• 제목/요약/키워드: pressure bomb

검색결과 61건 처리시간 0.024초

전기-기계식 점화안전장치 개발 (Development of Electro-Mechanical Ignition Safety Device)

  • 장승교;강호준
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2011년도 제37회 추계학술대회논문집
    • /
    • pp.332-335
    • /
    • 2011
  • 고체 로켓 추진기관에 적용 가능한 전기-기계식 점화안전장치를 설계하고 제작하였다. 본 전기-기계식 점화안전장치는 로터리 솔레노이드를 이용하여 장전되고 내장된 전기식 착화기를 발화하여 점화 에너지를 발생시킨다. 점화안전장치의 점화 성능을 검증하기 위한 방법으로 10-cc 밀폐용기 시험(Closed Bomb Test)을 실시하였고 점화안전장치 작동시 발생되는 고온, 고압의 가스로 인하여 밀폐용기 내부에 형성되는 압력을 계측하였다.

  • PDF

CBT를 이용한 고체 추진제의 연소효율 도출 방법과 그레인 형상의 영향 분석 (Combustion Efficiency Estimation Method of Solid Propellants and the Effects of Grain Shape using Closed Bomb Test)

  • 박종근;성홍계;이원민;김은미
    • 한국추진공학회지
    • /
    • 제26권6호
    • /
    • pp.53-61
    • /
    • 2022
  • 본 연구에서는 CBT(Closed Bomb Test)시험을 통하여 고체추진제의 연소효율을 추정하는 방법을 제시하였다. CBT는 수백 기압에서 작동하므로 실기체의 영향을 고려하기 위해 Noble-Abel 상태방정식을 적용하였다. 또한 밀폐용기 벽면으로 발생하는 열손실을 고려하였다. 그레인의 연소로 인한 그레인의 체적 변화율 계산은 형상 함수(Form Function)를 적용하였으며, 총 8개의 다른 형태 그레인의 연소 효율을 도출하였다. 본 연구에서 제시한 이론모델의 적절성을 실험 결과인 압력-시간 선도와 비교하여 나타내었다. 그레인 형상과 추진제의 충진량에 따른 연소효율을 도출하였다.

정용연소기에 있어서 어유의 연소특성 (Combustion Characteristics of Fish Oil in a Constant Volume Combustion Bomb)

  • 서정주
    • 수산해양기술연구
    • /
    • 제28권2호
    • /
    • pp.184-190
    • /
    • 1992
  • The combustion characteristics, ignition delay, p-t, dp/dt, Q-t of diesel oil and fish oil blended diesel oils was investigated according to pressure and temperature in a constant volume combustion bomb. The results are as follows: 1) The influence of temperature and pressure on the ignition delay was almost constant in high temperature, regardless of the blending rates, and the ignition delay was shortest in the 60% blend. 2) The maximum pressure was high in order of with pure diesel oil, with the 20% blend and the 60% blend. 3) The rate of pressure rise was high in order of with pure diesel oil, with the 20% blend and the 60% blend. The rate of maximum pressure rise was significantly higher with pure diesel oil than with two blends. 4) The amount of accumulative heat release was large in order of with pure diesel oil, with the 20% blend and the 60% blend.

  • PDF

CNG 직접분사식 연소기에서의 열량해석(2) : 비균질급기 (Analysis of Heat Quantity in CNG Direct Injection Bomb(2) : Inhomogeneous Charge)

  • 최승환;전충환;장영준
    • 한국자동차공학회논문집
    • /
    • 제12권2호
    • /
    • pp.24-31
    • /
    • 2004
  • A cylindrical constant volume combustion bomb is used to investigate the combustion characteristics and to analyzer the heat quantity of inhomogeneous charge methane-air mixture. To analyze the heat quantity, some definitions including the CHR ratio, the UHC ratio and the HL ratio are needed and are calculated. It is shown that the effect of stratification is not significant in case of the overall excess air ratio of 1.1, mainly due to the higher heat loss and lower thermal efficiency compared to those of homogeneous condition. In the case of the overall excess air ratio of 1.4, as the initial charge pressure decreases, the CHR ratio has been decreased while the HL ratio has been increased, Generally, as the initial charge pressure increases, the amount of injection mixture has been decreased and has resulted in lower mean velocity and turbulence intensity for injection mixture. Also, the injected mixture is too rich to result in mixing deficiency in combustion chamber. From these results, it could be possible to acquire the improvement of thermal efficiency and the reduction of heat loss simultaneously through the 2-stage injection in CNG direct injection engine.

고압에서 작동하는 고체 추진제 연소속도 추정 방법 (Burning Rate Estimate Method of Solid Propellants at High Pressure Condition)

  • 최한영;이동선;성홍계;이원민;김은미
    • 한국추진공학회지
    • /
    • 제26권1호
    • /
    • pp.28-37
    • /
    • 2022
  • 밀폐용기(Closed Bomb)시험을 통해 고압에서 작동하는 고체 추진제의 연소속도를 추정하는 방법을 연구하였다. CEA를 이용하여 연소가스의 조성을 계산였으며 밀폐용기 내부의 고온, 고압의 환경을 묘사하기 위해 Noble-Abel 상태방정식을 적용하였다. 분자의 부피를 고려한 분자 간의 충돌을 묘사하는 인자인 Covolume을 분자의 LJ potential을 이용하여 모델링하였다. 또한 추진제의 부피 변화율을 고려하기 위해 3차 형상함수(Cubic form function)를 적용하였다. 각 모델을 사용하여 고압용기에서 측정된 5개의 압력-시간 선도로부터 연소속도를 계산하고 이를 BRLCB 결과와 비교 검증하였다. 각 실험에서 약 6% 이내의 최대 오차를 갖는 연소속도를 추정함으로써 초고압 환경에서의 연소속도 추정 방법을 정립하였다.

압력용기 산분해법과 테플론 바이알에서의 산분해법이 미량원소의 함량측정에 미치는 영향 (Effect on the Measurement of Trace Element by Pressure Bomb and Conventional Teflon Vial Methods in the Digestion Technique)

  • 이승구;김태훈;;이승렬;이종익
    • 암석학회지
    • /
    • 제25권2호
    • /
    • pp.107-119
    • /
    • 2016
  • 화성암의 성인을 밝혀내는데 있어서 중요한 기초자료로서 지구화학적으로 중요한 의미를 가지는 미량원소의 함량은 대개는 암석가루의 산분해법에 의해 준비된 용액과 유도결합 플라즈마 질량분석기(ICP-MS)를 이용하여 측정한다. 이 때 암석가루의 산분해에는 일반적으로 테플론 바이알 혹은 압력용기를 이용한다. 이 논문에서는 미국지질조사소의 암석 표준시료인 BCR2, GSP2를 이용한 압력용기 혹은 테플론 바이알 산분해법 실험과정에서 발생될 수 있는 특정 미량원소의 손실 가능성에 대해 조사하였다. 실험결과, BCR2에서는 Cr, Ni, Zn, Ta, W의 변화가 제일 심했고, GSP2에서는 Rb, Sr, Zr, Hf, Ta, W 등에서 추천값(참고값)과 큰 차이를 보여주었다. 산분해 실험에 의한 화성암류내 W의 함량측정은 많은 주의가 필요하며, 이외에도 현무암류에서는 Cr과 Ni의 측정값에, 화강암류에서는 Zr, Hf, Ta의 측정값에 주의가 필요하다는 것을 확인할 수가 있었다.

항공기 장착 무장의 투하 안정성 검증을 위한 지상무장분리시험 (Ground Ejection Tests to verify the Safe Separation of an Aircraft Mounted Store)

  • 이종홍;최석민;이민형;이철;정재원
    • 한국항행학회논문지
    • /
    • 제22권2호
    • /
    • pp.70-75
    • /
    • 2018
  • 항공기에 장착하는 무장은 실제 항공기에 장착하기 전에 안전 분리가 이루어졌음을 검증하기 위해 지상에서 무장분리시험을 실시해야 한다. 본 연구에서는 더미유도탄으로 지상에서투하 안정성을 검증하기 위한 지상무장분리시험을 실시하였다. 지상무장분리시험의 필수장비인 무장분리장치는 공압으로 동작하며 압력이 크고, 오리피스 직경이 클수록 유도탄을 밀어내는 사출력이 크게 발생한다. 무장분리장치의 봄베 압력과 오리피스 직경을 변경하여 더미유도탄의 투하 움직임을 고속카메라로 계측하였고 투하변위, 투하속도를 분석하였다. 실제 비행하는 항공기에서 무장 투하 해석시 기초 데이터를 제공할 수 있고, 추후 개발되는 항공기 무장의 지상무장분리시험 수행시 유용할 것으로 생각한다.

VOF와 FSI 방법을 적용한 CBT 연소 정밀 모델링 및 해석 (CBT Combustion Precise Modeling and Analysis Using VOF and FSI Methods)

  • 강정석;박종근;성홍계
    • 한국추진공학회지
    • /
    • 제26권5호
    • /
    • pp.35-43
    • /
    • 2022
  • 본 연구에서는 고체추진제를 사용하는 closed bomb test(CBT)의 연소에 대한 정밀 모델링 및 해석을 수행하였다. 기상과 고상을 동시에 해석하기 위해 fluid structure interaction(FSI) 기법을 사용하였으며 기체상과 그레인의 연소해석은 Eulerian 방법을, 그레인의 이동은 Lagrangian 방법을 적용하였다. 고체상의 그레인과 연소가스의 상호 작용은 소스텀을 통해 완전 결합(fully coupled) 되도록 하였다. 그레인의 연소거리와 연소면의 이동을 모사하기 위하여 volume of fluid(VOF) 방법을 사용하였고, 그레인에 작용하는 힘은 그레인 연소면에 작용하는 압력과 중력을 고려하고, VOF의 속도항에 그레인 연소속도와 그레인 이동속도를 고려하였다. 개발한 수치모델을 바탕으로 1개와 3개 그레인에 대한 연소해석을 수행하여 실험결과와 비교 검증하였다. 연소시에 나타나는 압력 섭동에 대한 음향장을 분석하였다.

가솔린.메탄의 연소특성 비교 (Comparison of the Combustion Characteristics of Methane-Air and Gasoline-Air Mixtures)

  • 박명호
    • 한국분무공학회지
    • /
    • 제7권3호
    • /
    • pp.7-11
    • /
    • 2002
  • Comparison of the combustion characteristics of methane-air and gasoline-air mixtures has been conducted experimentally by a spherical bomb technique. The results indicate 1) the burning velocity of gasoline is slightly higher than that of methane, but their basic behavior of combustion characteristics, positive dependence on temperature and negative one on pressure, are the same, and 2) 20 vol.% addition of hydrogen to methane enhances the burning velocity by about 30%, but does not come to reverse the tendency of pressure dependence to that of pure hydrogen.

  • PDF

디젤연소용기에 직접분사된 천연가스와 파일럿오일의 복합연소 모델링 (Modeling the Dual-Fuel Combustion of Natural Gas and Pilot Distillate Injected Directly into a Diesel Combustion Bomb)

  • 최인수
    • 한국자동차공학회논문집
    • /
    • 제4권1호
    • /
    • pp.155-164
    • /
    • 1996
  • Dual-fuel engines are being researched with emphasis on the possible types of natural gas supply systems. Hence, a three-dimensional combustion model by using finite volume method was developed to provide a fundamental understanding of the auto-ignition of pilot distillate and subsequent burning of natural gas, when the natural gas as well as the distillate was directly injected into a quiescent diesel engine like combustion bomb tests and the numerical results were investigated for the mixed combustion phenomena. With high-pressure natural gas injection, it was found that the gaseous fuel injection characteristics had to be well harmonised with that of the pilot distillate. For better combustion efficiency, however, further researches are required for the optimisation of injection system in the existence of air motion.

  • PDF