• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.87-92
• /
• 1991

A naphtha reforming process treats the feed naphtha for the production of BTX and high octane gasoline. In this paper, the development of NAFOS (Naphtha Reformer Steady-State Simulator), which is the efficient tool for the wide range of reforming process studies, is presented. NAFOS system is based on the sequential modular approach and composed of unit computation routines, physical properties data base, numerical routines, flowsheet convergence routine and user interfaces for input-output control. The developed NAFOS system has been tested by computation of the UOP Platforrming process. Simulation results of NAFOS corresponded with that of established general purpose simulator (ASPEN PLUS), and faster for the same simulation case.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.5
• /
• pp.108-116
• /
• 1996

A semiconductor process imulator operated in windows$^{TM}$ environment has been developed. two-dimensional process simulation in personal computer has been enabled due to the improvement of CPU speed and the efficient use of memory. The process simulator in this paper is capable of calculating diffusion, oxidation, ion implantation, etching and deposition in two-dimensional manner. In addition, graphic-user-friendly editor, parser, and multi-dimensional graphical routine is also available in the devloped simulator.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.03b
• /
• pp.140-143
• /
• 1999

The major objective of the present paper is to develop a channel cutting machine and to establish an analytical technique for actual shearing process. Isothermal finite element(FE)-simulation of the shearing process are carried out using FE software DEFORM. The element-kill method has enabled the achievement of FE-simulation from the initial stage to the final stage of the shearing process. The effects of the punch-die clearance on the shearing process are investigated.

• Proceedings of the Korean Society Of Semiconductor Equipment Technology
• /
• 2006.05a
• /
• pp.156-159
• /
• 2006

In order to design an evaporation system, geometric simulation of film thickness distribution profile is required. In this paper, a geometric modeling algorithm is introduced for process simulation of the evaporating process. The physical fact of the evaporating process is modeled mathematically. Based on the developed method, the thickness of the thin-film layer can be successfully controlled.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.17-18
• /
• 2022

In Korea, asbestos removal has been actively carried out nationwide since 2015 when asbestos was completely banned as a first-class carcinogen. Since scattering dust generated in the process of removing asbestos causes fatal diseases such as asbestos lung disease and lung cancer, concerns are growing over the safety of construction workers and building users undergoing dismantling. For this reason, regulations on asbestos sites have been strengthened and prior studies on safety and risk assessment have been conducted, but research on actual site data collection and process planning is insufficient even though safety is reduced due to delay in site construction period. Therefore, it is necessary to analyze the work and delay factors of the asbestos dismantling process and develop an optimized process plan model for workers. This study is an initial step to develop an optimized process plan model that considers the safety and productivity of asbestos dismantling work, and aims to help establish an optimized process plan for asbestos dismantling process using website clone simulation.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.175-190
• /
• 1997

Organizational change projects such as Business Process Redisign (BPR) have been perceived to incur high risk due to their high management complexity, enterprise-wide impace, and steep project cost. This research intends to reduce such risk by developing a systematic process redesign methods, called Dynamic Process Modeling (DPM) method. DPM integrates the customer-oriented business process modeling technique with computerized visual simulation technique to promote better understanding of the target process and enable performance simulation of the proposed redesign alternatives prior to actual BPR implementations. For the cusstomer-oriented process modeling, we propose Dynamic-Event Process Chain (Dynamic-EPC) extending from the conceptual customer process model, Event-Process Chain (EPC). We compare DPM with four other implementation-level process modeling methods over eight criteria and demonstrate its effectiveness by applying it to the real-world hospital BPR case.

• Transactions of Materials Processing
• /
• v.8 no.6
• /
• pp.541-553
• /
• 1999

Cold forging is a special type of forging process in which metal is forced to flow plastically under compressive force into a variety of shapes in room temperature. Gear blank, which is produced by cold forging, is concerned with the production method of transmission gear. Based on the results of simulation of the current four-stage process, the gear blank forging process for improving the conventional process sequence is designed. The rigid plastic finite element analysis for improving the conventional process. The new process consists of three stage operations with one annealing treatment after first operation. Based on the results of simulation of the proposed process, a required equipment could be selected. The new designed process appears to be more economical in producing the gear blank.

• Journal of the Korea Society for Simulation
• /
• v.19 no.1
• /
• pp.153-160
• /
• 2010

Most part of errors in software development process are included during the stage of requirements definition and design. And correction or elimination of errors from those stages requires much more efforts and costs than those from the later part of software development process. However, despite of the importance of the validation of requirement definition and design stages, several kinds of problem have made it hard to be done successfully. Therefore, in this paper, we introduce a novel validation process for the preliminary design stage. The validation process is based on simulations of model and it can be used to validate requirements and model simultaneously. Models in the validation process will take only the behavior of software and be built on Ptolemy framework. The usability of our validation process is confirmed with a case study over DNS system environment. And the result of simulation shows well-known errors or vulnerabilities can be found with simulations of model which has the behavior of software. This means our validation process can be used as a process to validate requirements and models during the early stage of software development process.

• Korea-Australia Rheology Journal
• /
• v.12 no.3_4
• /
• pp.165-173
• /
• 2000

Three-dimensional numerical simulation of isothermal/nonisothermal coextrusion process of two immiscible polymers through a rectangular channel has been done using the finite element method. The encapsulation phenomenon with the less viscous layer encapsulating the more viscous layer was investigated with the generalized Newtonian fluids. The interface position around the symmetric plane obtained by numerical simulation nearly coincided with the one observed in experiments, but the degree of encapsulation was less than the one observed experimentally. Open boundary condition method was found to be applied to the simulation of nonisothermal coextrusion process, however, the results are not far from those using the fully developed boundary condition, because the temperature development along the downstream direction is very slow in the case of convection dominated flow. When the inlet velocity is increased, the interface profile does not change in isothermal flow, while it moves upward in nonisothermal situation. The degree of encapsulation decreases along the downstream direction in nonisothermal flow. When the inlet temperature increases compared to the wall temperature, the outlet interface moves downward and the degree of encapsulation increases. The difference of degree of encapsulation between the simulation and the experiments seems to arise from the viscoelastic effect of the materials. It was concluded that the nonisothermal effect alone does not explain the complex coextrusion process and the viscoelastic effect needs to be considered.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.261-269
• /
• 2020

This paper introduces a facility simulation system for efficient error detection of smart factories. The facility simulation system, which can infer and solve errors autonomously when analyzing the relationship between plant facilities, is one of the important technologies for constructing a smart factory with high productivity. In order to implement this autonomic control system, it is necessary to be able to identify the status of facilities and analyze the relationship between facilities through the data of factory facilities. Therefore, in this paper, we design and develop a simulation program that can detect the equipment that causes the process error when an error occurs based on the process scenario using the defined equipment status. The simulation shows that the error inference process based on the process map and facility status is more efficient than the general error inference process. This simulation program provides an intuitive view of the reasoning and resolution of facility failures.