• 한국전자거래학회지
• /
• 제7권3호
• /
• pp.219-240
• /
• 2002

The various software engineering techniques have been appeared in order to cope with the software crisis since 1980's. Currently, the research against the techniques likes the Design pattern, Component which improve the software's re-use are spread out. Also S/W Development Process are interested intensively which attempts the quality and a increasing productivity of software development with the basic policy. The design pattern is the solution against the problem which occurs repeat in a specific area. Many design pattern are developed and researched, but the method which accommodates the developed design pattern efficiently in the phase of analysis and design software development process is not good enough, so it is the actual applying technique is difficult. In this paper we suggest and the “UML components+” which is a efficient component development process from customizing EJB based the J2EE using the “UML Components” which is a component development methodology. Applying J2EE pattern efficiently with UML components+, there is a possibility of efficiency in the component development based pattern.

• Tribology and Lubricants
• /
• 제22권5호
• /
• pp.243-251
• /
• 2006

Molecular dynamics simulations of nanoimprint lithography NIL) are performed in order to investigate effects of process parameters, such as stamp shape, imprinting temperature and adhesive energy, on nanoimprint lithography process and pattern transfer. The simulation model consists of an amorphous $SiO_{2}$ stamp with line pattern, an amorphous poly-(methylmethacrylate) (PMMA) film and an Si substrate under periodic boundary condition in horizontal direction to represent a real NIL process imprinting long line patterns. The pattern transfer behavior and its related phenomena are investigated by analyzing polymer deformation characteristics, stress distribution and imprinting force. In addition, their dependency on the process parameters are also discussed by varying stamp pattern shapes, adhesive energy between stamp and polymer film, and imprinting temperature. Simulation results indicate that triangular pattern has advantages of low imprinting force, small elastic recovery after separation, and low pattern failure. Adhesive energy between surface is found to be critical to successful pattern transfer without pattern failure. Finally, high imprinting temperature above glass transition temperature reduces the imprinting force.

• 한국산학기술학회논문지
• /
• 제3권2호
• /
• pp.136-140
• /
• 2002

정밀하고 복잡한 형상의 금속 부품을 제작하는데 사용되는 정밀주조법은 왁스형을 만드는 과정을 수작업으로 진행하므로 많은 시간과 비용이 소요되었다. 왁스형 제작공정을 개선하기 위해 쾌속조형기를 이용하는 방법을 제안하였다. SLS 형 쾌속조형기를 이용하여 캐스트폼형을 제작하고 여기에 용융된 왁스를 함침시켜 왁스형을 완성한다. 이 방법을 이용하여 스텐레스 스틸 소재의 금속 주분을 제작하였는데, 시간과 비용이 크게 절감되었으며 정밀도도 향상되었다.

• 패션비즈니스
• /
• 제2권4호
• /
• pp.40-45
• /
• 1998

The purpose of this study is to investigate how to develop the Korean textile pattern design that can respond properly to the demand of consumers. This is very important to maintain a steady growth of the Korean textile and clothing industry. To serve this purpose, this study conduct surveys (through questionnaires) of European textile design industries centering around Italian textile design industry. The survey result shows that in most European textile pattern design studios, the "repeat" process is not necessarily considered as a part of the textile pattern design process and, in fact, the price of textile pattern design with the "repeat" is 30% higher than the price of textile pattern design without the "repeat". The survey result also exhibits that the inclusion of the "repeat" in the textile pattern design process could limit the ability of expressing creative ideas. As a proposal for the development of Korean textile pattern design, this study suggests that the "repeat" process should be separated from the textile design process and specialized as an independent area of the pattern design.

• 디지털산업정보학회논문지
• /
• 제15권4호
• /
• pp.63-70
• /
• 2019

The subject of the simultaneous measuring system of base pattern and deposition pattern is a new research topic on a defect inspection of OLED. In this paper, we propose a new OLED inspection method that simultaneously measures standard and deposition pattern images. This method reduces unnecessary processes and tac time during OLED inspection. For an additional reduction of the tac time during pattern measurement, the ROI was configured to measure only in the designated ROI area instead of measuring the entire area of an image. During the ROI set-up, the value of effective deposition pattern area is included so that if the deposition pattern is out of the ROI zone, it would be treated as a defect before measuring the size and center point of the pattern. As a result, the tac time and inspection process could be shortened. The proposed method also could be applied to the OLED manufacturing process. Production of OLED could be increased by reducing tac time and inspection process.

• 한국기계가공학회지
• /
• 제12권2호
• /
• pp.114-120
• /
• 2013

An EP(Electrolytic Polishing)-MAP(Magnetic Abrasive Polishing) hybrid process was applied to remove burr on the micro pattern. Micro pattern fabrication processes are combined with micro milling and EP-MAP hybrid process for deburring. Depending on the micro milling conditions which are applied, micro burrs are formed around the side and top of the pattern. The EP-MAP deburring is used to remove these burrs effectively. To optimize removal rate and form error in the EP-MAP hybrid process, a design of experiment was performed. The effect of deburring process and form error of micro pattern are evaluated via SEM images and the results of AFM.

• 간호행정학회지
• /
• 제9권3호
• /
• pp.415-427
• /
• 2003

Purpose: The purpose of this study was to investigate the degree and pattern of knowledge management process, and to identify the relationship between knowledge management process and organizational effectiveness in clinical nurses. Method: Participants were 665 regular clinical nurses who had worked for over 1 year in general units of 9 tertiary medical hospitals including 2 national university hospitals, 5 university hospitals, and 2 hospitals founded by business enterprises. Data were collected from March to May 2003 through questionnaires. Four structured instruments were used to collect the data: Knowledge Management Process Scale(Jeong, Lee, Lee, & Kim, 2003), cCommitment Questionnaire(Mowday, Steers, & Porter, 1979), General Satisfaction Scale(CooK, Hepworth, Wall, & Warr, 1981), and one for general characteristics. The data were analyzed using factor analysis, reliability analysis, descriptive analysis, cluster analysis, one-way ANOVA, Scheffe test, correlation analysis with the SPSS for Windows 10.0 program. Result: 1) The average score for knowledge management process in nurses was $3.08{\pm}.54$ on a 5-point Likert scale. In order from highest mean score, the elements of knowledge management process, were Knowledge $Utilization(3.35{\pm}.57)$, Knowledge $Sharing(3.07{\pm}.58)$, Knowledge $Creation(2.99{\pm}.63)$, and Knowledge $Storage(2.91{\pm}.82)$. 2) Four knowledge management patterns for nurses, which were derived from cluster analysis, were inactivate pattern, delayed pattern, activate pattern, and high-activate pattern of knowledge management. 3) The degree of knowledge management process activation and 4 elements of knowledge management process, Knowledge Creation, Knowledge Storage, Knowledge Sharing, and Knowledge Utilization, were significantly correlated with nurses' organizational commitment and job satisfaction(p=.000). 4) The nurses' organizational commitment and job satisfaction showed significant differences according to the knowledge management patterns derived from cluster analysis of high-activate pattern, activate pattern, delayed pattern, inactivate pattern(p=.000). Conclusion: These results suggest that there are four knowledge management patterns for nurses, and knowledge management process positively affects the nurses' organizational commitment and job satisfaction. From the above findings, knowledge management process is empirically verified as a useful and effective method to increase organizational effectiveness, and develop the organization.

• 정보화연구
• /
• 제10권3호
• /
• pp.295-303
• /
• 2013

This paper presents a new approach to managing dynamic business process changes based on business process change patterns. We identify and categorize business process change patterns that occur recurrently in a dynamic business environment. Several issues regarding management of process versions are discussed, and a pattern-based version management method for handling process changes more flexibly is explained in detail. We propose a mechanism for abstract process execution with runtime encapsulation of a business process, which can maximize the flexibility of process execution using multiple process versions. In addition, we propose a concept of process promotion and demotion that can dynamically choose an actual version of the process at run-time. With our pattern-based process change management and versioning approach, it is expected that the flexibility and efficiency of BPM systems can be enhanced significantly.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.241-244
• /
• 2004

Microlens patterned micro-mold fabrication method for Light Guiding Plate(LGP), kernel part of LCD-BLU(Back Light Unit), was presented. Instead of erosion dot pattern for LCP optical design, microlens pattern, fabricated by LIGA-reflow process, was applied. Optical pattern design method was also developed not only for negative pattern LGP, but also positive pattern LGP. In order to achieve flow balance during the micro-injection molding process and dimensional accuracy, two LGP pattern was made in one micro-mold.

• 산업경영시스템학회지
• /
• 제31권2호
• /
• pp.104-111
• /
• 2008

A process mining is considered to support the discovery of business process for unstructured process model, and a process mining algorithm by using the associated rule and sequence pattern of data mining is developed to extract information about processes from event-log, and to discover process of alternative, concurrent and hidden activities. Some numerical examples are presented to show the effectiveness and efficiency of the algorithm.