• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.36C no.3
• /
• pp.26-34
• /
• 1999

A new silicon-based IC interconnect transmission line parameter extraction methodology is presented and experimentally examined. Unlike the PCB or MCM interconnects, a dominant energy propagation mode in the silicon-based IC interconnects is not quasi-TEM but slow wave mode(SWM). The transmission line parameters are extracted taking the silicon substrate effect (i.e., slow wave mode) into account. The capacitances are calculated considering silicon substrate surface as a ground. Whereas the inductances are calculated by using an effective dielectric constant. In order to verify the proposed method, test patterns were designed. Experimental data have agreement within 10%. Further, crosstalk noise simulation shows excellent agreements with the measurements which are performed with high-speed time domain measurement ( i.e., TDR/TDT measurements) for test pattern, while RC model or RLC model without silicon substrate effect show about 20~25% underestimation error.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.940-946
• /
• 2010

In this paper, we proposed the internal antenna on PCB(Planar Circuit Board) for achieving WWAN(Wireless Wide Area Network) operation in the laptop computer. The proposed antenna has a metal structure instead of printed pattern on PCB to improve the antenna characteristics for GSM850/900 bands. Compared to PCB embedded antenna without metal structure, the proposed antenna occupies similar area of $74{\times}11{\times}0.5\;mm^3$ with before and the bandwidth of the proposed one for GSM850/900 bands is increased 13 MHz than before. Further we confirmed that the proposed antenna has higher radiation gain of -4.45~-2.29 dBi for GSM850/900 bands than PCB embedded antenna without metal structure.

• Journal of Fashion Business
• /
• v.20 no.2
• /
• pp.124-133
• /
• 2016

Currently the fashion industry is developing to create a novel culture due to the very sensitive and knowledge-oriented advancement of the IT industry. With fast turnover of information, consumers have come to have a more diverse desire for purchasing. Cubical expression techniques, which empathizes formativeness, can be a creative expression method adjusting into the trend of this era. Along with functional aspects of consumers, even in a textile manufacturing sector, new materials are required to meet sensitive and emotional aspects. Consumers' desire for new and creative designs and the development and adoption of new materials are essential to meet their emotions. The IT industry and fashion industry are forced to combine and a 3D apparel CAD system has been developed, enabling virtual clothing to be represented within a computer virtual space. All processes such as design, pattern creation, sewing and simulation are possible in 3D level. Digital clothing can shorten the production process time and is very effective in that it can reduce clothing waste generated during the sample production. This paper reviewed the works of Dutch designer, Iris van Herpen, who has developed formative designs. She tries to build, construct, and sculpt employing diversified materials other than soft textile materials, as shown in her series of fashion shows. The materials include films, 3D printed polymers, stiff and sheer organza, and artificial leather textiles. A few characteristics of her works have been selected in order to prepare patterns exhibiting the traits. The paper further focused on the physical features of the textile materials used to express similar techniques and its various forms were reviewed.

• The Journal of Advanced Prosthodontics
• /
• v.12 no.4
• /
• pp.218-224
• /
• 2020

PURPOSE. The objectives of this study were to evaluate the fracture strength and fracture patterns of provisional crowns fabricated from different materials and techniques after receiving stress from a simulated oral condition. MATERIALS AND METHODS. A monomethacrylate-based resin (Unifast Trad) and a bis-acryl-based (Protemp 4) resin were used to fabricate provisional crowns using conventional direct technique. A milled monomethacrylate resin (Brylic Solid) and a 3D-printed bis-acrylate resin (Freeprint Temp) were chosen to fabricate provisional crowns using the CAD/CAM process. All cemented provisional crowns (n=10/group) were subjected to thermal cycling (5,000 cycles at 5°-55℃) and cyclic occlusal load (100 N at 4 Hz for 100,000 cycles). Maximum force at fracture was tested using a universal testing machine. RESULTS. Maximum force at fracture (mean ± SD, N) of each group was 657.87 ± 82.84 for Unifast Trad, 1125.94 ± 168.07 for Protemp4, 953.60 ± 58.88 for Brylic Solid, and 1004.19 ± 122.18 for Freeprint Temp. One-way ANOVA with Tamhane post hoc test showed that the fracture strength of Unifast Trad was statistically significantly lower than others (P<.01). No statistically significant difference was noted among other groups. For failure pattern analysis, Unifast Trad and Brylic Solid showed less damage than Protemp 4 and Freeprint Temp groups. CONCLUSION. Provisional crowns fabricated using the CAD/CAM process and the conventionally fabricated bis-acryl resins exhibited significant higher fracture strength compared to conventionally fabricated monomethacrylate resins after the aging regimen. Therefore, CAD/CAM milling and 3D printing of provisional restorations may be good alternatives for long term provisionalization.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1601-1608
• /
• 2010

A scandium(III) porphyrin-based fluoride-selective potentiometric sensor and its application in the analysis of hydrofluoric acid is described. Scandium(III) octaethylporphyrin, an ionophore recently developed for the optical fluoride sensor, was employed as a host molecule for the selective binding with fluoride in the plasticized PVC membrane. Nernstian response for $F^-$ between $10^{-4.6}$ to $10^{-1}$ M was observed at a glycine-phosphate buffer (pH 3.0). The selectivity pattern was observed as $F^-$, salicylate $\gg$ $SCN^-$ > $Cl^-$, $Br^-$, $NO_3{^-}$, $ClO_4{^-}$, which is consistent with the binding constant data measured in the plasticized PVC membrane based on a sandwich membrane method. This highly selective and reversible fluoride-sensitive electrode was employed for the analysis of hydrofluoric acid (HF). A disposable differential-type HF sensor was fabricated on the screen-printed electrode and demonstrated its ability to detect the neutral HF in the acidic solution.

• Journal of Navigation and Port Research
• /
• v.34 no.3
• /
• pp.167-173
• /
• 2010

In order to design small printed antenna restricted within narrow area of $30mm{\times}8mm$ for the Zigbee module and improve its return loss, meander slot antenna with a floating conductor as the parastic element has been proposed. The resonant frequency and bandwidth(VSWR${\leq}$2) of the antenna designed and fabricated in the present study is about 2.44GHz and 113MHz respectively. The radiation pattern is almost similar to that of dipole antenna within the operation frequency range. Also the radiation efficiency and gain of the proposed antenna is more than 60% and 2.7dBi respectively. It has been observed that the characteristics the proposed antenna mentioned above satisfy the specification required of the Zigbee application. In order to validate the proposed antenna, some simulated and measured results are presented and compared.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.3
• /
• pp.35-42
• /
• 2000

A cross-shaped microstripline-fed printed slot antenna having wide bandwidth Is presented in this paper. The proposed antenna is analyzed by using the Finite-Difference Time-Domain (FDTD) method. It was found that the bandwidth of the antenna depends highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The maximum bandwidth of this antenna is from 1.975 GHz to 4.725 GHz, which is approximately 1.3 octave, for the VSWR $\leq$ 2. Experimental data for the return loss and the radiation pattern of the antenna are also presented. and they are in good agreement with the FDTD results.e FDTD results.

• Journal of Intelligence and Information Systems
• /
• v.10 no.3
• /
• pp.1-10
• /
• 2004

In this paper, a new character segmentation algorithm of machine printed character recognition is proposed. The new approach of the proposed character segmentation algorithm overcomes the weak points of both feature-based approaches and recognition-based approaches in character segmentation. This paper defines side profiles of touching characters. The character segmentation algorithm gives a candidate single character in touching characters by side profiles, without any help of character recognizer. It segments touching characters and decides the candidate single character by side profiles. This paper also defines cutting cost, which makes the proposed character segmentation find an optimal segmenting path. The performance of the proposed character segmentation algorithm in this paper has been obtained using a real envelope reader system, which can recognize addresses in U.S. mail pieces and sort the mail pieces. 3359 mail pieces were tested. The improvement was from $68.92\%\;to\;80.08\%$ by the proposed character segmentation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.105-105
• /
• 2006

IT 산업 및 반도체 산업이 발전함에 따라 초소형, 고집적화 시스템의 요구에 대응하기 위해서 고해상도 및 고정밀의 패턴 구현에 관한 많은 연구가 진행되고 있다. 이러한 연구는 각종 산업제품의 PCB(Printed Circuit Board) 및 디스플레이 장치인 PDP(Plasma Display Panel), LCD(Liquid Crystal Display) 등에 적용되어 널리 응용되고 있다. 현재 널리 사용되는 인쇄 회로 기판은 마스킹 후 선택적 에칭 방식을 적용하여 금속 배선을 형성하는 방식을 적용하고 있다. 이러한 방식은 설계가 변경될 경우 마스크를 다시 제작해야 하는 번거로움이 있어 설계 변경이 용이하지 않고 더욱 길어진 생산시간의 증가로 인하여 생산성 및 집적도가 떨어지게 된다. 따라서 최근에는 이러한 한계를 극복하기 위한 방안이 여러 가지 측면에서 시도되고 있으며, 그 중에서도 Inkjet Printing 기술에 대한 관심이 증가하고 있다. 본 연구에서는 Inkjet Printing 방식을 적용하여 금속 배선을 형성하고 선폭과 두께의 오차를 줄여 배선의 Tolerance 를 개선할 수 있는 방안을 제안하였다. Inkjet Printing 방식을 이용한 기존의 금속 배선 형성은 고해상도의 DPI(Dot Per Inch)에서 잉크 액적이 뭉치는 Bulge 현상이 발생되어 원하는 형상 및 배선의 폭을 구현하는데 어려움이 있었다. Bulge 현상은 배선의 불균일성을 야기할 뿐만 아니라 근접한 배선의 간섭에도 영향을 미처 금속 배선의 기능을 할 수 없는 단점을 발생시킨다. 따라서 본 연구에서는 이러한 Bulge 현상을 줄이고 배선간의 간섭을 방지하여 원하는 배선을 용이하게 형성할 수 있는 순차적 인쇄 방식을 적용하였다. 본 연구에서는 노즐직경 35um 의 Inkjet Head 와 나노 Ag 입자 잉크를 사용하여 Glass 표면 위에 배선을 형성하고 배선의 폭과 두께를 측정하였다. 또한 순차적 인쇄 방식을 적용하여 700DPI 이상의 고해상도에서 나타날 수 있는 Bulge 현상이 감소하였음을 관찰하였으며 금속 배선의 Tolerance를 10%내외로 유지할 수 있음을 확인하였다.

• Journal of Applied Reliability
• /
• v.17 no.4
• /
• pp.280-288
• /
• 2017

Purpose: PBA buried in underwater requires high reliability because of its mission critical characteristic and harsh operational environment during its life cycle. Therefore, various reliability improvement activities are necessary. The defect on PBA manufacturing process have been studied, as a result, many activities and standards have been presented. However, there are less studies regarding failure pattern on physical features based on design. In this paper, we studied a possible failure patten based on physical features that is related with manufacturing process of PBA. And reliability improvement design based on PoF (Physical of Failure) were intruduced in this paper. Methods: A reliability prediction simulation were performed on the components A and B of the H system using Sherlock Software which is a PoF commercial tool from DFR solution. Solder fatigue and PTH fatigue analysis based on thermal cycling profiles and random vibration was analyzed on three earthquake response spectrum. Result: It was validated that life time and reliability improvement design through solder fatigue and PTH fatigue analysis in case of component. For compoenet B, random vibration fatigue was additionally analyzed and validated reliability for earthquakes profile. Conclusion: In design stage prior to manufacturing, PoF can be analyzed, and it is possible to make a reliability improvement/validated design using design data. This study can be applied in every design step and contribute to make more stable development product.