• Journal of applied mathematics & informatics
• /
• v.5 no.2
• /
• pp.301-301
• /
• 1998

• Communications of the Korean Mathematical Society
• /
• v.21 no.2
• /
• pp.363-374
• /
• 2006

A new bivariate beta distribution based on the Appell function of the third kind is introduced. Various representations are derived for its product moments, marginal densities, marginal moments, conditional densities and conditional moments. The method of maximum likelihood is used to derive the associated estimation procedure as well as the Fisher information matrix.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.7
• /
• pp.1025-1029
• /
• 2003

The effect studied was that of the feeding of shrimp by-product meal, as a source of eicosapentaenoic and docosahexaenoic acid, on growth performance and fatty acid composition of adipose tissue in growing pigs kept on small holdings in Central Vietnam. Shrimp by-product meal was exchanged with ruminant meal so that the diets contained either 0, 10 or 20% shrimp byproduct meal in the dry matter. The diets were fed on 6 different small-holder farms. The farmers fed a base diet according to their personal choice, but were instructed as to the use of shrimp by-product and ruminant meal. The diets were fed to the pigs from 70 to 126 days of age. There were three animals per treatment group per farm. The diets without and with 20% shrimp by-product meal on average contained 0.01 and 0.14 g docosahexaenoic acid/MJ of metabolisable energy (ME). Due to the higher contents of ash and crude fiber, the shrimp by-product meal containing diets had lower energy densities than the control diets. Eicosapentaenoic acid was not detectable in adipose tissue; the content of docosahexaenoic acid was generally increased after consumption of shrimp by-product meal. In spite of the concurrent high intakes of ash and crude fiber, the feeding of shrimp by-product meal had a general stimulatory effect on growth performance of the growing pigs. The intake of docosahexaenoic acid or its content in adipose tissue was not related with average daily gain. It is suggested that shrimp by-product meal may contain an unknown growth enhancing factor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.7C
• /
• pp.611-617
• /
• 2010

In this paper, we investigate the performances of the serial concatenated convolutional codes (SCCC) and low-density parity-check (LDPC) codes on perpendicular magnetic recording (PMR) channels. We discuss the performance of two systems when user bit-densities are 1.7, 2.0, 2.4 and 2.8, respectively. The SCCC system is less complex than LDPC system. The SCCC system consists of recursive systematic convolutional (RSC) codes encoder/decoder, precoder and random interleaver. The decoding algorithm of the SCCC system is the soft message-passing algorithm and the decoding algorithm of the LDPC system is the log domain sum-product algorithm (SPA). When we apply the iterative decoding between channel detector and the error control codes (ECC) decoder, the SCCC system is compatible with the LDPC system even at the high user bit density.

• Geomechanics and Engineering
• /
• v.10 no.2
• /
• pp.207-224
• /
• 2016

Granulated coal ash (GCA), a mixture of the by-product from milling processes with a small amount of cement added, has recently come to be used as a new form of geomaterial. The shear strength and deformation behaviours of GCA are greatly determined by its relative density or void ratio. A series of drained triaxial compression tests were performed on cylindrical specimens of GCA at confining pressures of between 50 kPa and 400 kPa at initial relative densities of 50%, 70% and 80%. Experimental results show that a rise in relative density increases the peak shear strength and intensifies the dilation behaviour. The initial tangent modulus and secant modulus of the stress-strain curve increase with increasing initial relative density, whereas the axial and volumetric strains at failure decrease with level of initial relative density. The stress-dilatancy relationships of GCA at different relative densities and confining pressures display similar tendency. The dilatancy behaviour of GCA is modelled by the Nova rule and the material property N in Nova rule of GCA is much larger than that of natural sand.

• Microbiology and Biotechnology Letters
• /
• v.25 no.1
• /
• pp.68-74
• /
• 1997

The conversion of D-sorbitol to L-sorbose by Gluconobater suboxydans was analyzed, and continuous production of L-sorbose was carried out in immobilized cell reactors. L-Sorbose production by high densities of resting cells was more effective than by conventional batch fermentations. Sorbitol dehydrogenase, an enzyme converting D-sorbitol to L-sorbose, did not suffer from substrate inhibition, but from product inhibition. When L-sorbose production was carried out with Ca-alginate-immobilized cells, about 60 g/l of L-sorbose was obtained. On the other hand, when the corn steep liquor (CSL) concentration of medium was reduced to 0.08%, 80 g/l of L-sorbose was obtained. Outgrowth inside the immobilized carriers was thought to block the pores of the carriers so that substrate could not easily diffuse through the carriers. Continuous production of L-sorbose was well accomplished in a bubble column reactor, and 6. 5 g/l.h of productivity and 81.2% of yield were obtained at a substrate feeding rate of 0.08h$^{-1}$ under the optimum conditions with carrier volume of 55% and aeration rate of 3 vvm.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1336-1340
• /
• 2011

Molecular dynamics simulations have been performed to investigate the transport properties of self-diffusion coefficients in the penetrable-sphere model system. The resulting simulation data for the product of the packing fraction and the self-diffusion coefficient exhibit a transition from an increasing function of density in lower repulsive systems, where the soft-type collisions are dominant, to a decreasing function in higher repulsive systems, where most particle collisions are the hard-type reflections due to the low-penetrability effects. A modified Enskog-like equation implemented by the effective packing fraction with the mean-field energy correction is also proposed, and this heuristic approximation yields a reasonably good result even in systems of high densities and high repulsive energy barriers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.9 no.5
• /
• pp.34-42
• /
• 1972

Current noise is an important indication of quality in deposited carbon film resistors. Imperfections in the resistive film create high current densities and consequently high current noise. The magnitude of current noise is depend upon many inherent properties of the resistor such as resistive material and others such as processing, fabrication and packing of resistive elements, etc. Performance tests have definitely established a correlation between current noise and electrical performance of carbon film resistors. To interprete the normal distribution of the current noise index for representative groups of resistors would serve as a powerful tool in judging the Quality control and product uniformity by the manufacturer.

• Korean Journal of Materials Research
• /
• v.27 no.5
• /
• pp.248-254
• /
• 2017

In the present work, graphene powder was synthesized by laser scribing method. The resultant flexible light-scribed graphene is very appropriate for use in micro-supercapacitors. The effect of the laser scribing process in reducing graphene oxide (GO) was investigated. GO was synthesized using a chemical mixture of GO solution; then, it was coated onto a LightScribe DVD disk and laser scribed to reduce GO and create laser-scribed graphene (LSG). The CV curves of pristine rGO at various scan rates showed that the ultimate product possesses the ability to store energy at the supercapacitor level. Charge-discharge curves of pristine rGO at two different current densities indicated that the specific capacitance ($C_m$) increases due to the reduction of the discharge current density. Finally, the long-term charge-discharge stability of the LSG was plotted and indicates that the specific capacitance decreases very slightly from its primary capacitance of ${\sim}10F\;cm^{-3}$ and that the cyclic stability is favorable over 1000 cycles.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.4
• /
• pp.1-6
• /
• 2001

Today's paper industry tries to use greater amount of high yield pulp and recycled fiber and to close mill water system, which results in higher fines content and buildup of organic and inorganic contaminants in white water system. Researches are being focused to develop chemical additives that provide good retention and drainage in a closed papermaking system. A microparticle retention system consisted of cationic guar gum and anionic colloidal silica so has been developed to meet the requirements for improving machine speed and product quality. The objective of this investigation was to determine the effects of the degree of cationic guar gums, charge density and structure of anionic colloidal silica sols, and the degree of system closure on the performances of this microparticle retention system. Cationic guar gums and anionic colloidal silica sols with higher charge densities showed better retention performance. Particularly, wider maximum in retention was obtained when structure colloidal silica was used suggesting as mechanism of microparticle bridging is functioning in this system.