• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.294-299
• /
• 2010

Thermal stability of exo-tetrahydrodicyclopentadiene (exo-THDCP) were investigated in a batch-type reactor perfectly coated with quartz. The 1 ml liquid product, which was a sufficiently small amount so as not to affect the reaction pressure, was sampled at 90 min intervals during the reaction and determined by gas chromatography-mass spectrometry (GC-MS) to measure thermal decomposition products of exo-THDCP and specify mechanism for additives (thermal stabilizer). Hydrogen donors (thermal stabilizer) such as 1,2,3,4-tetrahydroquinoline (THQ), benzyl alcohol (BnOH) increased thermal stability of exo-THDCP. These materials donated hydrogen to radical of exo-THDCP produced after initiation of exo-THDCP to decrease activity of primary products of exo-THDCP.

• Nuclear Engineering and Technology
• /
• v.45 no.7
• /
• pp.941-950
• /
• 2013

The Korean Nuclear-Hydrogen Technology Development (NHTD) Plan will be performing irradiation testing of coated particle fuel at HANARO to support the development of VHTR in Korea. This testing will be carried out to demonstrate and qualify TRISO-coated particle fuel for use in VHTR. The testing will be irradiated in an inert gas atmosphere without on-line temperature monitoring and control combined with on-line fission product monitoring of the sweep gas. The irradiation device contains two test rods, one has nine fuel compacts and the other five compacts and eight graphite specimens. Each compact contains about 260 TRISO-coated particles. The irradiation device is being loaded and irradiated into the OR5 hole of the in HANARO core from August 2013. The device will be operated for about 150 effective full-power days at a peak temperature of about $1030^{\circ}C$ in BOC (Beginning of Cycle) during irradiation testing. After a peak burn-up of about 4 atomic percentage and a peak fast neutron fluence of about $1.7{\times}10^{21}\;n/cm^2$, PIE (Post-Irradiation Examination) of the irradiated coated particle fuel will be performed at IMEF (Irradiated Material Examination Facility). This paper reviews the design of test rod and irradiation device for coated particle fuel, and discusses the technical results for irradiation testing at HANARO.

• Journal of the Korean Institute of Gas
• /
• v.8 no.1 s.22
• /
• pp.7-12
• /
• 2004

In the quality control of the aerosol skincare products containing powders, it is essential to guarantee that the contents in the bottle can be completely used without leakage or clogging of the nozzle. In this paper, the clogging caused by powder was investigated and the clogging can be effectively removed by emulsifying the contents containing powder with the LPG using a proper surfactant. And the spraying test shows that the contents in the bottle are completely propelled to outside by LPG when properly emulsified by POE(40) HCO.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.1
• /
• pp.92-97
• /
• 2016

The plasma has been used in various industrial fields of semiconductors, displays, transparent electrode and so on. Plasma diagnostics is critical to the uniform process and the product. We use the electron temperature of the various plasma parameters for the diagnosis of plasma. Generally, the range of the electron temperature which is used in a semiconductor process used the range of 1 eV to 10 eV. The difference of electron temperature of 0.5 eV has a influence in plasma process. The electron temperature can be measured by the electrical method and the optical method. Measurement of electron temperature for various gas flow rates was performed in DC-magnetron sputter and Inductively Coupled Plasma. The physical properties of the thin film were also determined by changing electron temperatures. The transmittance was measured using the integrating sphere, and wavelength range was measured at 300 ~ 1100 nm. We obtain the thin film of the mobility, resistivity and carrier concentration using the hall measurement system. As to the electron temperature increase, optical and electrical properties decrease. We determine it was influenced by the oxygen flow ratio and plasma.

• Journal of the Korean Institute of Gas
• /
• v.6 no.1 s.17
• /
• pp.24-31
• /
• 2002

The enterprise are facing potential SHE(safety, health and environment) accident to cause casualties or a financial loss and increasing social responsibility. So, SHE management system has to be voluntarily accomplished rather than passively with regard to SHE regulation. In this study, KW_SHE(Kwangwoon Safety, Health and Environment) management model is developed which materialize self-regulation SHE management system of individual workplace by the research and analysis of many domestic enterprise. This KW-SHE management model is intend to assess work-product vs. management expenses investment and critically evaluated for studying its benefits and limitations

• Journal of Welding and Joining
• /
• v.30 no.4
• /
• pp.31-37
• /
• 2012

In recent years, a demand for precision-welding is increasing in wide industrial fields for getting a high quality welded structures. Although laser welding is commonly used for precision-welding, gas tungsten arc (GTA) welding is also attempted as a precision-welding due to the cost benefit. However, welding heat causes an uneven temperature distribution leading to welding deformation. Since it causes geometric errors and degrades product quality, welding distortion recently rises as an important issue in the field of automobile parts. To control welding deformation, it is needed to design in shapes that can maximize stiffness against deformation during welding; control the welding sequence; minimize heat input; and weld allowing reverse deformation; etc. Thus it is necessary to find the one, among such approaches, that can minimize the deformation range by mathematical analysis and understand how effective it would be when it is actually used in industrial fields. This study performs analyses by numerical calculations and experiments for the De-Tent Lever, one of transmission part that requires precision the most among automobile parts, as the subject of experiment. Decrease in welding deformation is required for this part, since there is currently a trouble in guaranteeing precision due to angular deformation by welding between boss and plate. Finally the ways to minimize welding deformation has been suggested in this study through analyses on it.

• Journal of Radiation Industry
• /
• v.8 no.2
• /
• pp.133-140
• /
• 2014

The sterilization of health care products is widely used to choose conventional Ethylene Oxide gas sterilization in South Korea. But the method has brought serious issues because of the toxic residual gas and global warming of $CO_2$ evacuation after the sterilization process. This study is carried out to confirm the application possibility of gamma sterilization instead of Ethylene Oxide in sanitary aid products. Four kinds of products (gauze, menstrual pad, bandage, menstrual tampon) were treated with gamma irradiation of 15 kGy, then analyzed the achievement of the sterility assurance level (SAL) $10^{-6}$ through BI test. The cytotoxicity of accelerated samples of 6 months elapse evaluated by means of colony forming rate at various concentration of the extracts. pH and UV measurements at extract concentrations were tested according to the MFDS (Ministry of food & drug safety) guideline to verify a stability & safety of product sterilized. The results revealed that the extracts did not show any significant changes in cytoxicity assay as well as pH and UV values by gamma sterilization. All extract concentration was observed high cell viability, pH and UV values were calculated within the acceptable range prescribed by the guideline. It indicates that gamma sterilization could effectively substitute for conventional sterilization such as Ethylene Oxide sterilization in the sanitary aid products.

• Design & Manufacturing
• /
• v.13 no.2
• /
• pp.1-5
• /
• 2019

In this study, micro cellular injection molding of automobile head lamp housing with uneven thickness structure was performed to obtain improvement on deformation and light-weight of the part. The thickness of the presented model was uniformly modified to control the deformation of the molded part. In order to maximize the lightweight ratio, the model having an average thickness of 2.0 mm were thinly molded to an average thickness of 1.6 mm. GFM(Gas Free Molding) and CBM(Core Back Molding) technology were applied to improve the problems of the conventional foam molding method. Equal Heat & Cool system was also applied by 3D cooling core and individual flow control system. Warpage of the molded parts with even cooling was minimized. To improve the mechanical properties of foamed products, complex resin containing nano-filler was used and variation of mechanical properties was evaluated. It was shown that the weight reduction ratio of products with light-weighted injection molding was 8.9 % and the deformation of the products was improved from the maximum of 3.6 mm to 2.0 mm by applying Equal Heat & Cool mold cooling system. Also the mechanical strength reduction of foamed product was less than 12% at maximum.

• Journal of the Korean Institute of Gas
• /
• v.23 no.1
• /
• pp.47-53
• /
• 2019

A variety of general purpose polymer products such as polyethylene (PE), polypropylene (PVC), polyvinyl chloride (PVC), polystyrene (PS) and polyurethane (PU) are widely produced and used in the industrial field. Many industrial accidents have occurred due to fire and explosion at the manufacturing site. In order to prevent such accidents, it is important to collect and analyze accident cases that occurred in the past to identify the characteristics of accidents and to use them to prevent the same kind of accidents or similar accidents. In this study, the accident distribution characteristics of general polymer manufacturing process were examined by using SPSS based on the database of the industrial accident statistics system operated by the Korea Occupational Safety and Health Agency. These results can be used to prevent accidents in the general-purpose polymer product process and ensure the safety of the process.

• Transactions of the Korean hydrogen and new energy society
• /
• v.32 no.6
• /
• pp.565-572
• /
• 2021

Hydrogen is currently produced from natural gas reforming or industrial process of by-product over than 90%. Additionally, there are green hydrogens based on renewable energy generation, but the import of green hydrogen from other countries is being considered due to the output variability depending on the weather and climate. Due to low density of hydrogen, it is difficult to storage and import hydrogen of large capacity. For improving low density issue of hydrogen, the gaseous hydrogen is liquefied and stored in cryogenic tank. Density of hydrogen increase from 0.081 kg/m³ to 71 kg/m3 when gaseous hydrogen transfer to liquid hydrogen. Density of liquid hydrogen is higher about 800 times than gaseous. However, since density and boiling point of liquid hydrogen is too lower than liquefied natural gas approximately 1/6 and 90 K, to store liquid hydrogen for long-term is very difficult too. To overcome this weakness, this paper introduces storage method of hydrogen based on liquid/solid (slush) and facilities for producing slush hydrogen to improve low density issue of hydrogen. Slush hydrogen is higher density and heat capacity than liquid hydrogen, can be expected to improve these issues.