• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 C
• /
• pp.1195-1198
• /
• 1999

This paper presents optimal placement of minimal set of phasor measurement units(PMU's) and observability of measurement system with PMU. By using the incidence matrix symbolic method which directly assigns measurement and pseudo-measurement to incidence matrix, it is much simpler and easier to analyze observability. The optimal PMU set is found through the simulated-annealing(SA) and the direct combinational method. The cooling schedule parameter which is suitable to the property of problem to solve is specified and optimal placement is proven by presented direct combinational method. Search spaces are limited within reasonable feasible solution region to reduce a unnecessary one in the SA implementation based on global search. The proposed method presents to save CPU time and estimate state vectors based on optimal PMU set.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.137-137
• /
• 2010

This research proposed an advanced Electronic bead (EB) using MMA (Methy methacrylate) and CCA (Charge Control Agent). In the first, this paper presents about measurement method and characterization analysis of EB with wet coating method. Furthermore, this work presents the positive and negative EB fabrication procedure. As the experimental results, the proposed EB with charge to ratio[Q/M] is very attractive to Electronic paper driving characterization.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.142-142
• /
• 2010

This research proposed an advanced Electronic bead (EB) using MMA (Methy methacrylate) and CCA (Charge Control Agent). In the first, this paper presents about measurement method and characterization analysis of EB and nano-silica with pulse waveform in aging. Furthermore; this work presents the positive and negative EB fabrication procedure. As the experimental results, the proposed EB with square waveform is very attractive to Electronic paper driving characterization.

• 전기전자학회논문지
• /
• 제2권2호
• /
• pp.247-254
• /
• 1998

This paper presents a performance study of two LU decomposition algorithms on two massively parallel SIMD machines: the 16K processor MasPar MP-1 and the 4K processor MasPar MP-2. The paper presents experimental results and an analysis of the algorithms to explain the results. While the blocked and the nonblocked algorithms for LU decomposition have been studied individually by others, we compare the two algorithms and identify the tradeoffs between them. Our analysis of the blocked algorithm shows how the block size affects the interprocessor communication cost and the memory read/write overhead. The analysis in this paper is useful to determine an optimum block size for the blocked algorithm.

• 한국기계가공학회지
• /
• 제8권1호
• /
• pp.48-56
• /
• 2009

This paper presents the results of miniaturized micro milling machine tool development for micro precision machining process. Finite element analysis has been performed to know the relationship between design dimensional variables and structural stiffness in terms of static, dynamic, thermal aspects. Design optimization has been performed to optimize the design variables of micro machine tool to minimize the volume, weight and deformation of machine tool structure and to maximize the stiffness in terms of static, dynamic, and thermal characteristics. This study presents the assessment of the technology incentive for the minimization of machine tool in the quantitative context of static, dynamic stiffness, thermal resistance and thus the accuracy implications. This study can also be provided a basic knowledge for further research of micro factory development.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.594-597
• /
• 2001

As many industrial systems become more complex, they become extremely difficult to diagnose the cause of failures. The subject of this paper is ECCS(Emergency Core Cooling System) part of PWR(Pressurized Water Reactor). This paper presents modeling and diagnoser construction of ECCS based on discrete event system theory. Also, this paper presents that the ECCS system is diagnosible in our approach.

• Journal of Mechanical Science and Technology
• /
• 제15권12호
• /
• pp.1609-1615
• /
• 2001

This paper presents the characteristics of a general structured observer and presents an estimation algorithm for a system with external disturbances which are added to the input of the system. By using a disturbance model, the general structured observer can estimate the states of the system is spite of disturbances, where the system is affected from external disturbances. Also, the general structured observer can include the function of a PI observer or high gain observer by properly adjusting the observer's gain matrices. The existence condition for the observer is derived, which can be checked by the system's observability condition and the pole-zero cancellation of the system's polynomial matrix. Through a numerical example, it is verified that the proposed observer is effective estimating the system and the input disturbance.

• 대한후두음성언어의학회지
• /
• 제9권2호
• /
• pp.156-159
• /
• 1998

Hypopharyngeal carcinoma is an aggressive malignancy that usually presents at a late stage, thereby resulting in an overall poor prognosis fir these unfortunate patients. The most effective treatment of pyriform sinus carcinoma combines surgery and radiation. Total laryngopharyngectomy is necessary in advanced tumors, but may not be appropriate in limited lesions. Therefore several procedure for partial laryngopharyngectomy have been proposed. Supracricoid hemilaryngopharyngectomy is the one of these procedure. This report presents one case of supracricoid hemilaryngopharyngectomy in a patient with pyriform sinus medial wall cancer and analyses aerodynamic study before and after operation.

• Structural Engineering and Mechanics
• /
• 제5권3호
• /
• pp.221-237
• /
• 1997

This paper presents a new uniaxial material model for rate-sensitive analysis addressing both the transient and steady-state responses. The new model adopts visco-plastic theory for the rate-sensitive response, and employs a three-parameter representation of the overstress as a function of the strain-rate. The third parameter is introduced in the new model to control its transient response characteristics, and to provide flexibility in fitting test data on the variation of overstress with strain-rate. Since the governing visco-plastic differential equation cannot be integrated analytically due to its inherent nonlinearity, a new single-step numerical integration procedure is proposed, which leads to high levels of accuracy almost independent of the size of the integration time-step. The new model is implemented within the nonlinear analysis program ADAPTIC, which is used to provide several verification examples and comparison with other experimental and numerical results. The companion paper extends the three-parameter model to trilinear static stress-strain relationships for steel and concrete, and presents application examples of the proposed models.

• 한국CDE학회논문집
• /
• 제3권2호
• /
• pp.87-102
• /
• 1998

Given a sequence of cross-sectional curves, the skinning method generates a freeform surface that interpolates the given curves in that sequence. This thesis presents a construction method of a B-spline skinning surface that is fair and satisfies volume constraints. The fairness metric is based on the parametric energy functional of a surface. The degrees of freedom in surface control are closely related lo control points in the skinning direction. The algorithm fur finding a skinning surface consists of two step. In the first step, an initial fair surface is generated without volume constraints and one coordinate of each control point is fixed. In the second step, a final surface that meets all constraints is constucted by rearranging the other coordinates of each control point that defines the initial surface A variational Lagrange optimization method produces a system of nonlinear equations, which can be solved numerically. Moreover, the reparametrization of given sectional curves is important for the construction of a reasonable skinning surface. This thesis also presents an intuitive metric for reparametrization and gives some examples that are optimized with respect to that metric.