Journal of Advanced Marine Engineering and Technology

The Korean Society of Marine Engineering (한국마린엔지니어링학회)
권호 표지
DOI QR코드

DOI QR Code

Investigation of flowfield characteristics of a square prism having a front triangular prism by PIV

PIV에 의한 정면에 삼각주를 가진 정방형주 주위의 유동장 특성분석

  • Ro, Ki-Deok (Department of Mechanical System Engineering.Institute of Marine Engineering, Gyeongsang Nationak University) ;
  • Kim, Jae-Dong (Institute of Marine Engineering)
  • Received : 2015.11.06
  • Accepted : 2016.02.05
  • Published : 2016.03.31
Download PDF
⟨ Previous Next ⟩

Abstract

The flowfield characteristics of a square prism having a small triangular prism at the upstream side were investigated by visualizing the flow field using PIV. The ratio of the width of the triangular prism to that of the square prism and the gap ratios between the square and triangular prisms were selected as the experimental parameters. The results are summarized as follows. The Strouhal number measured on the wake side of the square prism, which had the same characteristics as the drag reduction rate, increased, and then decreased with the gap ratio for the same width ratio. For a square prism having a small triangular prism, the stagnation regions were represented at the upstream and downstream sides of the square prism. The size of the stagnation region increased with the width ratio at the upstream side of the square prism, and decreased at the downstream side.

본 연구는 상류측에 작은 삼각주를 가진 정방형주의 유동장 특성을 정방형주 한 변의 길이에 대한 삼각주의 폭비 및 정방형주 전면에서부터 삼각주 후면까지의 간격을 변수로 하여 PIV를 이용한 가시화실험으로 파악한 것이다. 그 결과를 요약하면 다음과 같다. 정방형주 후류측 스트로할 수는 항력감소율과 같은 특성을 나타내었는데, 간격비가 증가할수록 증가한 후 감소하는 특성을 보였다. 삼각주를 설치한 경우 정방형주 상류측과 하류측에 정체영역이 나타났으며, 그 정체영역의 크기는 정방형주의 상류측은 삼각주의 폭비가 클수록 증가하는데 비해, 하류측은 오히려 감소했다.

Keywords

References

  1. M. Gad-el-Hak, "Modern developments in flow control," Applied Mechchanics, Reviews, vol. 49, no. 7, p. 365, 1996. https://doi.org/10.1115/1.3101931
  2. T. Tamura and T. Miyagi, "The effect of turbulence on aerodynamic forces on a square cylinder with various corner shapes," Journal of Wind Engineering and Industrial Aerodynamics, vol. 83, pp. 135-145, 1999. https://doi.org/10.1016/S0167-6105(99)00067-7
  3. K. D. Ro and K. S. Kim, "Fluid force reduction characteristics of a square prism having fences on the corner," Journal of the Korean Society of Marine Engineering, vol. 30, no. 3, pp. 389-395, 2006 (in Korean).
  4. W. C. Park, "Effect of the length of a splitter plate on drag reduction," Transactions of the Korean Society of Mechanical Engineers B, vol. 17, no. 11, pp. 2809-2815, 1993 (in Korean).
  5. C. J. Doolan, "Flat-Plate interaction with the near wake of a square cylinder," The American Institute of Aeronautics and Astronautics Journal, vol. 47, no. 2 pp. 475-478, 2009. https://doi.org/10.2514/1.40503
  6. K. D. Ro, S. M. Yoon, D. H. Choi, J. H. Kim, and E. C. Sim, "Drag reduction on a square prism using a detached splitter plate," Journal of the Korean Society of Marine Engineering, vol. 36, no. 6, pp. 808-813, 2012 (in Korean). https://doi.org/10.5916/jkosme.2012.36.6.808
  7. K. D. Ro, "Characteristic analysis of flowfield around a square prism having a detached splitter plate using the PIV," Journal of the Korean Society of Marine Engineering, vol. 37, no. 4, pp. 338-343, 2013 (in Korean). https://doi.org/10.5916/jkosme.2013.37.4.338
  8. K. D. Ro, "Characteristic calculation of flowfield around a square prism having a detached splitter plate using vortex method," Journal of the Korean Society of Marine Engineering, vol.3 7, no. 2, pp. 156-162, 2013. https://doi.org/10.5916/jkosme.2013.37.2.156
  9. T. Igarashi, "Drag reduction of a square prism by flow control using a small rod," Journal of Wind Engineering and Industrial Aerodynamics, vol. 69, no. 71, pp. 141-153, 1997.
  10. H. Sakamoto, K. Tan, N. Takeuchi, and H. Haniu, "Suppression of fluid forces actiong on a square prism by passive control," Journal of Fluids Engineering, vol. 119, pp. 506-511, 1997. https://doi.org/10.1115/1.2819273
  11. K. D. Ro, D. B. Jo, Y. J. Yoon, and S. J. Park, "Experiments of flowfield of a square prism having a small vertical plate," Journal of the Korean Society of Marine Engineering, vol. 38, no. 6, pp. 900-908, 2014 (in Korean). https://doi.org/10.5916/jkosme.2014.38.7.900
  12. K. D. Ro, "Characteristics of fluid force reduction of a square prism with a small triangular prism," Journal of the Korean Society of Marine Engineering, vol. 39, no. 3, pp. 338-343, 2015 (in Korean).