• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.3
• /
• pp.22-29
• /
• 2015

In this study, we tested to develop and apply structural insulation performance improvement concrete to field, which had compressive strength in 24 MPa and thermal conductivity twice as much as normal concrete. After experiment about slump and air contents, combination product of Plain and calcined diatomite powder showed reduction of slump and air contents and combination product with micro foam cell admixture, we cannot find result of slump and air contents reduction. Unit weight of combination product with insulation performance improvement materials decreased more than that of Plain. In the test of compressive strength, compressive strength of insulation performance improvement concrete decreased more than that of Plain but was content with 24 MPa. thermal conductivity of insulation performance improvement concrete tended to decrease. Freezing and thawing resistance of insulation performance improvement concrete was similar to that of Plain. In carbonation resistance test, combination product with calcined diatomite powder showed the result which was similar to that of Plain. In carbonation resistance test, combination product with micro foam cell admixture showed a increase compared to that of Plain and length variation of combination product generally increased.

• ETRI Journal
• /
• v.32 no.4
• /
• pp.588-595
• /
• 2010

This paper proposes encoding and decoding for nonlinear product codes and investigates the performance of nonlinear product codes. The proposed nonlinear product codes are constructed as N-dimensional product codes where the constituent codes are nonlinear binary codes derived from the linear codes over higher order alphabets, for example, Preparata or Kerdock codes. The performance and the complexity of the proposed construction are evaluated using the well-known nonlinear Nordstrom-Robinson code, which is presented in the generalized array code format with a low complexity trellis. The proposed construction shows the additional coding gain, reduced error floor, and lower implementation complexity. The (64, 24, 12) nonlinear binary product code has an effective gain of about 2.5 dB and 1 dB gain at a BER of $10^{-6}$ when compared to the (64, 15, 16) linear product code and the (64, 24, 10) linear product code, respectively. The (256, 64, 36) nonlinear binary product code composed of two Nordstrom-Robinson codes has an effective gain of about 0.7 dB at a BER of $10^{-5}$ when compared to the (256, 64, 25) linear product code composed of two (16, 8, 5) quasi-cyclic codes.

• Journal of Korea Technology Innovation Society
• /
• v.1 no.2
• /
• pp.192-207
• /
• 1998

This paper focuses on the relationship between innovation and export performance of technology-based firms in Korea. This study analyses the relationship between innovative activity and firm's performances using a sample of 760 technology-based firms in Korea. As for the firm's performance indicators, export is employed. The empirical results support that innovation has a positive effect on firm's export performance. However, for small and medium firms, the relationship between innovative activity and export performance is an U-shape quadratic form, which shows that small firms takes a minimum innovative expenditure in order to access the abroad market. Also, with product differentiation, innovative firms tends to devot more to domestic market than to abroad market. Therefore, it can be concluded that innovative activity builds market power and accelerates export performance. And product differentiation through advertising expenditure make innovative firms less exporting.

• IE interfaces
• /
• v.23 no.4
• /
• pp.275-285
• /
• 2010

In complex industrial world, many companies make every effort to analyze their competition capability through various performance evaluation tools to cope with rapidly changing business environment. Among evaluation tools the balanced scorecard (BSC), put forward by Kaplan and Norton in 1992, is a strategic performance management tool for measuring whether the smaller-scale operational activities of a company are aligned with its larger-scale objectives in terms of vision and strategy. The BSC tool offers a comparative advantage over others to evaluate the objective achievement of a company by linking its strategic objectives with operational KPI. In this paper, we introduce a case that the BSC performance evaluation system was implemented based on product data management and applied it to the business process. Specially, we shows a implementation procedure to derive discipline-specific topics and key performance metrics.

• Publications of The Korean Astronomical Society
• /
• v.24 no.1
• /
• pp.65-81
• /
• 2009

We present the performance test results of VLBI Correlation Subsystem (VCS) trial product which was being developed for 1 year from August 2007. It is a core component of Korea-Japan Joint VLBI Correlator (KJJVC). The aim for developing VCS trial product is to improve the performance of VCS main product to reduce the efforts and cost, and to solve the design problems by performing the preliminary test of the manufactured trial product. The function of VCS trial product is that it is able to process the 2 stations-1 baseline, 8 Gbps/station speed, 1.2 Gbps output speed with FX-type. VCS trial product consists of Read Data Control Board (RDC), Fourier Transform Board (FTB), and Correlation and Accumulation Board (CAB). Almost main functions are integrated in the FTB and CAB board. In order to confirm the performance of VCS trial product functions, the spectral analysis, delay compensation and correlation processing experiments were carried out by using simulation and real observation data. We found that the overflow problem of re-quantization after FFT processing was occurred in the delay compensation experiment. We confirmed that this problem was caused by valid bit-expression of the re-quantized data. To solve this problem, the novel method will be applied to VCS main product. The effectiveness of VCS trial product has been verified through the preliminary experimental results, but the overflow problem was occurred.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.1C
• /
• pp.20-25
• /
• 2006

In this paper, the performance of Tree-LDPC code is presented based on the min-sum algorithm with scaling and the asymptotic performance in the water fall region is shown by density evolution. We presents that the Tree-LDPC code show a significant performance gain by scaling with the optimal scaling factor which is obtained by density evolution methods. We also show that the performance of min-sum with scaling is as good as the performance of sum-product while the decoding complexity of min-sum algorithm is much lower than that of sum-product algorithm. The Tree-LDPC decoder is implemented on a FPGA chip with a small interleaver size.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.2
• /
• pp.137-146
• /
• 2011

The main objective of the present paper is to conduct a depth analysis of the structural relationship among cooperation of manufacturing corporations, their development of new products and performance in view of an empirical study. The findings of this study could be summed up as follows: First, from the analysis of relationship between cooperation of manufacturing corporations and development of new products, it was found out that there is a positive relationship among such factors of new product development as development process, organizational culture and substructure when cooperation among corporations becomes intensive. Second, the analysis of relationship between development of new products and financial outcomes showed that the factors of new product development like organizational culture and substructure do influence financial performance, while the development process don't. Third, in terms of relationship between factors of new product development and non-financial performance, it was analyzed that non-financial performance can be affected by such factors of new product development as development process, organizational culture and substructure.

• Journal of the Korea Management Engineers Society
• /
• v.23 no.4
• /
• pp.73-86
• /
• 2018

Most electric products produced during the manufacturing process are produced after design and mass production under a given control standard. In particular, the development phase should present the criteria for the production process by setting appropriate limits based on the performance being targeted. Even if the standard of performance is set considering the performance of the process, measuring the performance of the product after actual production results will cause nonconformities with the expected results. Among the performance of electrical products, Energy standards represented by energy consumption efficiency continue to be of importance, and are mandatory standards that correspond to national standards in most countries. Therefore, statistical quality control of these standards shall basically have a large number of test equipment for each product, ensure sufficient test time and continuous sampling of product samples. In the end, companies that produce and sell electric appliances are striving to control mass production at a great cost, but this is not acceptable. This study presents basic characteristics of the energy efficiency of electrical products and proposes and conducts a case study on statistical production control methods for performance variation across products under the standards about domestic and international regulations.

• East Asian Journal of Business Economics (EAJBE)
• /
• v.10 no.3
• /
• pp.17-26
• /
• 2022

Purpose - In this paper, we aim to analyze to what extent entrepreneurial orientation (EO) can help overcome Korean SMEs' liabilities of foreignness in overseas markets. In this end, we examined three sub-dimensions of EO (proactiveness, innovativeness, risk-taking) and examine their individual effects on NPD performance of exporting SMEs. Research design, data, and methodology - We collected survey questionnaires from Korean exporting SMEs that are certified with Inno-biz by the Korean Ministry of SMEs and Startups. The collected data was analyzed using SPSS 26 and AMOS to create an integrated model. Result - As a result of the analysis, we found that proactiveness and innovativeness dimension of EO have positive effect on new product performance of exporting SMEs. Furthermore, technological uncertainty has negative moderating effect between innovativeness and new product performance of SMEs. Conclusion - While proactive attitude and innovativeness of EO positively affected the performance of new products of SMEs, the tendency to take risks and pursue opportunities with bold behaviors did not have a positive effect on NPD performance in foreign nations.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.4
• /
• pp.79-95
• /
• 2017

This Study Investigates Whether R&D Capabilities and Market Orientation have Significant Effects on Product Innovation Performance in Order to Enhance Customer Value and Technology Innovation Competitiveness Considering the Characteristics of Rapidly Changing Semiconductor Industry. In other Words, as in the Research Model, the Purpose of this Study is to Investigate the Causal Relationship between the Independent Variable, R&D Capability and Market Orientation, on Product Innovation Performance, which is a Dependent Variable, through the Moderating Variable of Technological Innovation Orientation. For this Study, we Conducted a Questionnaire Survey on the Employees of Development Companies in the Semiconductor Industry and Finally Collected 118 Valid Questionnaires. The Collected Data was Analyzed by Multiple Regression Analysis with Demographic Characteristics as Control Variable and Hierarchical Regression Analysis was Conducted with the Moderating Effects of Technological Innovation Orientation. The Results Showed that the Higher the R&D Intensity and the External Network Capacity, the Higher the Product Innovation Performance. Also, the Product Innovation Performance was Higher than the Customer Orientation and Competitor Orientation Among the Market Orientation. In Addition, only R&D Capability Confirms that Technology Innovation Orientation is Moderated. The Result of this Study is to Improve Understanding of R&D Capability and Market Orientation in Creating of Product Innovation Performance of Semiconductor Companies and to offer Valuable Research Data in Empirically Supporting that Technological Innovation Orientation is an Important Moderating Factor in Creating Firm's Product Innovation Performance and Sustainable Competitive Advantage.