• Analytical Science and Technology
• /
• v.8 no.3
• /
• pp.237-248
• /
• 1995

The simultaneous analysis of 16 organic pesticides, which are listed as a part of 129 priority pollutants by EPA(Environmental Protection Agency), was performed by GC-ECD(electron capture detector) and GC/MS-SIM(selected ion monitoring). Two extraction procedures from SW-846, sonication extraction and Soxhlet extraction, were somewhat modified and compared as an extraction and concentration method for the analysis of priority pollutants in soil. Accuracy and precision of the methods were reported from the calculation of mean recovery, mean relative standard deviation, and method detection limit.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.812-822
• /
• 1997

In this paper, we propose an architecture of the asynchronous shared-bus type switch with priority and fairness schemes. The switch architecture is an input and output queueing system, and the priority scheme is implemented in both input and output queues. We analyze packet delay of both input and output queues. In the analysis, we consider to stations with asymmetric arrival rates. Although we make some approximations in the analysis, the numerical results show good agreements with the simulation results.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.1
• /
• pp.10-21
• /
• 2012

As one of the key IT applications, the project management information system (PMIS) played a significant role in construction management processes in Korea. On increasing use of PMIS, regular quality assessment to identify user's requirements of PMIS is necessary. However, there have been rare research efforts for quality assessment for the construction PMIS. This paper aims to propose a priority index of quality improvement for construction PMIS using the importance and satisfaction measures and to verify the discrimination power of the priority index by comparing it with other quality improvement priority index. In addition, this paper discusses some possible ways of PMIS quality improvement. The analysis of quality improvement priority was based on a questionnaire responded by 253 PMIS users (construction managers and constructors). The methods of PMIS improvement were based on the interviews with eight experts. These findings would be the foundation of further researches on PMIS quality improvement. However, more efforts are required to enhance the priority index, in terms of reflecting weighted values of quality assessment factors.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.11
• /
• pp.161-168
• /
• 2017

In this paper, we propose a Software Education Program for the Education Welfare Priority Support students. Elementary school students of education welfare priority support programs has low school satisfaction level and course maturity. Also, they have various problem such as relatively large digital divide when compared to general student. To solve such problem, we designed, developed, and applied a software education program on education welfare priority support program's elementary school students to analyze its effect on their learning motivation, self-efficacy, and goal orientation. Software education program followed the main stages of ADDIE model and was designed into experience Sharing, Requirements analysis, Sharing, Grouping, and Organizing. 20 of 6th graders in education welfare priority support programs were chosen as subject for software education program. The effectiveness has been analyzed through pre, and pro test. As a result of the analysis, we found that the developed software education program has meaningful effect on Learning Motivation, Self-efficacy, and Goal Orientation of education welfare priority support program's elementary students.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.43-48
• /
• 2009

The purpose of the this paper is to make decision of the maintenance priority of power distribution system using Time-Varying Failure Rate(TVFR) with interruption cost. This paper emphasizes the practical use of the reliability indices and interruption cost. To make a decision of maintenance priority on power distribution system equipment, the quantification of the reliability level should be represented as a cost. In this paper, the TVFR of power distribution system equipment applied in this paper utilizes analytic method to use the historical data of KEPCO. From this result, the sensitivity analysis on TVFR of equipment was done for the priority, which represents that high priority of the equipment has more effect on system reliability, such as SAIDI or SAIFI, than other equipment. By this priority, the investment plan is established. In this result, customer interruption cost(CIC) could be extracted, and CIC is used as weighting factor to consider a importance of customer. After that, the result calculated the proposal method in this paper is compared with other priority method, such as lifetime, failure rate or only sensitivity.

• The KIPS Transactions:PartC
• /
• v.8C no.6
• /
• pp.793-805
• /
• 2001

In the recent priority system, high-priority packet will be served first and low-priority packet will be served when there isn\`t any high-priority packet in the system. By the way, even high-priority packet can be blocked by HOL (Head of Line) contention in the input queueing System. Therefore, the whole switching performance can be improved by serving low-priority packet even though high-priority packet is blocked. In this paper, we study the performance of preemptive priority in an input queueing switch for high speed switch system. The analysis of this switching system is taken into account of the influence of priority scheduling and the window scheme for head-of-line contention. We derive queue length distribution, delay and maximum throughput for the switching system based on these control schemes. Because of the service dependencies between inputs, an exact analysis of this switching system is intractable. Consequently, we provide an approximate analysis based on some independence assumption and the flow conservation rule. We use an equivalent queueing system to estimate the service capability seen by each input. In case of the preemptive priority policy without considering a window scheme, we extend the approximation technique used by Chen and Guerin [1] to obtain more accurate results. Moreover, we also propose newly a window scheme that is appropriate for the preemptive priority switching system in view of implementation and operation. It can improve the total system throughput and delay performance of low priority packets. We also analyze this window scheme using an equivalent queueing system and compare the performance results with that without the window scheme. Numerical results are compared with simulations.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.2
• /
• pp.115-135
• /
• 2008

An interesting problem in capacitated supply chains is how to guarantee customer service levels with limited resources. One of the common approaches to solve the problem is differentiating service depending on customer classes. High-priority customers receive a better service at the cost of low-priority customers' service level. One of common criteria to determine a customer's priority in practice is whether he has made a reservation before arrival or not. Customers with a reservation usually receive service based on the time the reservation was made. We examine the effect this advance information of customer arrival has on customer service levels. We show the trade-offs between the leadtime and other system characteristics such as the proportion of high-priority customers. when the service level is high. We also suggest how to differentiate service using the asymptotic ratio of the service levels for both types of customers.

• Journal of the Korean Chemical Society
• /
• v.38 no.3
• /
• pp.246-253
• /
• 1994

The simultaneous analysis of 11 semi-volatile organic acid compound which are listed as priority pollutants by EPA, were performed by GC/MS-SIM(selected ion monitoring). Two extraction procedures, sonication extraction and Soxhlet extraction, were studied as an extraction and concentration method for priority pollutants in soil. Accurecy and precision of the methods were measured by the calculation of mean recovery, mean relative standard deviation, and method detection limit. Finally, limitations and prospects were discussed.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.31 no.3
• /
• pp.58-73
• /
• 2003

It is well known that urban environment affects climate, as we can see in the quality of bio-climate. However, climate has not been recognised properly in the urban planning process. The role it flays needs to be examined for better urban environment. The main objective of this study is to investigate the climate-ecological priority area which produces cold fresh air and thermal induced wind circulation between rural and urban areas. The objective is also to improve the quality of bio-climate and wind circulation at blocked urban areas. This paper uses the measurement and analysis method of wind direction and wind speed in order to investigate the climate-ecological priority area and cold fresh air corridor. In this study, local climate conditions i.e. wind speed, wind direction, temperature, humidity etc., were measured at nine fields and analyzed. On the basis of the climate measurement, the climate ecological priority areas were delineated; These will be assigned as climate-ecological conservation areas.

• Journal of Korean Society for Quality Management
• /
• v.43 no.2
• /
• pp.127-140
• /
• 2015

Purpose: To obtain the area for improvement, the Importance-Performance analysis(IPA) uses relatively simple questions, that is, satisfaction and importance at attribute level. However, no attempt has been made to consider the gap between own company's performance and those of competitors in IPA, in the field of quality management. This study is aimed to suggest a new prioritizing method for improvement and to test for validity of the proposed technique. Methods: This study used data collected from Song and Lim(2015), which is satisfaction of employees, customers and competitors as well as importance data for 7 quality attributes of K animal hospital. A correlation comparison with other priority methods such as Bacon(2003)'s model and Matzler and Hinterhuber(1998)'s QI index is conducted. Results: The priority results by the proposed method shows better in correlation coefficient with customer perceived priority for improvement than other methods. Conclusion: From the result of the current study, it can be concluded that the result of the proposed method is valid, while it is relatively easy to understand and analyze, and therefore no additional survey is necessary for improvement priority.