• Journal of the Korea Safety Management & Science
• /
• v.7 no.2
• /
• pp.141-151
• /
• 2005

EPC seeks to minimize variability by transferring the output variable to a related process input(controllable) variable, while SPC seeks to reduce variability by detecting and eliminating assignable causes of variation. In the case of product control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We consider an alternative EPC model with second-order autoregressive disturbance. We compare three control systems; EPC, EPC combined with EWMA. This paper shows through simulation that tlhe performance of the integrated model of EPC and EWMA is more preferable than that of EPC.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.33 no.3
• /
• pp.146-153
• /
• 2010

When the production run is short and process parameters change frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shifts in the magnitude of CV. The CV-EWMA(exponentially weighted moving average) control chart which was developed recently is effective in detecting a small shifts of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. In this paper, we propose an FIR(Fast initial response) CV-EWMA control chart to improve the sensitivity of a CV-EWMA scheme at process start-up or out-of-control process. Moreover, we suggest the values of design parameters and show the results of the performance study of FIR CV-EWMA control chart by the use of average run length(ARL). Also, we compared the performance of FIR CV-EWMA control chart with that of the CV-EWMA control chart and we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.4
• /
• pp.114-120
• /
• 2008

The control chart is widely used statistical process control(SPC) tool that searches for assignable cause of variation and detects any change of process. Generally, ${\bar{X}}-R$ control chart and ${\bar{X}}-S$ are most frequently used. When the production run is short and process parameter changes frequently, it is difficult to monitor the process using traditional control charts. In such a case, the coefficient of variation (CV) is very useful for monitoring the process variability. The CV control chart is an effective tool to control the mean and variability of process simultaneously. The CV control chart, however, is not sensitive at small shift in the magnitude of CV. In this paper, we propose an CV-EWMA (exponentially weighted moving average) control chart which is effective in detecting a small shift of CV. Since the CV-EWMA control chart scheme can be viewed as a weighted average of all past and current CV values, it is very sensitive to small change of mean and variability of the process. We suggest the values of design parameters and show the results of the performance study of CV-EWMA control chart by the use of average run length (ARL). When we compared the performance of CV-EWMA control chart with that of the CV control chart, we found that the CV-EWMA control chart gives longer in-control ARL and much shorter out-of-control ARL.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.621-628
• /
• 2008

Many of today's businesses need IT system's flexibility for on-demand business which can be rapidly adapted to environment changes. Service oriented architecture (SOA) provides the infrastructure which makes business flexibility possible under the on-demand operating environment. Therefore, to satisfy these requirements, new approach for assuring business flexibility and enhancing reuse is needed. In this paper, we propose an approach for developing a business process family model (BPFM) in which the variabilities in business process family can be explicitly represented by using the variability analysis method of software product line. In addition, we describe the supporting tool for this approach. It can model the BPFM and generate automatically BPMs through decision and pruning process from BPFM. By using our approach, the business and its IT system can correspond to business environment changes rapidly and efficiently.

• Journal of KIISE:Software and Applications
• /
• v.36 no.5
• /
• pp.386-395
• /
• 2009

Business entities with which most service components interact are kind of cross-cutting concerns in a multi-layered distributed application architecture. When business entities are modified, service components related to them should also be modified, even though they implement common functions of the application framework. This paper proposes what we call DTT (Data Type-Tolerant) component model to process the variability of business entities, or externalized data, which feature modern application architectures. The DTT component model expresses the data variability of product lines at the implementation level by means of SCDTs (Self-Contained Data Types) and variation point interfaces. The model improves the efficiency of application engineering through data type converters which support type conversion between SCDTs and business entities of particular applications. The value of this model lies in that data and functions are coupled locally in each component again by allowing service components to deal with SCDTs only instead of externalized business eutities.

• Journal of Environmental Impact Assessment
• /
• v.9 no.3
• /
• pp.185-202
• /
• 2000

Uncertainty and variability in Life Cycle Assessment(LCA) have been significant key issues in LCA methodology with techniques in other research area such as social and political science. Variability is understood as stemming from inherent variations in the real world, while uncertainty comes from inaccurate measurements, lack of data, model assumptions, etc. Related articles in this issues were reviewed for classification, distinguish and elaboration of probabilistic/stochastic health risk analysis application in LCA. Concept of focal zone, streamlining technique, scenario modelling and Monte Carlo/Latin Hypercube risk analysis were applied to the uncertainty/variability analysis of health risk in LCA. These results show that this general framework of multi-disciplinary methodology between probabilistic health risk assessment and LCA was of benefit to decision making process by suppling information about input/output data sensitivity, health effect priority and health risk distribution. There should be further research needs for case study using this methodology.

• Journal of Astronomy and Space Sciences
• /
• v.36 no.3
• /
• pp.149-157
• /
• 2019

In this study, we investigate the associations between the solar variability and teleconnection indices, which influence atmospheric circulation and subsequently, the spatial distribution of the global pressure system. A study of the link between the Sun and a large-scale mode of climate variability, which may indirectly affect the Earth's climate and weather, is crucial because the feedbacks of solar variability to an autogenic or internal process should be considered with due care. We have calculated the normalized cross-correlations of the total sunspot area, the total sunspot number, and the solar North-South asymmetry with teleconnection indices. We have found that the Southern Oscillation Index (SOI) index is anti-correlated with both solar activity and the solar North-South asymmetry, with a ~3-year lag. This finding not only agrees with the fact that El $Ni{\tilde{n}}o$ episodes are likely to occur around the solar maximum, but also explains why tropical cyclones occurring in the solar maximum periods and in El $Ni{\tilde{n}}o$ periods appear similar. Conversely, other teleconnection indices, such as the Arctic Oscillation (AO) index, the Antarctic Oscillation (AAO) index, and the Pacific-North American (PNA) index, are weakly or only slightly correlated with solar activity, which emphasizes that response of terrestrial climate and weather to solar variability are local in space. It is also found that correlations between teleconnection indices and solar activity are as good as correlations resulting from the teleconnection indices themselves.

• Journal of Korean Institute of Industrial Engineers
• /
• v.38 no.2
• /
• pp.89-97
• /
• 2012

This paper considers a manufacturer with a two-station make-to-stock and make-to-order serial production system. The MTS facility produces a single type of component and provides components for the MTO facility that produces customized products. In addition to the internal demand from the MTO facility, the MTS facility faces demands from the spot market with the option of to accept or reject each incoming demand. This paper addresses a joint component inventory rationing and batch production control which maximizes the manufacturer's profit. Using the Markov decision process model, we investigate the structural properties of the optimal inventory rationing and batch production policy, and present two types of heuristics. We implement a numerical experiment to compare the performance of the optimal and heuristic policies and a simulation study to examine the impact of the stochastic process variability on the inventory rationing and batch production control.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.3
• /
• pp.111-127
• /
• 2004

We consider a supply chain model with a make-to-order production facility and a single supplier. The model we treat here is a special case of a two-echelon inventory model. Unlike classical two-echelon systems, the demand process at the supplier is affected by production process at the production facility as well as customer order arrival process. In this paper, we address that how the demand variability impacts on the optimal replenishment policy. To this end, we incorporate Erlang and phase-type demand distributions into the model. Formulating the model as a Markov decision problem, we investigate the structure of the optimal replenishment policy. We also implement a sensitivity analysis on the optimal policy and establish its monotonicity with respect to system cost parameters.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.353-357
• /
• 2007

The Apartment resident's make-up of a family and residing preference are diversified by the change of lifestyle through the elevation of economy level and residing level. Accordingly, the remodeling and the early rebuilding for the satisfaction of a life cycle and a life style are increasing, and "Variability" that is the concept of Open Housing was emphasized as a central of residing plan in the apartment. Although apartments which select the space variability to the residing space are increasing gradually, the optimum composition structural system with space variability that satisfies the structure stability, the economical efficiency and the resident usability is not developed. The method of a study was progressed by a comparison and an analysis on each system with estimation elements through analyzing the development process and the special quality of existing composition structural system with space variability in the apartment. This paper offered the improvement direction on the current composition structural system with space variability for the development of modularizing system that is correct in domestic real condition.