• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.4
• /
• pp.1139-1150
• /
• 2014

This study modified the Parameter-elevation Regression on Independent Slopes Model (PRISM) and investigated the applicability of the modified model (M-PRISM) in estimating $1km{\times}1km$ gridded daily precipitation over South Korea. The model parameters of M-PRISM were estimated by regression curves and were validated using the Jackknife method at the Korean Meteorological Administration (KMA) stations. The results indicate that M-RPISM shows better performance in estimating the frequency of daily precipitation than PRISM while M-PRISM has similar performance to PRISM in estimating the daily precipitation amount. Thus the M-PRISM model proposed in this study can be very useful to estimate high resolution daily precipitation.

• Journal of Information Display
• /
• v.7 no.4
• /
• pp.1-4
• /
• 2006

The optical performances of rounded prism films were investigated using a ray tracing technique. The angular distribution of the luminous intensity was obtained as functions of the prism pitch and the curvature of rounded apex and valley of prism arrays. The gain of the on-axis luminance decreased with decreasing curvature (increasing diameter) and pitch. The existence of the curved area on the prism film decreased the recycling efficiency of the prism film, i.e., the rays which would otherwise have been recycled through total internal reflections via the prism surfaces were refracted on the curved regions and redirected toward directions other than the on-axis direction. Quantitative correlation between the luminance gain and the curvature in addition to the prism pitch was obtained, which might serve as basic data for the optimization of prism films and the manufacturing processes.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.708-715
• /
• 1998

The shelter effect of a porous wind fence on a triangular prism was experimentally investigated in a circulating water channel. A porous fence of porosity .epsilon.=38.5% was installed in front of the prism model. The fence and prism model were embedded in a turbulent boundary layer. The instantaneous velocity fields around the fence and prism model were measured by using the instantaneous velocity fields around the fence and prism model were measured by using the 2-frame PTV(Particle Tracking Velocimetry) system. By installing the fence in front of the prism, the recirculation flow region decreases compared with that of no fence case. The porous fence also decreases the mean velocity, turbulent intensity and turbulent kinetic energy around the prism. Especially, at the top of the prism, the turbulent kinetic energy is about half of that without the fence.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.3
• /
• pp.389-395
• /
• 2006

The fluid force reduction of a square prism having fences on the corner was studied by the measuring the drag and lift acting on the prism and by the visualization experiment of the flow around the prism. The height of the fence was 10% of the square width and the range of Reynolds number considered was from $Re=0.9{\times}104$ to $Re=2.1{\times}104$. The drag of the prism was reduced about 6.8% and the amplitude of the lift was reduced by attaching two normal fences on the rear corners of the prism. In this case, the separated flow at the front corners was reattached on the upper and lower sides of the prism and the vortex streets at the wake region were appeared more slowly than that of the prototype prism.

• Journal of Elementary Mathematics Education in Korea
• /
• v.20 no.3
• /
• pp.393-406
• /
• 2016

In the sixth grade mathematics, drawing of development figures of the triangular prism and the quadrangular prism is recommended in terms of the creativity. In this sense, the teacher has the need to check in advance all the possible development figures of the triangular prism and the quadrangular prism before teaching on them. However, previous studies that currently give all the possible development figures of the triangular prism and the quadrangular prism are hard to find. For this reason, in this paper, as a study of teaching materials for the professional development of elementary school teachers, the method of finding all the possible development figures of the triangular prism and all the possible development figures of the quadrangular prism without omissions and overlaps and the number of each of development figures which can be obtained by that method are discussed. Here lengths of the three sides of base planes of the triangular prism are different each other and lengths of the four sides of base planes of the quadrangular prism are different each other. This discussion is needed in terms of a study of teaching materials in order to prepare for predictable questions to ask the number of the possible development figures of the triangular prism and the number of the possible development figures of the quadrangular prism in classes. In addition, through this discussion, this paper presents the development figures of the triangular prism and the development figures of the quadrangular prism without omissions and overlaps. And teachers can take advantage of them for determining the correctness of the development figures drew by students and guiding students to draw the development figures creatively in actual classes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.3
• /
• pp.205-209
• /
• 2016

The flowfield characteristics of a square prism having a small triangular prism at the upstream side were investigated by visualizing the flow field using PIV. The ratio of the width of the triangular prism to that of the square prism and the gap ratios between the square and triangular prisms were selected as the experimental parameters. The results are summarized as follows. The Strouhal number measured on the wake side of the square prism, which had the same characteristics as the drag reduction rate, increased, and then decreased with the gap ratio for the same width ratio. For a square prism having a small triangular prism, the stagnation regions were represented at the upstream and downstream sides of the square prism. The size of the stagnation region increased with the width ratio at the upstream side of the square prism, and decreased at the downstream side.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.1
• /
• pp.94-100
• /
• 2012

The passive control by vertical splitter plate of fluid force acting on a square prism near a plane wall was studied by measuring of fluid force on the prism and by visualization of the flow field using PIV. The hight of the splitter plate was 10% of the square width. The experimental parameters were the attaching position of vertical splitter plate and the space ratios G/B to the prism height. Time variation of vorticity was most remarkable at 3.0B(B: prism height) position toward wake direction from the center of the prism. The point of inflection of average lift coefficient and Strouhal number on the prism were represented at the space ratio G/B=0.4~0.6 for the prism having vertical splitter plate. The drag of the prism was reduced average 5.0% with the space ratios by attaching the vertical splitter plate at the upper and rear corner on the prism. In this case, the size of the separated region on the upside of the prism was smaller than that of prism having no the splitter plate.

• Journal of Korean Ophthalmic Optics Society
• /
• v.1 no.1
• /
• pp.85-91
• /
• 1996

This is a study of the measurement of inter papillary constance (P.D) in 702 old aged farmers (aged over 45) and the comparision of frame size and distance space of optical center (O.C) from 240 Ready-made Reading spectacles. The average of P.D in male (62.83mm) is greater than in female (61.18mm), and the O.C of Ready-made Reading spectacles of Plastic lens (71.2mm) longer than glass lens (70.8mm). The correction prism power by wearing Reading spectacles in male was 0.7prism to 3.6prism and in female was 0.9prism to 4.4prism. So the prism power in female is greater than in male.

• Korean Journal of Optics and Photonics
• /
• v.5 no.1
• /
• pp.80-83
• /
• 1994

A Littman type dye laser oscillator inserted a wedge prism was constructed. Accurate frequency tuning was achieved by the rotation of the wedge prism instead of the tuning mirror. Frequency tuning rate was about 20 GHz/deg. and the synchronous tuning of 70 GHz without mode-hop was achieved. ieved.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.10-13
• /
• 2015

본 연구에서는 관측지점의 공간분포에 따라 영향반경을 결정하는 M-PRISM(Modified PRISM)을 이용하여 고해상도의 장기 격자자료를 생성하고자 하였다. 장기 기상관측자료를 제공하는 국내 60개 종관기상관측점의 자료를 기반으로 $5km{\times}5km$ 해상도의 일강수량, 일최고 및 일최저기온 등의 자료를 생성하였고 정량적 평가지표를 산정하여 평가하였다. 이와 더불어 일강수량에 대해서는 강수발생빈도를 추정할 수 있는 정성적 평가지표를 산정하고 기존 PRISM과 비교하였다. 정량적 평기지표에서는 두 모형 사이에 뚜렷한 차이를 보이지 않았지만 정성적 평가지표에서는 M-PRISM이 우수한 결과를 나타내었다. 특히 강수 공간분포의 변동성이 큰 호우사상의 경우 M-PRISM이 효용성이 더욱 크게 나타남을 확인할 수 있었다.