• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.199-222
• /
• 2022

It has been 100 years since the excavation of Geumgwanchong (Gold Crown Tomb), a tomb that was accidentally discovered in Noseo-ri, Gyeongju at the end of September 1921 during Japanese colonial rule. Although it is known for its discovery, not only in the Korean Peninsula but also in Asia and beyond, the excavation report was published in Japanese and English by the Government-General of Korea in 1924 and 1928, three years after the excavation. TOMB "KINKANTSUKA" or THE GOLD CROWN TOMB at KEISHU, AND ITS TREASURES) was published as a series of books and picture books. The excavation report was prepared by Kosaku Hamada (濱田耕作), who was a member of the Ruins Investigation Committee of the Japanese Government-General of Korea (later became the President of Kyoto Imperial University, Kyoto, Japan), and Sueji Umehara (梅原末治), who was commissioned to investigate the remains of the Japanese Government-General of Korea. In this paper, the preface was written in July 1922, about half a year after the excavation of tombs, which was much earlier than the official reports, in the 'Korean and Chinese reading book (稿本 高等朝鮮語及漢文讀本 巻五)' by Hamada Kosaku (濱田耕作) for high school students in Korea, which was titled 'New Excavated Artifacts in Gyeongju (慶州의 新發掘品)' with a subtitle '絶大의 發見', a slightly awkward expression in Korean, but it means 'a very big discovery'. The meaning has been introduced as a single unit, emphasizing its significance in terms of the achievements of the excavation of Geumgwanchong, academic and archaeological discoveries, and cultural history in Korean language rather than Japanese language. Since the manuscript was written immediately after the excavation, the excitement as an archaeological researcher at the time of the excavation and expectations for future research can be read as it is. In this paper, I would like to introduce the voice of the excited field leader of the Japanese Government-General of Korea after the excavation of Geumgwanchong in 2022, the 100th anniversary of the writing. In addition, the process from the discovery of the tomb to the preparation of the report was summarized in one chronological table to make it easier to understand the series of flows.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.40 no.1
• /
• pp.65-73
• /
• 2022

This paper analyzed the characteristics of ancient villages in Hongcun and the method of resetting the preservation area for the preservation of the changed historical and cultural space in Hongcun through the process of change. To this end, the current status of preservation areas and utilization areas in the village was identified through ancient documents, old paintings, policy materials, and interviews related to the village, and through this, the problem of resetting the preservation area was examined. As a result, the following conclusions were drawn. First, Hongcun is a village built under the influence of Confucianism, Buddhism, and Taoism, and the spatial organization was created according to the hierarchy of Confucianism. As a result, it was possible to inherit and preserve the heritage of ancestors even though the central government did not preserve it. Second, the concept of preservation in a limited sense has been applied as Hongcun has been recognized as a cultural heritage that has been passed down since ancient times, but the Great Leap Forward and the Cultural Revolution brought about changes in the village space. Since then, ancient buildings, water systems, and forests have been preserved through regulations on new construction and expansion of a building with the Hongchon preservation plan, but the development within the preservation area is underway due to changes in the lives of original inhabitants, which were followed by continued development pressure and reform and opening. Third, the original inhabitant of ancient villages had a high perception of the value of the heritage, but they demanded the preparation of measures to improve living conditions and create profits, and the active use of villages for this. Fourth, the forest consisting of old trees is being restored, but the gardens in the old house are showing a phenomenon that the garden space is reduced or transformed for use. The bridges and parking lots were newly built in the southern area, which was extended from the western area, the original entrance to the ancient village, resulting in changes in the existing entrance. This was found to be the primary cause of the spatial change of the ancient village, as the road system was modified to make it convenient for tourists to enter and exit. Fifth, the existing preservation area should be reset and preserved by resetting the preservation route centered on Wolso(half Moon Pool), while the surrounding area should be set as a direct and indirect experience space, and according to the hierarchy of each space, the utilization should proceed while the preservation is carried out by crossing the preservation and the utilization.

• Journal of Environmental Impact Assessment
• /
• v.31 no.4
• /
• pp.226-240
• /
• 2022

Local governments over a certain size in Republic of Korea may conduct Environmental Impact Assessment (EIA) considering regional characteristics if it is necessary, in accordance with Article 42 of the 「Environmental Impact Assessment Act」. However, it was investigated that the number of local government EIA operation in many local governments was less than initial expectations. In order to improve it, the status of ordinances and consultation guidelines which are different for each local government need to be compared, and the institutional issues forthe relevant local governments must be found considering regional characteristics. Furthermore, detailed regulation and guidance on the local government EIA procedure should be included in the consultation guidelines and related information need to be provided. In this study, focusing on the case of Incheon Metropolitan City, the status of local government EIA ordinances in metropolitan cities and provinces with a similar condition was investigated, and the types and scope of target projects were compared and analyzed. In addition, consultation guidelines forIncheon Metropolitan City were written, and improvements on the procedure flow and overall schedule designation derived from the process were presented. In the case of Incheon Metropolitan City, there were no detailed information officially announced regarding the regulations of the local government EIA ordinance and follow-up management, so the administrative system of the local government needed to be reinforced in this field. Meanwhile, considering the status of local environment and geography, some target project types were deemed necessary to be added: port construction projects, water resource development projects, railroad construction projects, and military facilities installation projects. The results of this study will provide useful information to local governments which want to improve their operation effectiveness by reorganizing the local government EIA system and preparing specific guidelines.

• Journal of Appropriate Technology
• /
• v.6 no.1
• /
• pp.28-36
• /
• 2020

Sustainable appropriate technology requires user-centered design with consideration of the political, cultural and environmental aspects of the area. However, in the preparation of appropriate technology, there is a limit to the prior grasp of the user's intention and experience leading to the actual behavior of the user after the dissemination. As a result, appropriate technologies are often inconvenient for practical use or used for other purposes, contrary to the designer's intention. This study analyzes the case of appropriate technology with an analysis framework that reflects Maier's affordance theory, and proposes a design solution that can overcome the limitations of existing design. Affordance theory is the theory of factors that cause the user to identify and use features through interpretation based on prior knowledge and experience about things. The analysis cases in this study are the interviews with the designers, management education materials, and manager interviews for water purification systems at three of six schools in Binh Dinh Province, Vietnam, from August 2015 to January 2018. The case was attempted to be improved by periodic installation, maintenance, and inspection, but similar problems continued to occur. First, the facility inspections and manager interviews are compared with manager training materials distributed at the time of installation to find inconsistencies. Next, we analyze the designer's intended affordance and the affordances that actually influenced the management behavior. And then, we propose design solutions based on commonly found problems and affordances. This study suggests that it is necessary to apply the design considering the user's behavior before distributing the appropriate technology, and this study will be precedent in the process of finding the improvement through the analysis framework based on the affordance.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.5
• /
• pp.473-483
• /
• 2022

BIM(Building Information Modeling) is a technology that can manage information throughout the entire life cycle of the construction industry and serves as a platform for improving productivity and integrating the entire construction industry. Currently, BIM is actively applied in developed countries, and its use at various overseas construction sites is increasing This is unclear. due to air shortening and budget savings. However, there is still a lack of institutional basis and technical limitations in the domestic construction sector, which have led to the lack of utilization of BIM. Various activation measures and institutional frameworks will need to be established for the early establishment of these productive BIMs in Korea. Therefore, as part of the research for the domestic settlement and revitalization of BIM, this study derived a number of key factors necessary for the development of the construction industry through brainstorming and expert surveys using AHP techniques and analyzed the relative importance of each factor. In addition, prior surveys by a group of experts resulted in 1, 3 items in level, 2, 9 items in level, and 3, 27 items in level, and priorities analysis was performed through pairwise comparisons. As a result of the AHP analysis, it was found that the relative importance weight of policy aspects was highest in level 1, and the policy factors in level 2 and the cost-based and incentive system introduction factors were considered most important in level 3. These findings show that the importance of the policy guidance or institutions underlying the activation of BIM rather than research and development or corporate innovation is relatively high, and that the preparation of policy plans by public institutions should be the first priority. Therefore, it is considered that the development of a policy system or guideline must be prioritized before it can be advanced to the next activation stage. The use of BIM technologies will not only contribute to improving the productivity of the construction industry, but also to the overall development of the industry and the growth of the construction industry. It is expected that the results of this study can provide as useful information when establishing policies for activating BIM in central government, relevant local governments, and related public institutions.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.393-413
• /
• 2019

As one of a shaman song to reveal features of the byeolsin rite, East Sea coast, Gyeongbuk, Korea is matgut have been discussed for a long time. The rite is held to greet other shamans who were invited by a village resident and the highest shaman to perform the rite. When there is no highest shaman in the village, or when the highest shaman lacks the ability to perform the exorcism, other shamans are invited if a person is required to meet the scale of the rite, which is a rite of passage to verify their abilities and to become a community, even while the byeolsingut is held. The best shaman team, or village Pungmul team, and shaman team, When the strings are between them, they play music and struggle with each other, and the strings are lifted, they greet the god of the game at the altar, and the shaman turns around and plays with the field. However, the process of greeting the shaman at the exorcism rite after 2000 and the procedure of "Paggi-bogi" in which shamans take turns singing songs are disappearing. In addition, although the village Pungmul team has participated in the rite as a welcoming party for the shaman team, the purpose of the rite, which is to greet the shaman, is also being tarnished by leaving the role of the village Pungmul team to the outside team. This is due to changes in the villagers' perception of gut and shaman. As in the old days, it was necessary to greet a shaman as a rite of worship, although it was not necessary to confirm its ability to perform the rite of the village, due to the disparity of status. However, after the shaman has been transformed from a 'mysterious' existence into an intangible cultural asset functional owner, the perception of shaman changes and the village confirms the shaman's ability through an intangible cultural asset certificate. In addition, the number of villagers who know the details of the rite is decreasing, and most of the tasks such as preparation and proceedings of the rite are delegated to the shaman to hold the byeolsingut, and the nature of the exorcism of the exorcism is changing.

• Journal of Korean Academy of Dental Administration
• /
• v.5 no.1
• /
• pp.13-21
• /
• 2017

Objective: To understand the experience of medical accidents and disputes according to clinical career of dental hygienists. Methods: A self-administrated questionnaire survey was conducted from May 2012 to June 2012 targeting 313 dental hygienists in Gyeongsangnam-do, Republic of Korea. Data were analyzed by descriptive analysis, χ2-test, and one-way analysis of variance (ANOVA). Collected data were analyzed using SPSS 18.0. Results: 1) The group who had more than 6 years of clinical experience experienced complaints from patients (70.3%) and dental hygienists duty (30.7%); 2) Complaints were related to diagnosis, dental treatment instruments and materials, scaling, impression preparation, and prosthodontics. Pediatric patients had significantly more complaints compared to other patients. Overall, there were more frequent cases in the group with over 6 years of clinical career; 3) For the psychological state after experiencing patients' complaints, 'the process is difficult, but I forget after thinking it could be happen' had 160 respondents. Among them, 38.1% had clinical experience of more than 6 years, 37.5% had less than 3 years, and 24.4% had clinical career of 3~6 years; 4) About 73.6% of those had 3~6 years of clinical career answered that 'sometimes it is doubtful' on the issue of medical accidents and conflicts on prevention education of dental hygienists that 'there is a doubt about the issue of medical treatment or the occurrence of disputes'. About 60.0% of those who had less than 3 years of clinical experience answered that it was highly 'necessary but not urgent' on the necessity of preventive education, while 87.1% of those who had more than 6 years of clinical career answered that it was highly 'necessary but not urgent' on the necessity of preventive education. The difference between the two was not statistically significant. Conclusions: It is necessary and urgent to provide education related to prevention and countermeasures against malpractice disputes for dental hygienists.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.2
• /
• pp.187-200
• /
• 2023

The purpose of this study is to examine how the start-up education, start-up support system, and start-up mentoring directly and indirectly conducted in universities affects entrepreneurial Intention, and to present programs and directions that can increase the possibility of start-up for college students. This study analyzed the effects of college students' satisfaction with university entrepreneurship education, awareness of the entrepreneurship support system, and entrepreneurship mentoring on entrepreneurial will, and then analyzed how entrepreneurship efficacy affects entrepreneurial will as a moderating effect. The recognition of the start-up support system was divided into the government start-up support policy and the university start-up support project, and start-up mentoring was divided into mentoring function (problem-solving function, networking function, communication function, motivation function) and mentor trust (cognitive trust, emotional trust). Regression analysis was performed on satisfaction with college entrepreneurship education, perception of entrepreneurship support system, entrepreneurship mentoring as independent variables, and willingness to entrepreneurship as dependent variables. In addition, entrepreneurship efficacy was designated as a moderating variable and analyzed. As a result of the study, first, it was found that satisfaction with start-up education had a positive (+) effect on college students' willingness to start a business. Second, among the start-up support systems, university start-up support projects were found to have a positive (+) effect on college students' willingness to start a business. Third, as a result of verifying whether entrepreneurial self-efficacy has a moderating effect on the relationship between college start-up support projects and college students' willingness to start a business while recognizing the start-up support system, it was found to have a moderating effect. The following implications can be derived based on the analysis results of this study. First, efforts to improve start-up education will be needed to increase the satisfaction of start-up education. Second, Through the operation of the start-up counseling center in the university, it will be possible to recognize the education system supported by the university, the university start-up support project that can carry out the indirect experience of start-up, and the government start-up support policy that supports funds. Third, It will be necessary to open a program that can provide start-up mentoring through connection with mentors in the start-up field, such as professors, employees, and senior start-ups in universities. Fourth, It is necessary to develop thorough education on the preparation process of start-ups, start-up special lectures where senior start-ups can indirectly experience the failure of start-ups, and programs for customized start-up education according to college students' major and individual tendencies.

• Information Systems Review
• /
• v.22 no.2
• /
• pp.137-166
• /
• 2020

While South Koreans overseas travelling rate has been increased every year, domestic travelling rate has been at a standstill for several years. The purpose of this study is to analyze domestic traveling styles of Koreans according to their generations in order to provide generation-specific traveling services. For this purpose, we categorized the survey respondents into four different generations, which are Millennium (age 19~34), X generation (35~54), Baby Boomer (55~64) and senior by following the criterions of the Korea National Tourism Organization. After then, we analyze factors related to travel preparation process, the actual traveling activities and satisfaction after the travel. In this study, 16,713 data collected by the Ministry of Culture, Sports and Tourism are used. The results of this study show that Korean people tends to acquire domestic traveling information from their own or acquaintances past experiences. Also, they do not prefer the organized trip for domestic travels, thus do not buy package products a lot. In addition, natural scenery, rich in cultural heritage, and convenient accommodation are the most important determinant factors affecting the overall travel satisfaction of level for all generations. The traveling characteristics for each generation are as follows. Millennium get traveling information from the internet a lot, and more specifically, they refer portal sites and social network services (SNS) in many cases. Also, they tend to travel in summer peak season to popular destinations and pursues active traveling experiences. Generation X has similar traveling patterns with Millennium, however they major transportation method is using their own car. Also, transportation convenience and satisfactory leisure activity are important factors affecting the overall satisfaction level to Generation X. On the other hand, Baby boomer generation has a greater emphasis on appreciation of nature, visiting famous restaurants, and relaxation, rather than actively participating experiencing programs. They travel evenly in summer and spring/fall season to many different areas instead of focusing on popular tourist spots. In addition, shopping and eating delicious food are the important factors affecting the overall satisfaction level for them. Lastly, Senior generation has similar characteristics with Baby boomer in many ways, however, they travel a lot on the same day using public transportations or car rental service. They prefer spring and autumn trips rather than summer peak season, and tend to buy packaged travel products a lot compared with other generations. If these different traveling characteristics of each generation are considered for organizing and customizing tourism services, it is expected that domestic tourism satisfaction level will be ultimately increased.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.40 no.2
• /
• pp.72-81
• /
• 2024

Purpose: This study aimed to assess the marginal and internal fit of 3-unit monolithic zirconia fixed partial dentures (FPDs) fabricated via computer-aided design and computer-aided manufacturing (CAD/CAM) from solid working casts and removable die system. Materials and Methods: The tooth preparation protocol for a zirconia crown was executed on the mandibular right first premolar and mandibular right first molar, with the creation of a reference cast featuring an absent mandibular right second premolar. The reference cast was duplicated using polyvinyl siloxane impression, from which 20 working casts were fabricated following typical dental laboratory procedures. For comparative analysis, 10 FPDs were produced from a removable die system (RD group) and the remaining 10 FPDs from the solid working casts (S group). The casts were digitized using a dental desktop scanner to establish virtual casts and design the FPDs using CAD. The definitive 3-unit monolithic zirconia FPDs were fabricated via a CAM milling process. The seated FPDs on the reference cast underwent digital evaluation for marginal and internal fit. The Mann-Whitney U test was applied for statistical comparison between the two groups (α = 0.05). Results: The RD group showed significantly higher discrepancies in fit for both premolars and molars compared to the S group (P < 0.05), particularly in terms of marginal and occlusal gaps. Color mapping also highlighted more significant deviations in the RD group, especially in the marginal and occlusal regions. Conclusion: The study found that the discrepancies in marginal and occlusal fits of 3-unit monolithic zirconia FPDs were primarily associated with those fabricated using the removable die system. This indicates the significant impact of the fabrication method on the accuracy of FPDs.