• Composites Research
• /
• v.34 no.2
• /
• pp.88-95
• /
• 2021

VARTM (Vacuum-assisted resin transfer molding) process is a low-cost process technology and affiliated with OoA (Out of Autoclave). Besides, it has been widely used in various fields. However, because of its lower quality than the autoclave process, it isn't easy to apply the VARTM process to the aerospace industry, which requires high reliability. The main problem of the VARTM process is the loss of mechanical properties due to the low fiber volume fraction and high void content in comparison to the autoclave. Therefore, many researchers have studied to reduce void and increase fiber volume fraction. This study examines whether the method of controlling atmospheric pressure could increase the fiber volume fraction and reduce void during the resin impregnation process. Reliability evaluation was confirmed by compressive strength test, fiber volume fraction analysis, and optical microscopy. As a result, it was confirmed that increasing the atmospheric pressure step by step in the VARTM process of impregnating the preform with resin effectively increases the fiber volume fraction and reduces void.

• KIPS Transactions on Software and Data Engineering
• /
• v.9 no.12
• /
• pp.403-410
• /
• 2020

In addition to the research on noise removal and super-resolution using the data restoration (Output result) function of Autoencoder, research on the performance improvement of clustering using the dimension reduction function of autoencoder are actively being conducted. The clustering function and data restoration function using Autoencoder have common points that both improve performance through the same learning. Based on these characteristics, this study conducted an experiment to see if the autoencoder model designed to have excellent data recovery performance is superior in clustering performance. Skip connection technique was used to design autoencoder with excellent data recovery performance. The output result performance and clustering performance of both autoencoder model with Skip connection and model without Skip connection were shown as graph and visual extract. The output result performance was increased, but the clustering performance was decreased. This result indicates that the neural network models such as autoencoders are not sure that each layer has learned the characteristics of the data well if the output result is good. Lastly, the performance degradation of clustering was compensated by using both latent code and skip connection. This study is a prior study to solve the Hanja Unicode problem by clustering.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.789-793
• /
• 2021

A lithium secondary battery is the most promising candidate for future energy storage devices. On the other hand, the battery capacity decreases gradually due to the small amount of water and decomposition of the salts during the charging and discharging process, which deteriorates at high temperatures. Many researchers focused on increasing the cycling performance, but there have been few studies on the fundamental problem that removes water and HF molecules. In this study, silane molecules that are capable of absorbing water and HF molecules are introduced to the separator. Firstly, silica-coated amino-silane (APTES, 3-aminopropyltriethoxysilane) was synthesized, then the silica reacted with epoxy-silane, GPTMS ((3-glycidyloxypropyl)trimethoxysilane). A ceramic-coated separator was fabricated using the silane-coated silica, which is coated on porous polyethylene substrates. FT-IR spectroscopy and TEM analysis were performed to examine the chemical composition and the shape of the silane-coated silica. SEM was performed to confirm the ceramic layers. LMO half cells were fabricated to evaluate the cycling performance at 60 ℃. The cells equipped with a GPTMS-silica separator showed stable cycling performance, suggesting that it would be a solution for improving the cycling performance of the Li-ion batteries at high temperatures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.1
• /
• pp.85-91
• /
• 2021

In contrast to standard train tracks, tramlines are often set along public roads, with trams running among pedestrians and other vehicles. In some cities and towns, trams and buses share the same routes and stations. Under the current investment appraisal system, trams are classified into light rail when predicting traffic demand and calculating benefits, but in the case of non-capital areas, it is notable that the origin-destination and transit lines of buses are not provided in the Korea Transport Database distribution data. Due to this problem, it is difficult to reflect proper mode changing behaviors between route buses and trams. This study examines the impact on tramlines of bus routes that are not currently considered in non-capital areas. Following an analysis of the effect of tram projects according to whether bus routes are considered or not, an improvement in methodology is proposed. Through this study, it is expected that the investment appraisal system for the planning of new tramlines will be improved in the future.

• Journal of the Korean Society of Radiology
• /
• v.14 no.7
• /
• pp.891-898
• /
• 2020

As the problem of shields made of lead has recently emerged, research on replacement shields is essential, and studies on the manufacture of diagnostic X-ray shields with 3D printers are also being actively conducted. Recently, with the development of metal mixed filaments, it has become possible to manufacture shielding materials easily, but studies on the nozzle size and output setting of 3D printers are insufficient. Therefore, this study aims to compare and analyze the results through a shielding rate experiment using a brass filament and a 3D printer, outputting the shield according to the nozzle size and layer height, and using a diagnostic radiation generator. The nozzle size was changed to 0.4, 0.8 mm, layer height 0.1, 0.2, 0.3, 0.4 mm, and output. The shielding rate test was fixed at 40 mAs, and the shielding rate was analyzed by experimenting with 60, 80, and 100 kVp, respectively. As a result of the analysis, it was analyzed that the printing time could be reduced to 1/10 according to the nozzle size and the layer height, and the shielding rate could be increased by 1% or more.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.148-159
• /
• 2021

This study focused on searching for optimal locations for general high schools by considering the minimum move distance and the maximum student capacity upon starting a common curriculum based on a high school credit system by taking Seoul as an illustration. The main results were as follows. First, the results from P-median showed that the students' average move distance was below 625m when more than 30% of general high schools offer the common curriculum courses. In addition, the results from MCLP indicated that it was possible to hold all the students. Second, although all the universities located in Seoul open the common curriculum courses, it would not be available to hold all students. On the other hand, when more than 20% of the universities open the courses, MCLP indicated that it was possible to hold the same capacity. In addition, the Office of Education should support moving to the universities offering courses for students affiliated with high schools located in the southeastern area of Seoul and in poor transportation areas. It is expected that by suggesting a problem solving framework regarding space with a spatial optimization method, the study results can be used as a basic data for selecting schools offering common curriculum courses.

• Journal of Digital Convergence
• /
• v.19 no.2
• /
• pp.221-230
• /
• 2021

The study attempts to suggest potential problem and solutions expected in the process of implementing KASS, which is currently under development to improve the domestic navigation safety system, and to summarize improvement effects of domestic navigation safety system anticipated by the implementation of KASS. Challenges expected in the process of implementing KASS exists in four aspects: emotional, technical, cost, safety aspects. When KASS is implemented and operates, various benefits can be realized. Benefits include cost savings by not using navigation safety systems during takeoff and landing; reduction of flight delays and cancellations by removing airway congestion; increase of aircraft accommodation capacity; reduction of carbon emissions; preparation for future aviation demands and improvement of air transportation safety; and reduction of flight accidents. In conclusion, it is expected to enter into an era of more intense competition due to increased aviation demands. In order to survive in this competitive environment, early introduction of KASS is indispensable. Analysis results of this study are expected to provide reference information for academic research in this area. A possible future research topic include a study predicting the changes in the navigation safety systems introduced by KASS and proposing practical and useful ways to respond the changes.

• Journal of Cadastre & Land InformatiX
• /
• v.50 no.2
• /
• pp.237-254
• /
• 2020

Housing vacancies have become a major issue in urban areas, there have been many efforts to address this issue at the national and local levels. The purpose of this paper is to investigate the factors contributing to housing vacancies in old town Incheon in South Korea. In particular, the research focuses on examining the effects of multiple levels of factors on housing vacancies in a comprehensive way; the three levels of factors were identified with a literature review including housing (Level 1), Neighborhood (Level 2), and Region (Level 3). A multi-level logistic regression model was used to examine the relationship between 13 factors in three spatial levels and housing vacancies. As a result, the factors in all three levels were able to explain housing vacancies including site area and shape, proximity to major roads (Level 1), ratio of houses in designated urban renewal area and slope (Level 2), and ratio of the elderly living alone, land price, changes in land price and ratio of new houses (Level 3). These results show that the combination of the physical inferiority of the housing site and the neighborhood environment and the economic and social vulnerability of the region is likely to increases the number of vacant houses. This study also suggested that a multi-dimensional policy strategy is needed to solve the problem of housing vacancies, and urban policies, such as supplying new housing or urban renewal area designation, should be carefully implemented in a way not to create housing vacancies.

• Journal of Korean Elementary Science Education
• /
• v.40 no.1
• /
• pp.22-35
• /
• 2021

In order to investigate the trends in science education research using AR (Augmented Reality) and derive implications for elementary science education, we analyzed 71 research articles on AR application in science education published in both Korea and abroad from 2010 to August 2020. In quantitative aspects, the number of published articles has steadily increased. For domestic researches, the number of papers targeting for elementary school students was higher than that of middle & high school students. In the research method aspects, qualitative methods were most frequently used. In particular, papers regarding the development of AR program and verification of its effectiveness were most frequently published. The researches using mixed method in domestic field were smaller in number than that of the research in abroad. There were similar trends in research targeting elementary school students. In the aspects of the contents, more researches were performed on biology and earth science areas than others. In case of researches for elementary school students, the proportion of researches on biology and earth science was even higher. Domestically the proportion of studies on the convergence of science and non-science subjects was higher than that of foreign studies. The number of researches exploring the effectiveness on 'non-scientific attitude domain', 'cognitive domain', and 'program domain' were relatively higher than that on 'inquiry & practice domain' and 'science-related attitude domain'. For types of AR contents, 'observation manipulation type' was mostly studied, followed by 'experimental activity type', and 'learning guide type'. In case of studies on elementary school students, the ratio of 'observation manipulation type' contents was higher than that of others, whereas studies on 'field problem solving type' were relatively less reported than others. In addition, studies on 'simple interaction' were most frequently reported. Particularly, there were relatively few studies on 'linear and nonlinear interactions' in domestic field. As a result of analyzing key words, we found that the key words related to the characteristics and implementation of AR frequently occurred, and the key words related to elementary education and the merits of AR had many direct connections with other key words.

• 한국노년학
• /
• v.28 no.4
• /
• pp.753-772
• /
• 2008

The purpose of this study is to examine the social gerontology studies in the Journal of the Korean Gerontological Society during 1980-2008 in terms of research topics, research methods, and theoretical trends. A total of 161 studies were analyzed; 27 studies in 1980's, 52 studies in 1990's, and 82 studies in 2000's. The major findings were as follows. First, the research topics were classified into five categories; 1) social change and social system (34 studies), 2) actual socio-condition (62 studies), 3) social problem and deviation (34 studies), 4) social culture (25 studies), and 5) gerontology study and gerontological theory (6 studies), and the major research trends and research results were examined. Second, in research methods, most of studies in 1980's were literature reviews and studies tended to be gradually expanded to quantitative research, but there were only eight quantitative researches. In statistical methods applied to the quantitative researches, thirty-six percent of the researches used basic statistical techniques, sixty-four percent advanced statistical techniques, and the basic ones were gradually replaced by the advanced ones. Third, most of the studies examined the social facts through relevant documents and statistics, or introduced the theories. So, only 12 studies (7.5%) were based on theories. Finally, the studies on various sociological research topics, qualitative studies, longitudinal studies, studies based on theories, and international cooperative studies, inter-disciplinary or multi-disciplinary studies were suggested for the future.