• 열처리공학회지
• /
• 제30권6호
• /
• pp.251-257
• /
• 2017

The effect of annealing temperature on the martensitic transformation behavior, tensile deformation chracteristics and shape recovery etc., has been studied in TiNi based shape memory ribbon fabricated by coldrolling of wire. TiNi based shape memory wire (${\phi}=500{\mu}m$) of which structure is intermetallic compound could be cold-rolled without process annealing up to the reduction rate in thickness of 50%, but a few cracks appear in cold-rolled ribbon in the reduction rate in thickness of 65%. The $B2{\rightarrow}R{\rightarrow}B19^{\prime}$ martensitic transformation or $B2{\rightarrow}B19^{\prime}$ martensitic transformation occurs in annealing conditions dissipating lattice defects introduced by coldrolling. However, in case of higher reduction rate or lower annealing temperature, martensitic transformation in cold-rolled and then annealed ribbons does not occur. The maximum shape recovery rate of cold-rolled ribbons with the reduction rate of 35 and 65% could be achieved at annealing temperatures of 250 and $350^{\circ}C$, respectively. The shape recovery rate seems to be related to the stress level of plateau region on stress-strain curve.

• Journal of Electrical Engineering and Technology
• /
• 제12권4호
• /
• pp.1511-1518
• /
• 2017

Renewable energy hybrid systems look into the process of choosing the finest arrangement of components and their sizing with suitable operation approach to deliver effective, consistent and cost effective energy source. This paper presents hybrid renewable energy system (HRES) solar photovoltaic, downdraft biomass gasifier, and fuel cell based generation system. HRES electrical power to supply the electrical load demand of academic research building sited in $23^{\circ}12^{\prime}N$ latitude and $77^{\circ}24^{\prime}E$ longitude, India. Fuzzy logic programming discover the most effective capital and replacement value on components of HRES. The cause regarding fuzzy logic rule usage on HOMER pro (Hybrid optimization model for multiple energy resources) software program finds the optimum performance of HRES. HRES is designed as well as simulated to average energy demand 56.52 kWh/day with a peak energy demand 4.4 kW. The results shows the fuel cell and battery bank are the most significant modules of the HRES to meet load demand at late night and early morning hours. The total power generation of HRES is 23,794 kWh/year to the supply of the load demand is 20,631 kWh/year with 0% capacity shortage.

• 천문학회보
• /
• 제42권2호
• /
• pp.42.2-42.2
• /
• 2017

The Large Magellanic Cloud (LMC) is a unique target to study the detail structures of molecular clouds and star-forming regions, due to its proximity and face-on orientation from us. Most part of the astrophysical subjects for the LMC have been investigated, but the magnetic field is still veiling despite its role in the evolution of the interstellar medium (ISM) and in the main force to influence the star formation process. Measuring polarization of the background stars behind interstellar medium allows us to describe the existence of magnetic fields through the polarization vector map. In this presentation, I introduce the near-infrared polarimetric results for the $39^{\prime}{\times}69^{\prime}$ field of the northeastern region of the LMC and the N159/N160 star-forming complex therein. The polarimetric observations were conducted at IRSF/SIRPOL 1.4 m telescope. These results allow us to examine both the global geometry of the large-scale magnetic field in the northeastern region and the close structure of the magnetic field in the complex. Prominent patterns of polarization vectors mainly follow dust emission features in the mid-infrared bands, which imply that the large-scale magnetic fields are highly involved in the structure of the dust cloud in the LMC. In addition, local magnetic field structures in the N159/N160 star-forming complex are investigated with the comparison between polarization vectors and molecular cloud emissions, suggesting that the magnetic fields are resulted from the sequential formation history of this complex. I propose that ionizing radiation from massive stellar clusters and the expanding bubble of the ionized gas and dust in this complex probably affect the nascent magnetic field structure.

• 열처리공학회지
• /
• 제5권4호
• /
• pp.201-208
• /
• 1992

An experimental study of the constitutive response of precipitation-strengthened Al-0.55wt% Zr alloy, which consists of an Al matrix precipitation-strengthened by coherent particles, ${\beta}^{\prime}(Al_3Zr)$ with $L1_2$ structure has been performed. The deformation response of the materials has been examined by stress relaxation test at 573K, 623K and 673K. It was found that there exist the threshold stress during stress relaxation and threshold stress results from the presense of ${\beta}^{\prime}(Al_3Zr)$ particles. The ratio of threshold stress and Orowan stress decreased gradually with increasing temperature. The resistance to climb-pass of particles was independent of particles size for a fixed volume fraction although the threshold for bowing and particles cutting are sensitive to the particles dimensions. The smaller particles cutted by dislocations. This behavior of dislocations in this alloy was explained in terms of the small value antiphase boundary energy. The dislocation networks wrere more extensive in spesimens subjected to stress relaxation and there were numerous areas that have a high denstiy of jogged dislocation. This experiment results indicate that the rate controlling stress relaxation process is the climb of edge dislocation over particles.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.479-484
• /
• 2004

Reactions of NO$_{x}$, HO$_{x}$ and $O_3$ chemistry in a diffusion process of the exhaust plume under a stratospheric condition were investigated numerically. Expanding Box method was used to assess the effects of exhaust gases from a stratospheric flight system on $O_3$ depletions. Sensitivity analysis was also performed to identify prime reactions of $O_3$ depletions in an exhaust plume right after the nozzle. In addition, a calculation of reactive flows in stratospheric condition was performed to investigate the characteristics of reactions in a plume. As a result of this study, prime reactions of NO$_{x}$, HO$_{x}$ and $O_3$chemistry in an exhaust plume were identified, and fundamental behavior of chemical species were examined in a exhaust plume.t plume.

• 펄프종이기술
• /
• 제36권3호
• /
• pp.35-43
• /
• 2004

Reduction of fresh water consumption and effluent discharge provide diverse advantages in raw materials and energy savings. Papermaking system closure, however, reduces the efficiency of additives, decreases retention and dewatering, and causes many other Problems in papermaking. Accumulation of inorganic and organic substances in the process white water is the prime cause of these problems. Understanding of the accumulation phenomena of the detrimental substances in the papermaking process is of great importance for papermaking system closure. In this study a process simulation method was employed to analyze the accumulation phenomena of anionic starch in the process white water as the reuse rate of dry broke and pick up of surface sizing agent is increased. Steady state simulation studies were carried out based on the model developed in previous study. The variation of dissolved starch concentration in each process unit was monitored as a function of reuse rate of dry broke and surface sizing agent pick up rate. The result showed that dissolved starch concentration Increased as reuse rate of dry broke and surface sizing agent pick up rate was increased.

• 정보처리학회논문지D
• /
• 제15D권6호
• /
• pp.741-754
• /
• 2008

지속적으로 확장되는 데이터 스트림에 대한 데이터 마이닝 수행과정에서는 메모리 사용량을 가용한 범위 내로 제한하는 것이 중요한 요소이다. 본 논문에서는 데이터 스트림 환경에서 한정된 메모리 공간을 이용하여 빈발 항목집합을 탐색하는데 효과적인 프라임 패턴 트리(Prime pattern tree: PPT)구조를 제안한다. 프라임 패턴 트리는 기존의 전위 트리 구조와 비교하여 항목집합들을 하나의 노드로 관리함으로써 트리의 크기를 크게 줄일 수 있는 장점이 있다. 또한, 전지 임계값 $S_{\delta}$에 따라 노드를 병합하거나 분리하여 동적으로 트리의 크기와 결과 집합의 정확도를 마이닝 수행 중에 조절 할 수 있다. $S_{\delta}$값이 크면 한 노드에서 관리되는 항목집합의 수가 증가하게 되고, 출현 빈도수를 추정해야 하기 때문에, $S_{\delta}$값이 작을수록 결과집합의 정확도가 높다. 이처럼 PPT에는 트리의 크기와 정확도의 trade-off 가 존재한다. PPT의 이러한 특성에 기반하여, 데이터 스트림에서 갑자기 데이터 집합에 변화가 생겨 빈발항목이 될 가능성이 높은 항목들이 많이 출현하는 경우에도 마이닝을 지속적으로 수행할 수 있도록 지원한다. 본 논문에서는 프라임 패턴 트리를 이전 연구에서 제안한 데이터 스트림에서 최근 빈발 항목 탐색 방법인 estDec 방법에 적용하여 한정된 작은 양의 메모리 공간을 이용하여 온라인 데이터 스트림에서 빈발항목을 탐색하는 방법을 제시한다. 또한, 가용 메모리 범위에서 최적의 메모리를 사용하여 최적의 마이닝 결과를 얻을 수 있도록 하는 메모리 사용량에 대한 적응적 방법을 제시한다. 끝으로, 여러 실험을 통한 효율성 검증을 통해 제안된 방법의 여러 특성을 확인한다.

• KIEAE Journal
• /
• 제11권4호
• /
• pp.79-85
• /
• 2011

Landscaping on building sites has been regulated by Building Code in Korea. By Article 42 of the Code, landscaping is mandated in the process of building construction and people should comply with the code to get the building permit. On the other hand, sustainability tends to be a prime value these days. Because of the intrinsic nature of Korea Building Code, the landscaping was not adequately implemented in reality. After studies on the landscape ordinance, the major problems on the mandated landscaping has been speculated as follows: 1. As far as landscaping has been regulated by single building code, there seems to be a limitation. Urban Planning Code etc. would be another mean to adequate landscaping. 2. Speculations on landscape details associated with landscape plans are needed for building permit process. 3. By any level of law, the landscape should be reinforced for public buildings and developments because of its own publicity. 4. Locally sound landscape would be implemented through Special Architectural District etc.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.235-240
• /
• 2001

This study presents experimental work on phase change heat transfer, in order to increase heat transfer rate, ultrasonic vibrations were introduced. Solid-liquid phase change occurs in a number of situations of practical interest. This study reveal that ultrasonic vibrations accompany the effects like agitation, acoustic streaming, cavitation, and oscillating fluid motion. Such effects are a prime mechanism in the overall melting process when ultrasonic vibrations are applied. Some common examples include the melting of edible oil, metallurgical process such as casting and welding, and materials science applications such as crystal growth. Therefore, this study presented the effective way to enhance phase change heat transfer.

• 한국터널지하공간학회 논문집
• /
• 제17권6호
• /
• pp.615-621
• /
• 2015

In this paper diamond wire cutting method has been proposed to cut the rock in the tunnel face. Diamond wire saw method could cut the rock from tunnel face with very minor vibration and noise. In this study rock cutting process has been simulated with FEM method by using LS-DYNA explicit non-linear finite element code. Normal load act as an prime factor when cutting the rock surface. For observing the effect of normal load on bead, several experiments has been conducted by varying normal loads on the bead. From each experiment, cutting rate has been calculated to compare the cutting rate with different load conditions. By increasing the normal load on bead, cutting rate increases drastically.