• 한국건설관리학회논문집
• /
• 제23권6호
• /
• pp.21-29
• /
• 2022

건설 프로젝트의 성공적인 수행을 위해 공정 생산성 예측이 필수적으로 요구된다. 특히, 시공 단계 이전에 수행되는 계획의 정확도 및 실효성은 시공 단계의 성과에 큰 영향을 미친다. 기존의 생산성 예측은 표준품셈과 같은 기존 문헌 참고를 통해 수행된다. 그러나 이러한 방법은 변화하는 조건을 즉각적으로 반영하는 것과 공사 수행에 필요한 최적의 장비 조합을 도출하는 것이 어렵다. 본 연구에서는 이산 이벤트 시뮬레이션 기술을 이용하여 장비 조합에 따른 생산성 데이터베이스 구축 방법을 제시하였다. 제시된 방법을 통해 표준품셈 기반 공정 계획 수립을 하는 관리자에게 굴삭기, 로더, 덤프트럭 등으로 수행되는 작업에 대한 최적 시공 계획 수립을 할 수 있을 것이라 예상된다.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.472-478
• /
• 2009

The scopes of the supply chain management in construction projects has expanded from the field management focusing on field storage, transportation, and lifting to the whole supply chain from the materials to field. The expansion of the supply chain management can raise the possibilities of leaner production, which enables shortened lead time of the difficult-to-operate materials, and prevents the work interference or delay. However, the expanded management range requires more information and management than an existing management style currently used for factory production of iron frame, curtain wall, PC, etc. In addition, there are limitations that expand the existing management style into the new supply chain management in construction projects and therefore it is required to automate the existing management style in order to extend the management range. The objective of this study is to propose the process and equipment that can manage the supply chain of the materials which range from the factory production to the field storage based on RFID/USN techniques, introducing small-sized transportation equipment(intelligent pallet), the vehicle tool kit(intelligent trailer), and in-and-out management equipment(Gate Sensor) as a prototype to effectively develop the appliances for operating the proposed process, and present the application possibility of the appliances. The full paper will present then the test results that the proposed appliances for the supply chain management automatically transmit and receive the generated information between the appliances or the appliance and sever under various wireless network circumstances such as zigbee, wibro, Wi-Fi, and CDMA.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.10-21
• /
• 2021

Recently, the demand for atypical structures with functions and sculptural beauty is increasing in the construction industry. Existing mold-based structure production methods have many advantages, but building complex atypical structures represents limitations due to the cost and technical characteristics. Production methods using molding are suitable for mass production systems, but production cost, construction period, construction cost, and environmental pollution can occur in small quantity batch production. The recent trend in the construction industry calls for new construction methods of customized small quantity batch production methods that can produce various types of sophisticated structures. In addition to the economic effects of developing related technologies of 3D Concrete Printers (3DCP), it can enhance national image through the image of future technology, the international status of the construction civil engineering industry, self-reliance, and technology export. Until now, 3DCP technology has been carried out in producing and utilizing residential houses, structures, etc., on land or manufacturing on land and installing them underwater. The final purpose of this research project is to produce marine structures by directly printing various marine structures underwater with 3DCP equipment. Compared to current underwater structure construction techniques, constructing structures directly underwater using 3DCP equipment has the following advantages: 1) cost reduction effects: 2) reduction of construct time, 3) ease of manufacturing amorphous underwater structures, 4) disaster prevention effects. The core element technology of the 3DCP equipment is to extrude the transferred composite materials at a constant quantitative speed and control the printing flow of the materials smoothly while printing the output. In this study, the extruding module of the 3DCP equipment operates underwater while developing an extruding module that can control the printing flow of the material while extruding it at a constant quantitative speed and minimizing the external force that can occur during underwater printing. The research on the development of 3DCP equipment for printing concrete structures underwater and the preliminary experiment of printing concrete structures using high viscosity low-flow concrete composite materials is explained.

• 대한안전경영과학회지
• /
• 제6권2호
• /
• pp.231-239
• /
• 2004

To keep an enterprise's competitiveness on the condition of the automatic manufacturing system such as FA, FMS and CIM, all the maintenance problems should be considered seriously in not only in production and maintenance but also in related industrial productivity. This paper presents the study of equipment reliability improvement for rotary-machine vibration analysis. Based on these analyses, the maintenance management information system, and the machinery condition diagnosis technique are studied by using of the real-time diagnostic. Therefore, it is expected to improve the efficiency of business processes in the production and safety when we use this system.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.76-81
• /
• 2012

In-process evaluation equipment for the prominent discrete tone (PDT) emitted by small motors or actuators such as HDD(Hard Disk Driver), ODD(Optical Disk Driver) or linear motors has been developed and estimated on the basis of Prominence Ratio (PR) method in ECMA 74. Correlation of the evaluation equipment was performed in comparison with the method by ECMA 74 in anechoic chamber. Coherent function between two systems was applied in order to compensate traceability of ECMA 74 in anechoic chamber. Usability of the developed system with estimated Gage R&R shall be approved with real samples in the mass production line.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.59-60
• /
• 2006

It is bringing out the importance of automated LCD testing equipment that satisfy a definite quality, confidence and testing speed, as LCD enterprises are recently expanding the production and facility investment in proportion to the sudden increase of LCD demand. So far, LCD inspection is however conducted by manual, or the confidence of existing testing equipment falls short of LCD enterprises's standard. It is therefore important to develop the testing equipment that determines the quality of product for production of an excellent LCD.

• 한국유기농업학회지
• /
• 제21권3호
• /
• pp.305-319
• /
• 2013

In this study, it is intended that utilize the LCA (Life Cycle Assessment) method, to evaluate the environmental impact of wood pellet manufacturing facility. As mentioned above, wood pellet manufacturing facility of 20 has produced wood pellets as a raw material sawdust and wood in our country. In this study, in order to feature manufacturing process of wood pellets that resemble almost necessary to analyze evenly size and characteristics of various equipment whether these reasonable, the characteristics of the equipment may be different, the production of 20 places I surveyed the facility one central timber distribution center one large scale most of the equipment.

• Journal of Multimedia Information System
• /
• 제8권4호
• /
• pp.285-294
• /
• 2021

The development process of domestic CG (Computer Graphics) needs to be studied by classifying the technical part and the design part. This paper analyzes how early domestic broadcast equipment evolved and focused on what went through the development process. Domestic broadcasting companies have introduced and used overseas equipment and have begun to develop their own technology. The development process of the early domestic production technology of broadcasting stations was classified into Character Generator, On-line Real-Time Graphic and Sport Coder. It was found that the orientation of broadcasting technology was conclusively focused on visualization, with socio-cultural factors acting along with the evolution of hardware and software. This research is meaningful in reorganizing the history of the development process of domestic CG technology in the early days through previous research (primary verification), newspaper articles and news coverage (secondary verification). This paper looks at what is missing by regaining the past of CG, and argues that with the advent of new technologies today, we must develop through appropriate division of roles and collaboration between engineers and designers.

• 한국정보시스템학회지:정보시스템연구
• /
• 제26권2호
• /
• pp.105-121
• /
• 2017

Purpose It is a major goal to improve the product yields during production operations in the manufacturing industry. Therefore, factory is trying to keep the good quality materials and proper production resources, also find the proper condition of facilities and manufacturing environment for yields improvement. Design/methodology/approach We propose the hybrid framework to analyze to dataset extracted from MES. Those data is about the alarm information generated from equipment, both measurement and equipment process value from production and cycle/pitch time measured from production data these covered products during production. We adapt a data warehousing techniques for organizing dataset, a logistic regression for finding out the significant factors, and a association analysis for drawing the rules which affect the product yields. And then we validate the framework by applying the real data generated from the discrete process in secondary cell battery manufacturing. Findings This paper deals with challenges to apply the full potential of modeling and simulation within CPPS(Cyber-Physical Production System) and Smart Factory implementation. The framework is being applied in one of the most advanced and complex industrial sectors like semiconductor, display, and automotive industry.

• International Journal of CAD/CAM
• /
• 제6권1호
• /
• pp.3-8
• /
• 2006

The application of three-dimensional (3-D) CAD has been popularized for design and production and digital manufacturing has been spreading in many industrial fields. By simulation of the production process using 3-D digital models, which are the core of CIM (Computer Integrated Manufacturing) system, the efficiency and safety of production are improved at each stage of work, and optimization of manufacturing can be achieved. This paper firstly describes the concept of "simulation based production" in shipbuilding and also digital manufacturing; the 3-D CAD system is indispensable for effective simulation because ship structure is three dimensionally complex. By simulation, "computer optimized manufacturing" can be possible. The most effective fields of simulation in shipbuilding are in jobs where many parties have to cooperate, while existing two-dimensional drawings are hardly observed the whole structures due to interference between structures or equipment of complex shape. In this paper some examples of the successful application in IHIMU (IHI Marine United Inc.) are shown: assembly of a pipe unit, erection of a complex hull block, carriage of equipment, installation of a propeller, and access in an engine room.