• Journal of Korean Society for Quality Management
• /
• v.42 no.1
• /
• pp.1-14
• /
• 2014

Purpose: In this paper, the minimal repair-replacement warranty policy is used to carry out a warranty cost analysis with warranty servicing times and failure times that are statistically correlated to bivariate distributions. Methods: Based on the developed approach by Park and Pham (2012a), we investigate the property of the Freund's bivariate exponential distribution and obtain the number of warranty services using the field data to conduct the warranty cost analysis. Results: Maximum likelihood estimates are presented to estimate the parameters and the warranty model is investigated using a Freund's bivariate exponential distribution. A numerical example is discussed to deal with the applicability of the developed approach in the paper. Conclusion: A novel approach of analyzing the warranty cost is proposed for a product in which failure times and warranty servicing times are used simultaneously to investigate the eligibility of a warranty claim.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.521-521
• /
• 2013

Collective Thomson scattering (CTS) system is being developed in KAERI based on high power gyrotrons. CTS is a promising diagnostic method to measure fast ion distributions and potentially the fusion product alpha particles in magnetically confined plasmas. By utilizing millimeter-waves from high power gyrotrons as a probing beam, spatially and temporally resolved 1-D ion velocity distributions can be obtained from the scattered radiation with less scattering geometrical constraints. The pulse modulation of gyrotrons enables to separate scattering signal from ECE background noises. The feasibility was assessed with the calculation of spectral density functions under the condition of KSTAR plasmas. Further CTS system requirements are also discussed.

• Journal of Food Hygiene and Safety
• /
• v.25 no.1
• /
• pp.10-15
• /
• 2010

This study was practiced to survey food-borne bacterial aspects of Escherichia coli and Bacilhus cereus etc. from 210 processed seasoned marine products in Garak fishery wholesale market in Seoul, 2009. Distributions of these bacterial isolates were 28 coliforms, 32 Bacillus spp., 71 Staphylococcus spp., 11 Listeria spp, and 10 Enterococcus spp. in 157 dried squids, 23 dried file fishes, and 20 dried pollacks etc. respectively. Results in 16 kinds of antibiotics susceptibility test by disc diffusion method, special multiple drugs resistance patterns were NOR + LVX + CIP + SAM + VA + S + TE + CF, SAM + C + VA, VA + S + TE, and VA + S in 9 E. coli strains, also, AMC + SAM + CF, SAM + CF, and VA + CF in 21 Bacillus cereus strains respectively. On the basis of the results above, many seasoned dried fishes had multiple drugs resistances, conclusively, we suggest limited guideline and special management on use of antibiotics in floating net cages of fishery farms.

• Honam Mathematical Journal
• /
• v.45 no.2
• /
• pp.248-268
• /
• 2023

As a generalization of conformal semi-invariant submersion, conformal slant submersion and conformal semi-slant submersion, in this paper we study conformal hemi-slant submersion from Kenmotsu manifold onto a Riemannian manifold. The necessary and sufficient conditions for the integrability and totally geodesicness of distributions are discussed. Moreover, we have obtained sufficient condition for a conformal hemi-slant submersion to be a homothetic map. The condition for a total manifold of the submersion to be twisted product is studied, followed by other decomposition theorems.

• Journal of the military operations research society of Korea
• /
• v.6 no.2
• /
• pp.129-149
• /
• 1980

In medical follow-up, equipment lifetesting, various military situations, and other fields, one often desires to calculate survival probability as a function of time, p(t). If the observer is able to record the time of occurrence of the event of interest (called a 'death'), then an empirical, non-parametric estimate may simply by obtained from the fraction of survivors after various elapsed times. The estimation is more complicated when the data are truncated, i.e., when the observer loses track of some individuals before death occurs. The product-limit method of Kaplan and Meier is one way of estimating p(t) when the mechanism causing truncation is independent of the mechanism causing death. This paper proposes jackknife estimators of logistic trans-formation and compares it to the product-limit method. A computer simulation is used to generate the times of death and truncation from a variety of assumed distributions.

• Journal of the Korean Ceramic Society
• /
• v.27 no.8
• /
• pp.965-970
• /
• 1990

A nitrogenation of coal ash in the presence of carbon was carried out to examine the effects of reaction temperature, reaction time and carbon composition on the formation of AlN, SiC and Si3N4. Decreasing the particle size increased the formation of AlN and its maximum composition in the product was obtaiend under 1450~150$0^{\circ}C$, 2 hours of reaction time and about 30% of carbon addition(on the basis of sample weight). Compositions of SiC and Si3N4 were distributed to the opposite so that SiC showed a higher composition compared with Si3N4 at a lower temperature, a shorter reaction time and a greater carbon addition.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2001.10a
• /
• pp.195-199
• /
• 2001

The flow turning process, an incremental forming process, is a cost-effective forming method for axi-symmetric intricate parts to net shape. However, the flow turning process shows a fairly complicated deformation, it is very difficult to obtain satisfactory results. Therefore extensive experimental and analytical research has not been carried out. In this study, an fundamental experiment was conducted to improve productivity with process parameters such as tool path, angle of roller holder($\alpha$), feed rate(v ) and comer radius of forming roller(Rr). These factors were selected as variables in the experiment because they were most likely expected to have an effect on spring back. The clearance was controlled in order to achieve the precision product which is comparable to deep drawing one. And also thickness and diameter distributions of a multistage cup obtained by flow turning process were observed and compared with those of a commercial product produced by conventional deep drawing.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3415-3421
• /
• 2022

This paper is aimed to find out the impact of the geometrical parameters, mainly the radius and the height of a cylinder, on the SGEMP response including the famous scaling law in the classical cylinder model using a homemade PIC code UNIPIC-3D. We computed the electric fields at the center and at the edge on the emission head face with different radii and heights under normal X-rays incidence. The results show that the electric field will increase with the radius but decrease with the height. We analyze the scaling law that links the electric field product and fluence product, and whereafter an irreconcilable contradiction raises when the radius is changeable, which limits the application range of the scaling law. Moreover, the field-height-radius relation is found and described by a combination of logarithmic and minus one-quarter numerical fitting law firstly. Particle and magnetic field distributions are used to explain all the behaviors of the fields reasonably. All the findings will assist the evaluation of SGEMP response in spacecraft protection.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.347-351
• /
• 2007

The influence of compaction pressure and sintering temperature on the hydraulic cylinder block fabricated by powder metallurgy is investigated in this study. The cylinder block is powder compacted under various compaction pressures and sintered under various sintering temperatures, and its density and dimensions are measured to reveal the relation of the process condition with the product quality. Moreover, finite element analyses of the density distributions are conducted under the same conditions with the experiments and the predicted results are compared with the measured ones.

• Journal of Korean Institute of Industrial Engineers
• /
• v.24 no.2
• /
• pp.175-183
• /
• 1998

When a product is designed, tolerances must be given to the product so that required functions are guaranteed and production costs are minimized. In this research, a model is suggested which allocates tolerances to components optimally according to the STA(Statistical Tolerance Allocation) method. Taking into account the concept that dimensional errors have characteristics of statistical distributions, this model presents the discrete pseudo-boolean approach for the tolerance optimization by minimizing the tolerance cost and the quality loss cost. In this approach, two methods are proposed for the reduction of the problem scale; 1) a method for converting the minimization model for casts into the maximization model for cost savings, and 2) procedures to reduce the number of constraints and variables.