• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.2
• /
• pp.7-11
• /
• 2011

A high-speed railway system represents a typical example of large-scale multi-disciplinary system, consisting of subsystems such as rolling-stock, electrical hardware, electronics, control, information, communication, civil technology etc. The system design and acquisition data of the large-scale system must be the subject under strict configuration control and management. Systems engineering technology development project for Korea next generation High-speed Electric Multiple Unit (HEMU) system in progress is a national large system development project that is not only a large-size and complex but also multi-disciplinary in nature. Therefore, all stakeholders must understand and share the functional and performance requirements of HEMU throughout its life-cycle phases. Also in the test and evaluation phase, all systems requirements must be verified. In 2011, the prototype train manufacturing will be completed. It will do test run on the commercial line and all systems requirements are verified until 2012. For the system verification, the test and evaluation process have to be established before the test trial run. Using a systems engineering tool, the system design database(SDD) with requirements traceability and development process management in the course of the development have to be established. This paper represents the test and evaluation process development based on the SEMP(Systems Engineering Management Plan) developed in the design stage. The test and evaluation process is refined and updated in comparison to the design stage one. The test and evaluation process consists of procedure, test and evaluation method and schedule. So through this process, it is defined that each systems requirements is verified on which test and about what time.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.6
• /
• pp.64-78
• /
• 1998

In this paper, on the basis of factory rationalization, the detection and evaluation system of weak assembly process was developed to analyze the processes for improvement of assembly productivity in the current assembly system. Using this detection and evaluation system of weak assembly process, the weak degrees of assembly process were quantitatively calculated. In this system, the improved design rules were constructed for assemblability and the redesign alternative was Presented for elimination of weak Process. After review of the redesign alternative, it was applied to the actual assembly system.

• Korean Medical Education Review
• /
• v.25 no.2
• /
• pp.174-183
• /
• 2023

Educational evaluation involves data collection and the analysis of various education-related factors to make decisions that improve educational quality. Systematic educational evaluation is essential for enhancing the quality of education. This study reports a case of student-conducted process evaluation of a medical school's student support system and the procedure for devising improvement plans. Sixteen Inje University College of Medicine students participated in the Education Evaluation Committee (IUCM-EEC) to understand the educational improvement process as learners and actively achieve improvement. The Quality Improvement Committee of the Inje University College of Medicine (IUCM-QIC) decided to reform its student support system based on a previous educational evaluation in 2019. The evaluation of the student support system was conducted for 10 months in 2021 by the student subcommittee, under the guidance of the IUCM-EEC. The CIPP (context-input-process-product) evaluation model was used for a systematic evaluation. Accordingly, the subcommittee developed evaluation criteria and indicators, and analyzed relevant data collected from surveys and the previous literature. For further recommendations and revision ideas, the student subcommittee members interviewed faculty members from six other medical schools and also conducted a focus group interview with the dean and vice deans of IUCM. Finally, the student subcommittee submitted a report to the IUCM-QIC. Communication with various stakeholders is essential for a successful evaluation process. In this case, students, as key stakeholders in education, evaluated the student support system. Their active participation helped improve their understanding of the evaluation process.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.25.2-31
• /
• 2000

Recently, Fuzzy theory has been applied in evaluation problem. Fuzzy evaluation based on Fuzzy theory can accommodate fuzziness of judgement with people through introducing Fuzzy measure. Representative Fuzzy evaluation is Fuzzy Integral using Fuzzy measure. Definite methodology using Fuzzy Integral HFI(Hierarchical Fuzzy Integrals), HFEA(Hierarchical Fuzzy Evaluation Algorithm), HFP(Hierarchical Fuzzy Process), etc. In this paper, we deal with problem identifying evaluation value using Fuzzy Relation Equation at these Fuzzy evaluation. We verify relation between Input data and Output data through @-operation and apply this to HFP. And that we verify evaluation value which objects of evaluation are able to possess.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.305-307
• /
• 2014

Pyroprocessing (or pyrometallurgy) is the way of extracting from materials subjected to high temperatures. Generally, this process has a high energy consumption because of mass production and heating-up. To attain effective and efficient energy management, energetic analysis using 0-dimensional model is usually conducted. However, this model can lead to a misunderstanding about energy evaluation due to many assumptions and limitations. In this study, heat & mass balance using 0-dimensional model was reviewed to systematize problems and considerations in general process energy evaluation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.1 no.1
• /
• pp.57-65
• /
• 1975

A perfect evaluation for scientists and engineers is impossible unless the R&D process is fully explored. But the study in this area is being intencified, and consequently progress is being made. In this paper an evaluation method for scientists and engineers in project-oriented R&D organizations is developed. That is, a method that the evaluation for the job performance directly influences personnel management such as promotion, and the evaluation for their potential, characteristics influences indirectly. Further systematization of evaluation process, which is no less importatant than evaluation itself, is attempted.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.195-203
• /
• 2008

The purpose of this study is to develop a guideline of process capability evaluation and to apply this guideline improving the quality of products, especially in the small and medium enterprises. In this study we deal in the concept of process capability evaluation, the calculation of process capability index, and the application of a case study. Man must compare the state of process with the standards in evaluating of the process capability. Control chart can be used as a yardstick for judgement for the long term period and the distribution shape of histogram for the short term period. Man should regard to the significant figure by the calculation of process capability index.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.6 no.3
• /
• pp.191-201
• /
• 2010

The Korean central government has been investing a lot of efforts to promote performance of local governments. For example, the Ministry of Public Administration and Security (MOPAS) supported the local governments to develop and provide with a 'balanced score card' and a 'customer satisfaction innovation. ' Many other central ministries also conducted individual evaluations for local governments in their substantive policy areas. These evaluation systems of 78 appraisals for local governments conducted by the MOPAS and other ministries had made the local governments to work harder. However, most local governments have appealed their 'reform fatigue' caused by the overlapping evaluation systems. In this context, the MOPAS initiated merging the evaluations into a co-evaluation system under the new Government Performance Evaluation Act of 2006. In this process of introduction of new evaluation system, there are two significant movements. Firstly, as Korean Government has strong information technology, MOPAS has developed 'Virtual Policy Studio (VPS)' which evaluates the performance of each local government with on line. In other words, in the co-evaluation system for local government performance most evaluation steps are implemented by computer and Internet. So most stakeholder can access and work on the VPS in real time when they want to. And the other thing is that cooperation among stakeholders has been occurred in the co-evaluation system. Furthurmore the cooperative governance is systemized and sustain for a long time because MOPAS made IT based co-evaluation system. Therefore this paper intends to illustrate the process of introduction of VPS, main process of co-evaluation system based on VPS and analyze collaborative governance of the co-evaluation system.

• IE interfaces
• /
• v.20 no.3
• /
• pp.387-394
• /
• 2007

Numerous countries promote business programs to revitalize local economy, increase employment, and nurture high-tech industries. Recently, a number of business incubators have been established and operated with aims to adapt to changing environment and increase economic competitiveness in Korea. To give satisfactory results of governmental policy, the requirement to develop the evaluation model to support effective operations of business incubators using the objective and rational criteria is growing. The purpose of this study is to develop evaluation model in Business Incubator using Data Mining Process. We suggested the evaluation model of business incubator, 'Score-5 RS' consists of making evaluation factor process using weighted sum and 5-grade classification and analyzing process by Decision Tree algorithm.

• Environmental Engineering Research
• /
• v.24 no.4
• /
• pp.559-565
• /
• 2019

In order to alleviate the environmental pressure caused by production process of thermal power plants, the application of cleaner production is imperative. To estimate the implementation effects of cleaner production in thermal plants and optimize the strategy duly, it is of great significance to take a comprehensive evaluation for sustainable development. In this paper, a hybrid model that integrated the analytic hierarchy process (AHP) with least squares support vector machine (LSSVM) algorithm optimized by grid search (GS) algorithm is proposed. Based on the establishment of the evaluation index system, AHP is employed to pre-process the data and GS is introduced to optimize the parameters in LSSVM, which can avoid the randomness and inaccuracy of parameters' setting. The results demonstrate that the combined model is able to be employed in the comprehensive evaluation of the cleaner production in the thermal power plants.