• International Commerce and Information Review
• /
• v.18 no.4
• /
• pp.81-112
• /
• 2016

About 60 percent of cosmetic products sold in the dominant Taobao internet shopping mall proved recently to be counterfeit products made in China. This paper is to investigate the anti-counterfeiting strategies to clean up fake goods for Korean cosmetics which have been exported to China. Using the scienter rule the paper classified the forgery action for Korean cosmetics into four broad groups - counterfeit, piracy, illegally distributed product, and brand prior register. This paper suggested interior company's anti-counterfeiting strategies for each group, focusing on the construction for an integrated anti-counterfeiting system including consumer's rationality through the government cooperation between Korea and China.

• Journal of Food Hygiene and Safety
• /
• v.33 no.1
• /
• pp.12-22
• /
• 2018

The US government has enacted the Food Safety Modernization Act (FSMA) in 2011, which is being phased in and planned. The final Rules of Produce Safety focus on biological hazards related to agricultural production, harvesting, packaging and storage, which are being phased in since 2017 depending on farm scale. As a result of comparison with the Korean-GAP (Good Agricultural Practices) standards, it is difficult to compare the two standards to be compared with each other by 1:1. However, many of the Korean-GAP standards are similar to FSMA Produce Safety rules. However, the Korean-GAP standards can be judged differently according to the evaluator as a comprehensive standard, so the details of the standards need to be reinforced. In terms of the provisions, the Korean-GAP standards are the most appropriate for the safety of workers (FSMA Subpart D), followed by livestock and wild animals (FSMA Subpart I), buildings, equipment and tools (FSMA Subpart L) and harvesting activities (FSMA Sub-part K). However, there are some weaknesses in the field of agricultural water management (FSMA Subpart E) and farm manager's qualifications and training (FSMA Subpart C), and the response to the biological soil amendments of animal origin and human waste (FSMA Subpart F) is weak. The FSMA regulation is not a certification standard, but it is expected that the marbling effect, which is the standard laid down by the United States leading the world food safety standards, is expected to be considerable. Therefore, we hope that the review of the Korean-GAP standards will help improve the quality of agricultural products and expand our exports, since the standard for responding to microbiological safety emphasized in the FSMA regulations is the Korean-GAP standard.

• Journal of Information Display
• /
• v.12 no.3
• /
• pp.145-152
• /
• 2011

Since the discovery of fullerenes as a class of nanostructure compounds, many potential applications have been suggested for their unusual structures and properties. The isolated pentagon rule (IPR) states that all pentagonal carbon rings are isolated in the most stable fullerene. Fullerenes $C_n$ are a class of spherical carbon allotrope group with unique properties. Electron transfer between fullerenes and other molecules is thought to involve the transfer of electrons between the molecules surrounding the fullerene cage. One class of electron transfer molecules is the methanofullerene derivatives ([6,6]-phenyl $C_{61}$-butyric acid methyl ester (PCBM), 4-(2-ethylhexyloxy)-[6,6]-phenyl $C_{61}$-butyric acid methyl ester (p-EHO-PCBM), and 4-(2-ethylhexyloxy)-[6,6]-phenyl $C_{61}$-butyric acid (p-EHO-PCBA), 10-12). It has been determined that $C_{60}$ does not obey IPR. Supramolecular complexes 1-9 and 10-12 are shown to possess a previously unreported host.guest interaction for electron transfer processes. The unsaturated, cis-geometry, thiocrown ethers, (1-9) (described as [X-UT-Y], where X and Y indicate the numbers of carbon and sulfur atoms, respectively), are a group of crown ethers that display interesting physiochemical properties in the light of their conformational restriction compared with a corresponding saturated system, as well as the sizes of their cavities. Topological indices have been successfully used to construct mathematical methods that relate structural data to various chemical and physical properties. To establish a good relationship between the structures of 1-9 with 10-12, a new index is introduced, ${\mu}_{cs}$. This index is the ratio of the sum of the number of carbon atoms ($n_c$) and the number of sulfur atoms ($n_s$) to the product of these two numbers for 1-9. In this study, the relationships between this index and oxidation potential ($^{ox}E_1$) of 1-9, as well as the first to third free energies of electron transfer (${\Delta}G_{et(n)}$, for n = 1-3, which is given by the Rehm-Weller equation) between 1-9 and PCBM, p-EHO-PCBM, and p-EHO-PCBA (10-12) as [X-UT-Y]@R(where R is the adduct PCBM, p-EHO-PCBM, and p-EHO-PCBA group) (13-15) supramolecular complexes are presented and investigated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.7
• /
• pp.1657-1670
• /
• 2013

The increase in the number of music files in smart phone and MP3 player makes it difficult to find the music files which people want. So, Query-by-Singing/Humming (QbSH) systems have been developed to retrieve music from a user's humming or singing without having to know detailed information about the title or singer of song. Most previous researches on QbSH have been conducted using musical instrument digital interface (MIDI) files as reference songs. However, the production of MIDI files is a time-consuming process. In addition, more and more music files are newly published with the development of music market. Consequently, the method of using the more common MPEG-1 audio layer 3 (MP3) files for reference songs is considered as an alternative. However, there is little previous research on QbSH with MP3 files because an MP3 file has a different waveform due to background music and multiple (polyphonic) melodies compared to the humming/singing query. To overcome these problems, we propose a new QbSH method using MP3 files on mobile device. This research is novel in four ways. First, this is the first research on QbSH using MP3 files as reference songs. Second, the start and end positions on the MP3 file to be matched are estimated by using multi-layered perceptron (MLP) prior to performing the matching with humming/singing query file. Third, for more accurate results, four MLPs are used, which produce the start and end positions for dynamic time warping (DTW) matching algorithm, and those for chroma-based DTW algorithm, respectively. Fourth, two matching scores by the DTW and chroma-based DTW algorithms are combined by using PRODUCT rule, through which a higher matching accuracy is obtained. Experimental results with AFA MP3 database show that the accuracy (Top 1 accuracy of 98%, with an MRR of 0.989) of the proposed method is much higher than that of other methods. We also showed the effectiveness of the proposed system on consumer mobile device.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.6
• /
• pp.723-731
• /
• 2020

The design of offshore plants should reflect the various requirements of the owner and the classification society. For a topside module mounted on an of shore structure, the design process is very demanding because of the large spatial constraints and the many requirements related to marine environmental conditions and safety such as the movement of the structure. In this study, the load acting on the hydraulic power unit, which is one of the main equipment in the topside module, was calculated according to the DNVGL rule; the structural safety was evaluated according to each load condition and the structural reliability of the developed product was improved. For structural analysis, MSC software was used, and structural analysis was performed under five load conditions to review structural safety for various movements. The results show that the maximum stress occurred during pitching toward the stern (Load Case 5). The stress level was approximately 85 % of the allowable stress, and the maximum deformation was approximately 5 % of the allowable value. The structural safety was confirmed, and no intermember interference occurred.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.999-1004
• /
• 2005

An algorithm for a hybrid controller consists of a sliding mode control part and a fuzzy logic part which ar purposely for nonlinear systems. The sliding mode part of the solution is based on "eigenvalue/vector"-type controller is used as the backstepping approach for tracking errors. The fuzzy logic part is a Mamdani fuzzy model. This is designed by applying sliding mode control (SMC) method to the dynamic model. The main objective is to keep the update dynamics in a stable region by used SMC. After that the plant behavior is presented to train procedure of adaptive neuro-fuzzy inference systems (ANFIS). ANFIS architecture is determined and the relevant formulation for the approach is given. Using the error (e) and rate of error (de), occur due to the difference between the desired output value (yd) and the actual output value (y) of the system. A dynamic adaptation law is proposed and proved the particularly chosen form of the adaptation strategy. Subsequently VSC creates a sliding mode in the plant behavior while the parameters of the controller are also in a sliding mode (stable trainer). This study considers the ANFIS structure with first order Sugeno model containing nine rules. Bell shaped membership functions with product inference rule are used at the fuzzification level. Finally the Mamdani fuzzy logic which is depends on adaptive neuro-fuzzy inference systems structure designed. At the transferable stage from ANFIS to Mamdani fuzzy model is adjusted for the membership function of the input value (e, de) and the actual output value (y) of the system could be changed to trapezoidal and triangular functions through tuning the parameters of the membership functions and rules base. These help adjust the contributions of both fuzzy control and variable structure control to the entire control value. The application example, control of a mass-damper system is considered. The simulation has been done using MATLAB. Three cases of the controller will be considered: for backstepping sliding-mode controller, for hybrid controller, and for adaptive backstepping sliding-mode controller. A numerical example is simulated to verify the performances of the proposed control strategy, and the simulation results show that the controller designed is more effective than the adaptive backstepping sliding mode controller.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.12
• /
• pp.1-9
• /
• 2009

A full adders is an important component in applications of digital signal processors and microprocessors. Thus it is imperative to improve the power dissipation and operating speed for designing a full adder. We propose a new adder with modified version of conventional static CMOS and pass transistor logic. The carry-out generation circuit of the proposed full adder is different from the conventional XOR-XNOR structure. The output Cout of module III is generated from input A, B and Cin directly without passing through module I as in conventional structure. Thus output Cout is faster by reducing operation step. The proposed module III uses the static CMOS logic style, which results full-swing operation and good driving capability. The proposed 1bit full adder has the advantages over the conventional static CMOS, CPL, TGA, TFA, HPSC, 14T, and TSAC logic. The delay time is improved by 4.3% comparing to the best value known. PDP(power delay product) is improved by 9.8% comparing to the best value. Simulation has been carried out using a $0.18{\mu}m$ CMOS design rule for simulation purposes. The physical design has been verified using HSPICE.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.4 no.4
• /
• pp.43-61
• /
• 1981

Interest in the Quality of working life is spreading rapidly and the phrase has entered the popular vocabulary. That this should be so is probably due in large measure to changes in the values of society, nowadays accelerated as never before by the concerns and demands of younger people. But however topical the concept has become, there is very little agreement on its definition. Rather, the term appears to have become a kind of depository for a variety of sometimes contradictory meanings attributed to it by different groups. A list of all the elements it if held to cover would include availability and security of employment, adaquate income, safe and pleasant physical working conditions, reasonable hours of work, equitable treatment and democracy in the workplace, the possibility of self-development, control over one's work, a sense of pride in craftsmanship or product, wider career choices, and flexibility in matters such as the time of starting work, the number of working days in the week, Job sharing and so on altogether an array that encompasses a variety of traditional aspirations and many new ones reflecting the entry into the post industrial era. The term "quality of working life" was introduced by professor Louis E. Davis and his colleagues in the late 1960s to call attention to the prevailing and needlessly poor quality of life at the workplace. In their usage it referred to the quality of the relationship between the worker and his working environment as a whole, and was intended to emphasize the human dimension so often forgotten among the technical and economic factors in job design. Treating workers as if they were elements or cogs in the production process is not only an affront to the dignity of human life, but is also a serious underestimation of the human capabilities needed to operate more advanced technologies. When tasks demand high levels of vigilence, technical problem-solving skills, self initiated behavior, and social and communication skills. it is imperative that our concepts of man be of requisite complexity. Our aim is not just to protect the worker's life and health but to give them an informal interest in their job and opportunity to express their views and exercise control over everything that affects their working life. Certainly, so far as his work is concerned, a man must feel better protected but he must also have a greater feeling of freedom and responsibility. Something parallel but wholly different if happening in Europe, industrial democracy. What has happened in Europe has been discrete, fixed, finalized, and legalized. Those developing centuries driving toward industrialization like R.O.K, shall have to bear in mind the human complexity in processing and designing the work and its environment. Increasing attention is needed to the contradiction between autocratic rule at the workplace and democratic rights in society.n society.

• Journal of the Society of Naval Architects of Korea
• /
• v.28 no.1
• /
• pp.150-168
• /
• 1991

A practical procedure for the ultimate compressive strength-based safety and reliability assessment of the double skin upper deck structure is described. The external compressive stress acting on the upper deck structure which is due to the still water and wave-induced sagging moment is approximately estimated by using the existing rule of classification society. The ultimate compressive stress of double skin structure under the action of sagging moment is analyzed by using idealized structural unit method. Here an idealized plate element subjected to uniaxial load is formulated by idealizing the nonlinear behaviour of the actual element taking account of the initial imperfections in the form of initial deflection and welding residual stress. The interaction effect between the local and global failure in the structure is also taken into consideration. The accuracy of the present method is verified comparing with the present solution and the existing numerical and experimental results for unit member and welded box columns. The safety of the structure is evaluated using the concept of conventional central safety factor and the reliability assessment is made by using Cornel's MVFOSM method. The present procedure is then applied to upper deck structure of double skin product oil carrier. The influence of the initial imperfections and the yield stress of the material on the safety and reliability of the structure is investigated.

• Nuclear Engineering and Technology
• /
• v.56 no.6
• /
• pp.2174-2181
• /
• 2024

In this work, Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics were prepared via in-situ synthesis process, which is a potential novel nuclear waste form for immobilizing the fission product ⁹⁰Sr and the trivalent actinide radionuclides in high-level waste (HLW). And the preparation technology, microstructure and chemical durability of Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics were systematically investigated. It was confirmed that the optimum microwave-sintering temperature (1050 ℃) and heat preservation time (1.5 h) is estimated by Archimedes method. Besides, the as-prepared samples that were consisted of strontium zirconium phosphate (SrZP) and monazite showed the remarkable densification, in which the two crystalline phases were intermixed well with each other. Meanwhile, the formation and evolution of microstructure was also consistent with the variational rule of Sr_0.5Zr₂(PO₄)₃/SmPO₄, indicating that there was not mutual reaction during the in-situ synthesis process. The PCT and MCC-1 experimental results demonstrated that the elemental normalized leaching rates of tested samples are all at a low level (LR_Sr ~10^-4 g·m^-2·d^-1, LR_Zr ~10^-8-10^-6 g·m^-2·d^-1, LR_Sm ~10^-7-10^-5 g·m^-2·d^-1 and LR_P ~10^-4 g·m^-2·d^-1). It is indicated that Sr_0.5Zr₂(PO₄)₃-SmPO₄ dual-phase ceramics possesses excellent chemical durability for HLW disposal.