An obvious exponential relationship is found between SRS NDVI and the plant height ($R^2{\geq}0.92$) and leaf width ($R^2{\geq}0.92$) of Kimchi cabbage. Thus, SRS NDVI will be used as indicator of crop growth situation and a very powerful tool for evaluation of remote sensing NDVI estimates and associated corrections.

• 한국철도학회논문집
• /
• 제15권6호
• /
• pp.543-549
• /
• 2012

본 연구는 차세대 분산형 고속전철 시제차량(HEMU-430X)의 후미진동저감에 관한것이다. VAMPIRE 해석을 통한 주행거동 관찰에서 HEMU-430X는 전두부 유선형 형상유지를 위하여 설치된 한방향 요댐퍼 때문에 후미차량에서 횡방향 진동이 예상되었으며, 430km/h에서 기준치를 초과하는 경우가 있었다. 이 후미진동을 감소시키기 위하여 차륜답면 형상변경, 횡댐퍼 댐핑계수조정, 요댐퍼 계수조정 등 다양한 방법을 시도하였으나 후미진동이 없어지지 않았다. 최종적으로 요댐퍼를 양방향으로 바꾸었을 때 횡방향 진동이 사라졌다. 실제 시운전에서는 150km/h로 주행하였을 때 횡방향 후미진동이 나타났으며, 요댐퍼를 양방향으로 바꾸어 300km/h 주행 시에도 후미진동이 나타나지 않았다. 추후 430km/h까지 최고속도시험을 수행할 예정인데 높은 속도에서 후미진동이 다시 발생한다면 본 연구에서 제시한 차륜답면 형상변화, 횡댐퍼 계수 조정 등의 방법을 이용해서 진동을 저감시킬 수 있을 것이다.

• Restorative Dentistry and Endodontics
• /
• 제23권1호
• /
• pp.257-268
• /
• 1998

During cleaning and shaping of narrow and curved canals, it is very difficult or nearly impossible to maintain the original canal shape. Procedural accidents such as, ledge, zipping, perforation, and instrument breakage are frequently occurred and even may lead to failure of endodontic therapy. To prevent these kinds of accidents, various instrumentation techniques and materials have been introduced. Recently some nickel titanium (NiTi) files are introduced and it is reported that These NiTi files created rounder preparations with less transportation than conventional instruments in curved canals. This study compared the change of the canal curvature and procedural accidents after instrumentation produced by stainless steel K-flexo file, and NiTi rotary files (Profile 29 and Quantec 2000). Thirty narrow and curved canals (25-45 degree) of extracted human molars were randomly divided into three groups. In group 1, canals were instrumented using a step-back and watch-winding/pull motion with K-flexo files. In group 2, canals were prepared with Profile 29. Group 3, canals were prepared with Quantec 2000 files. Before and after preparation of canals, periapical radiographs were taken and scanned. The change of canal curvature were measured using Photoshop 4.0 program and the incidence of procedural accidents were also evaluated. The results were as follows: 1. All group showed some loss of canal curvature after instrumentation. 2. Average loss of canal curvature was $6.70{\pm}5.31$ degree for group 1, $3.80{\pm}2.57$ degree for group 2, and $5.40{\pm}4.83$ degree for group 3. All group There was significant change in curvature between before and after instrumentation (p<0.05). But there was no statistical difference amoung 3 groups. 3. In group I, there were no procedural accidents, such as ledging, perforation, or instrument fracture. In group 2, two cases of ledge and one case of instrument fracture were produced Goup 3, each one case of ledge, perforation and instrument fracture were occurred. Whthin the limits of above results, It seems that NiTi rotary instrumentation is not All Mighty and if we use uncarefully, it is more dangerous to produce some procedural accidents than conventional hand files. But more studies should be taken to evaluate the exact effects of NiTi rotary instrumentations.