• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.579-584
• /
• 2017

The damper oil seal of a high-speed railway vehicle is made from nitrile butadiene rubber (NBR) in order to prevent lubricant from leaking into the damper and to stop harmful contaminants from entering the external environment while in service. Oil leakage through the seal primarily occurs from fatigue failure of the damper. Cumulative damage of the seal occurs due to the contact force between the rod and the rubber during movement due to track irregularities and cants, among other factors. Thus, the design of the oil seal should minimize the maximum principal strain at weak points. In this study, the optimal cross section of the damper oil seal was found using the multi-island genetic algorithm method to improve the durability of the damper. The optimal shape of the oil seal was derived using process automation and design optimization software. Nonlinear material properties for finite element analysis (FEA) of the rubber were determined by Marlow's model. The nonlinear FEA confirmed that the maximum principal strain at the oil leakage point was decreased 24% between the initial design and the optimum design.

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.1
• /
• pp.63-94
• /
• 1990

The purpose of this study was to analyze the displacement and the magnitude and the mode of distribution of the stresses in the lower overdenture, the mucous membrane, the abutment tooth and the mandibular supporting bone when various denture base materials, such as acrylic resin and 0.5mm metal base, and various denture base designs were subjected to different loading schemes. For this study, the two-dimensional finite element method was used. Mandibular arch models, with only canine remaining, were fabricated. In the first denture base design, a space, approximately 1mm thick, was prepared between the denture and the dome abutment. In the second denture base design, contact between the denture and the dome abutment was eliminated except the contact of the occlusal third of the abutment. In order to represent the same physiological condition as the fixed areas of the mandible under loading schemes, the eight nodes which lie at the mandibular angle region, the coronoid process and the mandibular condyle were assumed to be fixed. Each model was loaded with a magnitude of 10 kgs on the first molar region(P1) and 7 kgs on the central incisal region (P2) in a vertical direction. Then the force of 10 kgs was applied distributively from the first premolar to the second molar of each model in a vertical direction(P3). The results were as follows. : 1. When the testing vertical loads were given to the selected points of the overdenture, the overdenture showed the rotatory phenomenon, as well as sinking and the displacements of alveolar ridge, abutment and lower border of mandible under the metal base overdenture were less than those under the acrylic resin overdenture. 2. The maximum principal stresses(the maximum tensile stresses) being considered, high tensile stresses occured at the buccal shelf area, the posterior region of the ridge crest and the anterior border region of the mandibular ramus. 3. The minimum principal stresses(the maximum compressive stresses) being considered, high compressive stresses occured at the inferior and posterior border region of the mandible, the mandibular angle and the posterior border region of the mandibular ramus. 4. The vertical load on the central incisal region(P2) produced higher equivalent stress in the mandible than that on any other region(P1, P3) because of the long lever arm distance from the fixed points to the loading point. 5. Higher equivalent stresses were distributed throughout the metal base overdenture than the resin base overdenture under the same loading condition. 6. The case of occlusal third contact of the abutment to the denture produced higher equivalent stresses in the abutment, the mandibular area around the abutment and the overdenture than the case of a 1mm space between the denture and the abutment. 7. Without regard to overdenture base materials and designs, the amounts and distribution patterns of equivalent stresses under the same loading condition were similar in the mucous membrane.

• Journal of Distribution Science
• /
• v.14 no.3
• /
• pp.63-71
• /
• 2016

Purpose - A variety of indicators are used for the diagnosis of economic situation. However, most indicators explain the past economic situation because of the time difference between the measurement and announcement. This study aims to argue for the resurrection of an idea: electricity demand can be used as an indicator of economic activity. In addition, this study made an endeavor to develop a new Real Business Index(RBI) which could quickly represent the real economic condition based on the sales statistics of industrial and public electricity. Research design, data, and methodology - In this study monthly sales of industrial and public electricity from 2000 to 2015 was investigated to analyze the relationship between the economic condition and the amount of electricity consumption and to develop a new Real Business Index. To formulate the Index, this study followed next three steps. First, we decided the explanatory variables, period, and collected data. Second, after calculating the monthly changes for each variable, standardization and estimating the weighted value were conducted. Third, the computation of RBI finalized the development of empirical model. The principal component analysis was used to evaluate the weighted contribution ratio among 3 sectors and 17 data. Hodrick-Prescott filter analysis was used to verify the robustness of out model. Results - The empirical results are as follows. First, compatibility of the predictability between the new RBI and the existing monthly cycle of coincident composite index was extremely high. Second, two indexes had a high correlation of 0.7156. In addition, Hodrick-Prescott filter analysis demonstrated that two indexed also had accompany relationship. Third, when the changes of two indexes were compared, they were found that the times when the highest and the lowest point happened were similar, which suggested that it is possible to use the new RBI index as a complementing indicator in a sense that the RBI can explain the economic condition almost in real time. Conclusion - A new economic index which can explain the economic condition needs to be developed well and rapidly in a sense that it is useful to determine accurately the current economic condition to establish economic policy and corporate strategy. The salse of electricity has a close relationship with economic conditions because electricity is utilized as a main resource of industrial production. Furthermore, the result of the sales of electricity can be gathered almost in real time. This study applied the econometrics model to the statistics of the sales of industrial and public electricity. In conclusion, the new RBI index was highly related with the existing monthly economic indexes. In addition, the comparison between the RBI index and other indexes demonstrated that the direction of the economic change and the times when the highest and lowest points had happened were almost the same. Therefore, this RBI index can become the supplementary indicator of the official indicators published by Korean Bank or the statistics Korea.

• Journal of Korea Water Resources Association
• /
• v.42 no.2
• /
• pp.149-160
• /
• 2009

The objective of this study is to suggest parameter regionalization scheme which is integrated two multivariate statistical methods: principal components analysis(PCA) and hierarchical cluster analysis(HCA). This technique is to apply semi-distributed rainfall-runoff model on ungauged catchments. 7 catchment characteristics (area, mean altitude, mean slope, ratio of forest, water content at saturation, field capacity and wilting point) are estimated for 109 mid-sized sub-basins. The first two components from PCA results account for 82.11% of the total variance in the dataset. Component 1 is related to the location of the catchments relevant to the altitude and Component 2 is connected with the area of these. 103 ungauged catchments are clustered using HCA as the following 6 groups: Goesan 23, Andong 6, Imha 5, Hapcheon 21, Yongdam 4, Seomjin 44. SWAT model is used to simulate runoff and the parameters of the model on the 6 gauged basins are estimated. The model parameters were regionalized for Soyang, Chungju and Daecheong dam basins which are assumed as ungauged ones. The model efficiency coefficients of the simulated inflows for these three dams were at least 0.8. These results also mean that goodness of fit is high to the observed inflows. This research will contribute to estimate and analyze hydrologic components on the ungauged catchments.

• Journal of Korea Port Economic Association
• /
• v.28 no.1
• /
• pp.159-178
• /
• 2012

Recently, Global network expansion strategy of GTOs(Global Terminal Operator) coupled with each country's port policy, plays huge role for the evolution of modern container port. The Chinese ports can be regarded as the major markets to the GTOs. However, there are scant of researches for finding the key success factors of GTOs' strategies when they consider to invest in overseas. In this respect, the aims of this study were to draw out the evaluation variables for successful investment strategies of GTOs, and to calculate the selected target ports. The 14 variables are selected including the variable named 'development potentiality of a port' through literature reviews. Using the Factor Analysis (FA) based on selected variables, four principal factors were extracted such as 'ability for port operating and cargo generating', 'the trade route and volume', 'the calling potentiality for large vessels' and 'the possibility of utilization of existing infrastructure'. In addition, the weights of factors and variables are evaluated through Fuzzy AHP method. As a result, 'ability for port operating and cargo generating' is chosen as the most important factor among principal factors as scored 0.343, and 'the development potentiality of a port' (0.107) is represented as the most important variable among 14 detailed variables. In overall, from the Global Terminal Operator's point of view, Shanghai is ranked as most suitable port for operating new terminal among the top 5 Chinese ports.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.3
• /
• pp.428-434
• /
• 2010

The spice combinations for substitute of salty taste were developed for reducing sodium intakes in home cooking. The seventeen materials, which have been known as remedy effects for hypertension, were collected and blended based on descriptive sensory evaluation and principal component analysis. Four types of spice combinations such as nutty, umami and salty, hot and sour, and multi attribute were developed as substitutes of salty taste. The developed spice combinations were applied to mackerel meat instead of salt. Consumer acceptance of mackerel meat with spice combinations was analyzed using hedonic nine point scale by 54 panelists. As the sensory evaluation results, the consumer acceptance value of the spice combinations for substitute of salty taste with hot and sour attribute was the highest value as 6.4, whereas that of the salt was 3.1. Also, the fish and rancid flavor were the lower values in the salt free spice blends than those of salt. The spice combinations for substitute of salty taste 5% and NaCl 1%, as a control, were spread on mackerel meat and incubated at $30^{\circ}C$ for 0, 24, and 48 hours. The TBA values of the spice combinations for substitute of salty taste were shown as a half and/or one third values of salt. As the result, the spice combinations for substitute of salty taste with reducing undesirable flavor could be used in home cooking instead of salt.

• Korean Journal of Remote Sensing
• /
• v.15 no.2
• /
• pp.91-105
• /
• 1999

Spatial data integration using multiple geo-based data sets has been regarded as one of the primary GIS application issues. As for this issue, several integration schemes have been developed as the perspectives of mathematical geology or geo-mathematics. However, research-based approaches for statistical/quantitative assessments between integrated layer and input layers are not fully considered yet. Related to this niche point, in this study, spatial data integration using multiple geoscientific data sets by known integration algorithms was primarily performed. For spatial integration by using raster-based GIS functionality, geological, geochemical, geophysical data sets, DEM-driven data sets and remotely sensed imagery data sets from the Ogdong area were utilized for geological thematic mapping related by mineral potential mapping. In addition, statistical/quantitative information extraction with respective to relationships among used data sets and/or between each data set and integrated layer was carried out, with the scope of multiple data fusion and schematic statistical assessment methodology. As for the spatial integration scheme, certainty factor (CF) estimation and principal component analysis (PCA) were applied. However, this study was not aimed at direct comparison of both methodologies; whereas, for the statistical/quantitative assessment between integrated layer and input layers, some statistical methodologies based on contingency table were focused. Especially, for the bias reduction, jackknife technique was also applied in PCA-based spatial integration. Through the statistic analyses with respect to the integration information in this case study, new information for relationships of integrated layer and input layers was extracted. In addition, influence effects of input data sets with respect to integrated layer were assessed. This kind of approach provides a decision-making information in the viewpoint of GIS and is also exploratory data analysis in conjunction with GIS and geoscientific application, especially handing spatial integration or data fusion with complex variable data sets.

• Nutrition Research and Practice
• /
• v.13 no.3
• /
• pp.230-239
• /
• 2019

BACKGROUND/OBJECTIVES: Little is known about the dietary patterns (DPs) of women during pregnancy. The present study aimed to identify the DPs of pregnant Malaysian women and their associations with socio-demographic, obstetric, and anthropometric characteristics. SUBJECTS AND METHODS: This prospective cohort study included 737 participants enrolled in Seremban Cohort Study between 2013 and 2015. Food consumption was assessed using a validated 126-food item semi-quantitative food frequency questionnaire (SFFQ) at four time-points, namely, pre-pregnancy and at each trimester (first, second, and third). Principal component analysis (PCA) was used to identify DPs. RESULTS: Three DPs were identified at each time point and designated DP 1-3 (pre-pregnancy), DP 4-6 (first trimester), DP 7-9 (second trimester) and DP 10-12 (third trimester). DP 1, 4, and 7 appeared to be more prudent diets, characterized by higher intakes of nuts, seeds & legumes, green leafy vegetables, other vegetables, eggs, fruits, and milk & dairy products. DP 2, 5, 8, and 11 had greater loadings of condiments & spices, sugar, spreads & creamer, though DP 2 had additional sweet foods, DP 5 and 8 had additional oils & fats, and DP 11 had additional tea & coffee, respectively. DP 3 and 6 were characterized by high protein (poultry, meat, processed, dairy, eggs, and fish), sugars (mainly as beverages and sweet foods), and energy (bread, cereal & cereal products, rice, noodles & pasta) intakes. DP 9 had additional fruits. However, DP 12 had greater loadings of energy foods (bread, cereal & cereal products, rice, noodles & pasta), sugars (mainly as beverages, and sweet foods), and good protein sources (eggs, nuts, seeds & legumes). Malays were more likely to have lower adherence (LA) for DP 1 and 10 than non-Malays. DP 2, 8, and 11 were more prevalent among Malays than non-Malays. Women with a higher education were more likely to have LA for DP 10, and women with a greater waist circumference at first prenatal visit were more likely to show LA for DP 11. CONCLUSIONS: DPs observed in the present study were substantially different from those reported in Western populations. Information concerning associations between ethnicity, waist circumference and education with specific DPs before and throughout pregnancy could facilitate efforts to promote healthy dietary behavior and the overall health and well-being of pregnant women.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.44-48
• /
• 2015

The equations of hydrocarbon dew points(DT) of the fuel gas mixtures have been derived using the multiple regression analysis. In QSDR(Quantitative Structure Dew-point Relationship), the principal descriptors are CN(average carbon number) and BI(the ratio of the branched isomers). QSDRs studied by changing the pressures of the fuel gas mixtures in the range of 100 kPa ~ 500 kPa are as follows; $$DT(^{\circ}C)=-683.1+1224.98CN-898.01CN^2+308.58CN^3-49.56CN^4+3.02CN^5-12.42BI$$ (at 100 kPa, $$R_{adj}{^2}=0.99$$) (1) $$DT(^{\circ}C)=-745.2+1351.66CN-978.1CN^2+332.7CN^3-52.96CN^4+3.20CN^5-12.84BI$$ (at 200 kPa, $$R_{adj}{^2}=0.99$$) (2) $$DT(^{\circ}C)=-795.4+1457.1CN-1051.1CN^2+357.53CN^3-57.07CN^4+3.46CN^5-13.10BI$$ (at 300 kPa, $$R_{adj}{^2}=0.99$$) (3) $$DT(^{\circ}C)=-868.1+1608.4CN-1156.0CN^2+393.38CN^3-63.06CN^4+3.85CN^5-13.39BI$$ (at 500 kPa, $$R_{adj}{^2}=0.99$$) (4) As the average carbon numbers in the mixed fuel being reduced or the ratio of the branched isomers having a boiling point lower increase, The hydrocarbon dew point becomes lower, The differences between the hydrocarbon-dew points determined by the multiple regression and those calculated by the commercial program, VMGSim are negligible.

• Restorative Dentistry and Endodontics
• /
• v.32 no.1
• /
• pp.69-79
• /
• 2007

The purpose of this study was to investigate the effects of composite resin restorations on the stress distribution of notch shaped noncarious cervical lesion using three-dimensional (3D) finite element analysis (FEA). Extracted maxillary second premolar was scanned serially with Micro-CT (SkyScan1072 ; SkyScan, Aartselaar, Belgium). The 3D images were processed by 3D-DOCTOR (Able Software Co., Lexington, MA, USA). ANSYS (Swanson Analysis Systems, Inc., Houston, USA) was used to mesh and analyze 3D FE model. Notch shaped cavity was filled with hybrid or flowable resin and each restoration was simulated with adhesive layer thickness ($40{\mu}m$) A static load of 500 N was applied on a point load condition at buccal cusp (loading A) and palatal cusp (loading B). The principal stresses in the lesion apex (internal line angle of cavity) and middle vertical wall were analyzed using ANSYS. The results were as follows 1. Under loading A, compressive stress is created in the unrestored and restored cavity. Under loading B, tensile stress is created. And the peak stress concentration is seen at near mesial corner of the cavity under each load condition. 2. Compared to the unrestored cavity, the principal stresses at the cemeto-enamel junction (CEJ) and internal line angle of the cavity were more reduced in the restored cavity on both load con ditions. 3. In teeth restored with hybrid composite, the principal stresses at the CEJ and internal line angle of the cavity were more reduced than flowable resin.