• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.30 no.2
• /
• pp.71-77
• /
• 2016

The dielectric barrier discharge (DBD) has low efficiency due to about 70% input power is consumed as thermal energy in the discharge space. However, because of the usage of DBD ozone generator is easier than other methods. The DBD ozone generator has been widely applied for high concentration ozone generation in the industrial application. But, the low-capacity compact DBD ozone generator is not applied so far. Therefore, the DBD ozone generator is necessary to improve ozone production efficiency and reduce the capacity. In this paper, the stainless steel pipe inner electrode was designed with hall type and screw type to improve the ozone production yield. The manufactured two inner electrodes were experimented with normal type for comparison of the discharge characteristics and the ozone generating characteristics. As the experimental results, the discharge current effective value of designed inner electrodes with hall type and screw type are higher than the normal type, due to unequal electric field is formed at the boundary. However, the difference of designed and original electrodes is less than 0.1mA that has no effect on the discharge characteristic. On the other hand, the screw type inner electrode increased higher than original model about 7 times when the flow rate of the oxygen source gas was increased from $0.6{\ell}/min$ to $1.0{\ell}/min$ The reason was assumed by the flow rate of the raw gas through the inner electrode was became fast that has a cooling effect. The designed hall type and screw type inner electrodes have shown good performances in ozone generation and ozone production that better than normal type in the same electrode surface area.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.2
• /
• pp.118-136
• /
• 2010

Photochemical characteristics of ozone ($O_3$) and its precursors such as $O_3$ budget and $O_3-NO_x$-VOC sensitivity were analyzed in different physico-chemical properties of air masses around the Mexico City Metropolitan Area (MCMA) using aircraft observations during March 2006. The physico-chemical properties of air masses were categorized into 5 groups: boundary layer (BL), biomass burning (BB), free tropospheric continent (FTCO) and marine (FTMA), and Tula industrial complex (TIC). Results from the $O_3$ budget analysis indicated that $O_3$ production for BL, FTCO, and FTMA (for BB and TIC) was mainly controlled by a photochemical production pathway, a reaction of NO with $HO_2$ (with $RO_2$), while the main pathway of photochemical $O_3$ destruction for BL, FTCO, and FTMA (for BB and TIC) was a reaction of $HO_2$ with $O_3$ (of $H_2$ with $O^1$(D)). In addition, most of air mass categories (especially FTCO) were estimated to be $NO_x$-sensitive for $O_3$ production with lower $NO_y$, higher ratios of the other indicator species (e.g., $O_3/(NO_y-NO_x$), $H_2O_2/HNO_3$, etc.), and the lower removal rate of radicals ($\leq$0.5) by the reaction of OH with $NO_2$ than those of the VOC-sensitive condition.

• Structural Engineering and Mechanics
• /
• v.76 no.1
• /
• pp.141-151
• /
• 2020

This manuscript tends to investigate influences of nanoscale and surface energy on a static bending and free vibration of piezoelectric perforated nanobeam structural element, for the first time. Nonlocal differential elasticity theory of Eringen is manipulated to depict the long-range atoms interactions, by imposing length scale parameter. Surface energy dominated in nanoscale structure, is included in the proposed model by using Gurtin-Murdoch model. The coupling effect between nonlocal elasticity and surface energy is included in the proposed model. Constitutive and governing equations of nonlocal-surface perforated Euler-Bernoulli nanobeam are derived by Hamilton's principle. The distribution of electric potential for the piezoelectric nanobeam model is assumed to vary as a combination of a cosine and linear variation, which satisfies the Maxwell's equation. The proposed model is solved numerically by using the finite-element method (FEM). The present model is validated by comparing the obtained results with previously published works. The detailed parametric study is presented to examine effects of the number of holes, perforation size, nonlocal parameter, surface energy, boundary conditions, and external electric voltage on the electro-mechanical behaviors of piezoelectric perforated nanobeams. It is found that the effect of surface stresses becomes more significant as the thickness decreases in the range of nanometers. The effect of number of holes becomes significant in the region 0.2 ≤ α ≤ 0.8. The current model can be used in design of perforated nano-electro-mechanical systems (PNEMS).

• Speech Sciences
• /
• v.11 no.3
• /
• pp.111-128
• /
• 2004

In English, a focused word with new information receives a pitch accent. This paper examines how English native speakers and Korean speakers produce and perceive focus in English yes-no questions. The production experiments show that native speakers realize an appropriate intonation of yes-no questions, in which a focused word has a low pitch accent followed by a high phrasal accent and a high boundary tone. However, Korean speakers usually give a high tone to a focused word. In a like manner, the perception experiments show that English native speakers judge a word with a low tone to be focused, while Korean speakers have difficulty in comprehending a focused word realized as a low tone. And it is found that Korean speakers tend to perceive low tones on sentence initial and final focused words better than those on sentence medial focused words, and they often perceive a word with a relatively high fundamental frequency or a sharp rise of fundamental frequency as a focused word. This paper shows that Korean speakers have trouble to produce and perceive an appropriate tonal pattern of a focused yes-no question, and that can cause confusion in a conversation with native speakers.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.4
• /
• pp.383-389
• /
• 2011

The negative fishery factors from an environmental perspective are greenhouse gas emissions due to high fossil fuel use, destruction of underwater ecosystems by bottom trawls, a reduction in resources by fishing, and damage to ecosystem diversity. In particular, the greenhouse gas emissions from fisheries is an important issue based on the Cancun meeting in Mexico in 1992 and the Kyoto protocol in 2005. However, no investigations on the GHG emissions from Korean fisheries have been conducted. Therefore, a quantitative analysis of GHG emissions from the Korean fishery industry is needed as a first step to identify a method to reduce GHG emissions from fisheries. The purpose of this study was to investigate the degree of GHG emitted from fisheries. Here, we calculated the GHG emissions from four main Korean fisheries(i.e., large trawls, large purse seines, Danish seines, and bottom pair trawls) using the life cycle assessment(LCA) method. The system boundary and input parameters for each process level were defined for LCA analysis. The fuel use coefficient of each fishery was also calculated. The GHG emissions from edible seafood were calculated considering different consuming areas. The results will be helpful to understand GHG emissions from Korean fisheries.

• The Journal of Korean Society of Virology
• /
• v.27 no.1
• /
• pp.9-17
• /
• 1997

Hepatitis C virus (HCV) E2 protein is known to be one of putative envelope proteins. To develop a sensitive detection method for HCV infected tissues and cells, monoclonal antibodys (MAbs) to the E2 protein of HCV were prepared from mice immunized with recombinant baculovirus-expressing E2 protein (Bac-E2). Several hybridoma clones secreting various levels of MAb were isolated and isotypes of these MAb were determined. One clone (L.2.3.3) was used for ascites production and the E2-MAb was purified and characterized. The L.2.3.3 reacted well with both Bac-E2 and E. coli expressed glutathione-S-transferase-E2 (GST-E2) fusion proteins. Using HCV patient sera, E2 envelope protein was found to be localized in the cell membrane boundary both in CHO cells and insect cells which express HCV E2 protein. Similar result was obtained when same cells were treated with the MAb L.2.3.3. These results demonstrated that Bac-E2 protein is capable of eliciting high titer antibody production in mice.

• Journal of the Korean Regional Science Association
• /
• v.11 no.1
• /
• pp.61-78
• /
• 1995

This study begins with a question of what spatial impact international trade policy would have following the Uruguay Round, particularly focusing on agricultural trade liberalization in Korea. Based upon the neoclassical urban economic model, it first identifies the channel in which agricultural market opening can ultimately affect both rural and urban are as; $\circled1$ Free trade will depress domestic price of agricultural products, $\circled2$ which will in turn depreciate agricultural land price. $\circled3$ The decrease in marginal supply cost for urban land will then facilitate urban sprawl, provided that the government relaxes restrictions on urban-rural land conversion. Theoretical analysis is further refined by empirical considerations that distinguish agricultural land value solely for production purpose from that for future urban, uses, and that distinguish the urbanization effect caused by the fall in the supply cost of urban land from that caused by the existing high level of demand. Utilizing the estimate of bid-price for paddy field derived from the revenue-cost relationship of rice production, simulation results show that the urban-rural boundary under trade liberalization can expand outward up to 70-85km radius in the Seoul metropolitan area, suggesting the emergency of a metropolis or even a megalopolis which extends from Seoul to the central part of the country. Since the geographic extent of urbanization effect can vary depending upon the urban spatial structure, however, it is recommended that the redevelopment option in the built - up area should always be tied up with the issue of whether to deregulate rural-to-urban land conversion.

• Steel and Composite Structures
• /
• v.41 no.6
• /
• pp.787-803
• /
• 2021

The size-dependent nonlinear thermomechanical vibration analysis of pre- and post-buckled tapered two-directional functionally graded (2D-FG) microbeams is presented in this study. In the context of the modified couple stress theory, the formulations are derived based on the parabolic shear deformation beam theory and von Karman nonlinear strains. Different thermomechanical material properties are assumed to be temperature-dependent and smoothly vary in both length and thickness directions using the power law and the physical neutral axis concept is employed. The nonlinear governing equations are derived using the Hamilton principle and the resulting variable coefficient equations of motion are solved using the differential quadrature method (DQM) and iterative Newton's method for clamped-clamped and simply supported boundary conditions. Comparison studies are presented to validate the derived model and solution procedure. The impacts of induced thermal moments, temperature power index, two gradient indices, nonuniform cross-section, and microstructure length scale parameter on the frequency-temperature configurations are explored for both clamped and simply supported microbeams.

• English & American cultural studies
• /
• v.14 no.1
• /
• pp.219-239
• /
• 2014

Arjun Appadurai contends that "the new global cultural economy has to be seen as a complex, overlapping, disjunctive order that cannot any longer be understood in terms of existing center-periphery models" (32); though discerning and perhaps becoming more and more apt, Appadurai's observation of the breakdown of the "center-periphery" binary appears as mere "academic jargon" in the lives of new immigrants, tackling the murky waters of identity politics in the transcultural technoscape of modern America in Kunzru's Transmission. Kunzru's antihero is Arjun Mehta, a software technician, who comes to America with high hopes of realizing the "American Dream." To a certain extent, Arjun himself is culpable of resurrecting the "center" as he prioritizes America and its values over all else. Despite his best efforts, Arjun cannot prevail in the perilous politics of exclusion/inclusion, and is relegated into a "high-tech coolie," exploited for his technological savvy. Even as the "center-periphery" binary stays intact in the production of an (Asian) American identity, it becomes undone in the hands of this "would-be" American; ultimately denied inclusion into America, Arjun unleashes a destructive virus that has major global consequences. In a sense, the boundary that separates the center and the periphery comes down as both collectively become victims to Arjun's retributive malfeasance. Arjun seems to rely on the "American" promise that old allegiances (to a national identity) are now defunct and new ones can be easily forged; as Kunzru's Transmission demonstrates with the tragic story of Arjun, the complex politics of identity production in America does not necessarily deliver on this promise. This essay hence aims to examine the politics of (national) belonging in the age of transnationalism.

• Clean Technology
• /
• v.15 no.3
• /
• pp.224-230
• /
• 2009

Life Cycle Assessment (LCA) has been studied on the reuse of glass bottles. The system boundary in this study encompassed from gate to gate such as production and transportation. A 360 mL volume of a glass bottle was selected as the functional unit. The environmental impact assessments was studied on 6 categories including abiotic resource depletion, acidification, eutrophication, global warming, ozone depletion, and photochemical oxidant creation. The results showed that the most significant impact categories were abiotic resource depletion (48.63%) and global warming (46.27%), and the rest categories revealed insignificant impacts. In the whole system, the chemicals used for the new bottle production revealed the major contribution to the environmental impacts (71.24%), followed by the use of electricity (16.74%) and transportation (11.8%). In addition, the environmental impact of sodium silicate to be put into the stage of the new bottle production was found to be 45.68%, causing severe influence on abiotic resource depletion and global warming.