• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.3
• /
• pp.112-121
• /
• 2020

In suspension bridges, hanger cables are the main load-supporting members. The tension of the hanger cables of a suspension bridge is a very important parameter for assessing the integrity and safety of the bridge. In general, indirect methods are used to measure the tension of the hanger cables of a suspension bridge in traffic use. A representative indirect method is the vibration method, which extracts modal frequencies from the cables' responses and then measures the cable tension using the cables' geometric conditions and the modal frequencies. In this study, the image processing technique is applied to facilitate the estimation of the dynamic responses of the cables using the image signal, for which a portable digital camcorder was used due to its convenience and cost-efficiency. Ambient vibration tests were conducted on a suspension bridge in traffic use to verify the validity of the back analysis method, which can estimate the tension of remote hanger cables using the modal frequencies as a parameter. In addition, the tension estimated through back analysis method, which was conducted to minimize the difference between the modal frequencies calculated using finite element analysis of the hanger cables and the measured modal frequencies, was compared with that measured using the vibration method.

• The KIPS Transactions:PartA
• /
• v.13A no.4 s.101
• /
• pp.343-350
• /
• 2006

In this paper, wireless internet proxy server clusters are used for the wireless internet because their caching, distillation, and clustering functions are helpful to overcome the limitations and needs of the wireless internet. A wireless Internet proxy server cluster needs a systematic scalability, simple communication structure, cooperative caching, and serving Hot Spot requests. In our former research, we proposed the CD-A structure which can be scalable in a systematic way and has a simple communication structure but it has no cooperative caching. A hash based load balancing can be used to solve the problem, but it can not deal with Hot Spot request problem. In this paper, we proposed a shared storage based wireless internet proxy server cluster which has a systematic scalability, simple communication structure, cooperative caching, and serving Hot Spot requests. The proposed method shares one cache directory and it has advantages: advantages of the existing CD-A structure, cooperative caching, and serving Hot Spot requests. We performed experiments using 16 PCs and experimental results show high performance improvement of the proposed system compared to the existing systems in Hot Spot requests.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.2
• /
• pp.148-154
• /
• 2014

Photoelasticity is a useful technique for obtaining the differences and directions of principal stresses in a model. In conventional photoelasticity, the photoelastic parameters are measured manually point by point. Identifying and measuring photoelastic data is time-consuming and requires skill. The fringe phase shifting method was recently developed and has been found to be convenient for measuring and analyzing fringe data in photo-mechanics. This paper presents an experimental study on the stress distribution along a horizontal line that passes the central point of a rhombus plate made of Photoflex (i.e., type of urethane rubber). The isoclinic fringe and/or principal stress direction is constant on this horizontal line, so a four-bucket phase shifting method can be applied. The method requires four photoelastic fringes that are obtained from a circular polariscope by rotating the analyzer at $0^{\circ}C$, $45^{\circ}C$, $90^{\circ}C$ and $135^{\circ}C$. Experimental measurements using the method were quantitatively compared with the results from FEM analysis; the results from the two methods showed comparable agreement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3336-3344
• /
• 2014

The purpose of this study is small scale coagulation module is developed and demonstrated through a lab-scale test. Recent as a sewage treatment rate increases, have heightened the interest in the necessity on the nonpoint source and developing a small processing unit has been increased. Coagulation sedimentation module in this study is additional growth of floc through swirling in the outside zone, reduction of microstructure floc number and the internal settling zone through vertical/level flow complex sedimentation method after the coagulation process precipitation method as an effective high separation efficiency can be divided was also assessed. Coagulation sedimentation module can increase the load factor was 4.4 times compared to conventional clarifier base on the same volume and surface area through vertical/level flow. In this study, this process was selected formation and maintenance of swirling and uniform flow distribution in the internal settling zone as an important design factor, to derive its FLUENT was used to characteristics of the flow model. Through the simulation of swirling, influent velocity, dimensions of external basin, hopper depth of bottom cone was determined and through analysis of velocity distribution, flow distribution detailed specifications are derived like as diameter and number of effluent hole. Lab-scale($120{\ell}/hr$) test results, influent of 300~800 NTU to less than 10 NTU without polymer feeding was able to operate in the 20minutes retention time(surface loading rate $37.3m^3/m^2$-day), and through analysis FLUENT the possibility of using design parameters were derived.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.455-459
• /
• 2003

In the great motive power which promotes the Game of future to develop. three main factors focus on 3D Graphics, Network and Virtual Reality. the Network technique as necessary elemental technique in Next-generation on-line game is being researched largely. However, from viewing the features of on-line game, if many users meet in same server, it not only causes heavy load to the server and brings inconvenience to the users, but also increases expense to the service provider and creates a problem which is to put up server or not. A proposal is going to do hybrid distributed system a client hardly depends on server for this paper, and to be able to enjoy a network game through information alternating current between clients. depended on the existing server, and the most message processing did a design in order to achieve between clients. A design way to propose is as follows. Primarily it was done in order proposed a message grade anger process way, and to be able to manage server or a client according to importance of message, and, with the second, did a Client-Server method and a Pear-to-Pear method at the same time, and a chase did efficiency. Third is going to propose other problem solving way by message grade anger in multi-anger and a security section of a message cue.

• The KIPS Transactions:PartC
• /
• v.17C no.2
• /
• pp.197-204
• /
• 2010

An effective integration of web-based learning environment and mobile device technology is considered as a new challenge to the developers. The screen size, however, of the mobile device is too small, and its performance is too inferior. Due to the foregoing limit of mobile technology, displaying bulk data on the mobile screen, such as a cyber lecture accompanied with real-time image transmission on the web, raises a lot of problems. Users have difficulty in recognizing learning contents exactly by means of a mobile device, and continuous transmission of video stream with bulky information to the mobile device arouses a lot of load for the mobile system. Thus, an application which is developed to be applied in PC is improper to be used for the mobile device as it is, a player which is fitting for the mobile device should be developed. Accordingly, this paper suggests mobile presentation using transcoding techniques of the field concerned. To display continuous video frames of learning image, such as a cyber lecture or remote lecture, by means of a mobile device, the performance difference between high-resolution digital image and mobile device should be surmounted. As the transcoding techniques to settle the performance difference causes damage of image quality, high-quality image may be guaranteed by application of trial and error between transcoding and selected learning resources.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.9 no.4
• /
• pp.420-425
• /
• 1999

The maximum demand controller is an electrical equipment installed at the consumer side of power system for monitoring the electrical energy consumed during every integrating period and preventing the target maximum demand (MD) being exceeded by disconnecting sheddable loads. By avoiding the peak loads and spreading the energy requirement the controller contributes to maximizing the utility factor of the generator systems. It results in not only saving the energy but also reducing the budget for constructing the natural base facilities by keeping thc number of generating plants ~ninimumT. he conventional MD controllers often bring about the large number of control actions during the every inteyating period and/or undesirable loaddisconnecting operations during the beginning stage of the integrating period. These make the users aviod the MD controllers. In this paper. fuzzy control technique is used to get around the disadvantages of the conventional MD control system. The proposed MD controller consists of the predictor module and the fuzzy MD control module. The proposed forecasting method uses the SOFM neural network model, differently from time series analysis, and thus it has inherent advantages of neural network such as parallel processing, generalization and robustness. The MD fuzzy controller determines the sensitivity of control action based on the time closed to the end of the integrating period and the urgency of the load interrupting action along the predicted demand reaching the target. The experimental results show that the proposed method has more accurate forecastinglcontrol performance than the previous methods.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.6
• /
• pp.127-138
• /
• 2019

The data response speed is a critical issue of cloud services because it directly related to the user experience. As such, the in-memory database is widely adopted in many cloud-based applications for achieving fast data response. However, the current implementation of the in-memory database is mostly based on the linked list-based hash table which cannot guarantee the constant data response time. Thus, cuckoo hashing was introduced as an alternative solution, however, there is a disadvantage that only half of the allocated memory can be used for storing data. Subsequently, bucketized cuckoo hashing (BCH) improved the performance of cuckoo hashing in terms of memory efficiency but still cannot overcome the limitation that the insert overhead. In this paper, we propose a data management solution called Wall Cuckoo which aims to improve not only the insert performance but also lookup performance of BCH. The key idea of Wall Cuckoo is that separates the data among a bucket according to the different hash function be used. By doing so, the searching range among the bucket is narrowed down, thereby the amount of slot accesses required for the data lookup can be reduced. At the same time, the insert performance will be improved because the insert is following up the operation of the lookup. According to analysis, the expected value of slot access required for our Wall Cuckoo is less than that of BCH. We conducted experiments to show that Wall Cuckoo outperforms the BCH and Sorting Cuckoo in terms of the amount of slot access in lookup and insert operations and in different load factor (i.e., 10%-95%).

• Smart Structures and Systems
• /
• v.24 no.6
• /
• pp.769-781
• /
• 2019

Dynamic displacement response of civil structures is an important index for in-construction and in-service structural condition assessment. However, accurately measuring the displacement of large-scale civil structures such as high-rise buildings still remains as a challenging task. In order to cope with this problem, a vision-based system with the use of industrial digital camera and image processing has been developed for long-distance, remote, and real-time monitoring of dynamic displacement of supertall structures. Instead of acquiring image signals, the proposed system traces only the coordinates of the target points, therefore enabling real-time monitoring and display of displacement responses in a relatively high sampling rate. This study addresses the in-situ experimental verification of the developed vision-based system on the Canton Tower of 600 m high. To facilitate the verification, a GPS system is used to calibrate/verify the structural displacement responses measured by the vision-based system. Meanwhile, an accelerometer deployed in the vicinity of the target point also provides frequency-domain information for comparison. Special attention has been given on understanding the influence of the surrounding light on the monitoring results. For this purpose, the experimental tests are conducted in daytime and nighttime through placing the vision-based system outside the tower (in a brilliant environment) and inside the tower (in a dark environment), respectively. The results indicate that the displacement response time histories monitored by the vision-based system not only match well with those acquired by the GPS receiver, but also have higher fidelity and are less noise-corrupted. In addition, the low-order modal frequencies of the building identified with use of the data obtained from the vision-based system are all in good agreement with those obtained from the accelerometer, the GPS receiver and an elaborate finite element model. Especially, the vision-based system placed at the bottom of the enclosed elevator shaft offers better monitoring data compared with the system placed outside the tower. Based on a wavelet filtering technique, the displacement response time histories obtained by the vision-based system are easily decomposed into two parts: a quasi-static ingredient primarily resulting from temperature variation and a dynamic component mainly caused by fluctuating wind load.

• Conservation Science in Museum
• /
• v.25
• /
• pp.9-26
• /
• 2021

This paper describes the production methods that were originally used for an arrow bundle excavated from a Bronze Age residential area in Auraji in Jeongseon, Gangwon-do Province and the conservation treatment process that it subsequently underwent. An arrow conventionally consists of an arrowhead and a shaft. It is rare to excavate a shaft along with an arrowhead in a complete form since the shaft is made of organic materials. Notably, the arrow bundle from the Auraji site is of great significance as it shows traces of tangless stone arrowheads attached to charred shafts and offers an important case of the split end of a piece of a tree being inserted into an arrowhead. For a further examination of the characteristics of the arrows from Auraji, microscopic investigation was conducted and the type of wood used for the arrow shafts was examined. The sequence and direction of processing and the particle sizes of the grinding tools were revealed through the analysis of traces of grinding on the stone arrowheads. The shaft is presumed to have been made from a green length of three-year-old willow (Salix spp.). A curing agent with a high degree of waterproofing and reversibility was used during the on-site curing process according to demands of the surrounding environment, and a technique that the authors call the "Bridge" method was used for emergency collection of the relics. Once the bundle was transferred to the conservation treatment lab, reinforcing materials were carefully chosen as it was important not to damage the relics during the process of turning them for the repair of their reverse sides. For this purpose, artificial clay was selected since it can safely bear a load and has excellent physical properties. Finally, detached parts were rejoined, the relics and their surrounding materials were cleaned, and the bottom sides were finished with epoxy resin prior to the display of the relics at the museum.