• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1000-1007
• /
• 2005

The aim of the present study was to examine the relationship of maternal factors such as knowledge, attitude and practice of weaning with infant feeding. The subjects were 103 mothers visiting a public health center in Gumi, Kyungbook who filled out self-administered Questionnaires. First of all, about $90\%$ of the participants recognized the importance of complementary foods and proper weaning practices. The response for the recognition of the importance of infant weaning process showed a significant difference by education levels. Concerning an appropriate time for the introduction of weaning foods, $53\%$ of mothers had commenced weaning at age $4\~6$ months, while $38\%$ had done so at age $6\~8$ months. Approximately $76\%$ of mothers fed their babies without the knowledge of age-related weaning method and type of weaning foods. There were no statistical differences in maternal weaning knowledges between levels of education and house income. Mothers with higher levels of education and family income tended to show high perception scores regarding possibility of food allergies caused by baby foods. A demand for reliable sources and education related to nutritious weaning foods and weaning practices were strong in the group with higher education. Knowledge of weaning method and baby foods were obtained by 59 of the 103 mothers from mass media, 35 from friends caring babies, and 9 obtained advice from health professionals or family. Advice from the heath professionals was not the main influence on their decision to introduce weaning foods. Although commercial baby foods are the most commonly used as first weaning foods, those with higher education groups considered commercial baby food are not nutritionally better than home-maid foods. The current findings suggest to us that to improve weaning process, mothers should be educated on the selection and preparation of nutritious, balanced weaning foods and on good weaning practices. It is advised that supportive health professionals from community public health centers should lead the education of infant feeding practices based on maternal characteristics and on basic food and nutritional knowledge.

• Korean Chemical Engineering Research
• /
• v.43 no.2
• /
• pp.206-214
• /
• 2005

Heterogeneously-catalyzed oxidation of aqueous phase trichloroethylene (TCE) over supported metal oxides has been conducted to establish an approach to eliminate ppm levels of organic compounds in water. A continuous flow reactor system was designed to effect predominant reaction parameters in determining catalytic activity of the catalysts for wet TCE decomposition as a model reaction. 5 wt.% $CoO_x/TiO_2$ catalyst exhibited a transient period in activity vs. on-stream time behavior, suggesting that the surface structure of the $CoO_x$ might be altered with on-stream hours; regardless, it is probable to be the most promising catalyst. Not only could the bare support be inactive for the wet decomposition reaction at $36^{\circ}C$, but no TCE removal also occurred by the process of adsorption on $TiO_2$ surface. The catalytic activity was independent of all particle sizes used, thereby representing no mass transfer limitation in intraparticle diffusion. Very low TCE conversion appeared for $TiO_2$-supported $NiO_x$ and $CrO_x$ catalysts. Wet oxidation performance of supported Cu and Fe catalysts, obtained through an incipient wetness and ion exchange technique, was dependent primarily on the kinds of the metal oxides, in addition to the acidic solid supports and the preparation routes. 5 wt.% $FeO_x/TiO_2$ catalyst gave no activity in the oxidation reaction at $36^{\circ}C$, while 1.2 wt.% Fe-MFI was active for the wet decomposition depending on time on-stream. The noticeable difference in activity of the both catalysts suggests that the Fe oxidation states involved to catalytic redox cycle during the course of reaction play a significant role in catalyzing the wet decomposition as well as in maintaining the time on-stream activity. Based on the results of different $CoO_x$ loadings and reaction temperatures for the decomposition reaction at $36^{\circ}C$ with $CoO_x/TiO_2$, the catalyst possessed an optimal $CoO_x$ amount at which higher reaction temperatures facilitated the catalytic TCE conversion. Small amounts of the active ingredient could be dissolved by acidic leaching but such a process gave no appreciable activity loss of the $CoO_x$ catalyst.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.1
• /
• pp.1-10
• /
• 2023

The cathode, which is one of the four major components of a lithium secondary battery, is an important component responsible for the energy density of the battery. The mixing process of active material, conductive material, and polymer binder is very essential in the commonly used wet manufacturing process of the cathode. However, in the case of mixing conditions of the cathode, since there is no systematic method, in most cases, differences in performance occur depending on the manufacturer. Therefore, LiMn₂O₄ (LMO) cathodes were prepared using a commonly used THINKY mixer and homogenizer to optimize the mixing method in the cathode slurry preparation step, and their characteristics were compared. Each mixing condition was performed at 2000 RPM and 7 min, and to determine only the difference in the mixing method during the manufacture of the cathode other experiment conditions (mixing time, material input order, etc.) were kept constant. Among the manufactured THINKY mixer LMO (TLMO) and homogenizer LMO (HLMO), HLMO has more uniform particle dispersion than TLMO, and thus shows higher adhesive strength. Also, the result of the electrochemical evaluation reveals that HLMO cathode showed improved performance with a more stable life cycle compared to TLMO. The initial discharge capacity retention rate of HLMO at 69 cycles was 88%, which is about 4.4 times higher than that of TLMO, and in the case of rate capability, HLMO exhibited a better capacity retention even at high C-rates of 10, 15, and 20 C and the capacity recovery at 1 C was higher than that of TLMO. It's postulated that the use of a homogenizer improves the characteristics of the slurry containing the active material, the conductive material, and the polymer binder creating an electrically conductive network formed by uniformly dispersing the conductive material suppressing its strong electrostatic properties thus avoiding aggregation. As a result, surface contact between the active material and the conductive material increases, electrons move more smoothly, changes in lattice volume during charging and discharging are more reversible and contact resistance between the active material and the conductive material is suppressed.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.18 no.3
• /
• pp.45-60
• /
• 2023

In this study, we analyzed the influence of middle-aged office workers' entrepreneurial competency and entrepreneurial opportunity recognition on entrepreneurial intention by mediating entrepreneurial opportunity evaluation. Sub-variables of entrepreneurial competency were classified into prior knowledge, positive attitude, and social network. For the empirical analysis of this study, an online survey using Naver Office was conducted for about 15 days (February 6, 2023 - February 20, 2023) targeting office workers across the country who are interested in starting a business, and a total of 262 copies were collected and missing values. For 250 copies excluding 12 copies, SPSS Ver.24.0 and PROCESS MACRO Model 4.0 were used for empirical analysis. The results of the analysis are as follows: First, the higher the prior knowledge of the founder's individual competency, social network, and entrepreneurial opportunity recognition, the higher the entrepreneurial opportunity evaluation and entrepreneurial intention. On the other hand, it was found that the positive attitude among entrepreneurs' individual competencies did not affect entrepreneurship opportunity evaluation and entrepreneurial intention. In addition, the magnitude of the influence on entrepreneurial opportunity evaluation and entrepreneurial intention was in the order of entrepreneurial opportunity recognition, prior knowledge, and social network. This is because the positive attitude of middle-aged office workers towards start-up has a negative image of start-up due to the shrinking start-up environment due to COVID-19, fear of failure due to lack of preparation for start-up, and successive cases of start-up failure due to cognitive bias errors due to overconfidence. implying that there is Second, it was found that the evaluation of entrepreneurship opportunities had a significant positive (+) effect on entrepreneurial intention in a situation where the entrepreneur's individual competency and entrepreneurial opportunity recognition were controlled. Third, the startup opportunity evaluation was shown to mediate between the prior knowledge of the entrepreneur's individual competency, social network and entrepreneurial opportunity recognition, and entrepreneurial intention, but it did not mediate between positive attitude and entrepreneurial intention. Fourth, among the factors influencing entrepreneurial opportunity evaluation and entrepreneurial intention, entrepreneurial opportunity recognition was found to be larger than founder's individual competency, confirming the importance of entrepreneurial opportunity recognition. Fifth, it was found that prior knowledge and network, which are individual capabilities of the founder, affect the evaluation of entrepreneurial opportunities and entrepreneurial intention, so that strengthening entrepreneurship education to recognize the importance of cultivating prior entrepreneurial knowledge and experience can revitalize middle-aged office workers' entrepreneurship. confirmed.

• Journal of Intelligence and Information Systems
• /
• v.26 no.2
• /
• pp.57-78
• /
• 2020

With the development of the Internet, consumers have had an opportunity to check product information easily through E-Commerce. Product reviews used in the process of purchasing goods are based on user experience, allowing consumers to engage as producers of information as well as refer to information. This can be a way to increase the efficiency of purchasing decisions from the perspective of consumers, and from the seller's point of view, it can help develop products and strengthen their competitiveness. However, it takes a lot of time and effort to understand the overall assessment and assessment dimensions of the products that I think are important in reading the vast amount of product reviews offered by E-Commerce for the products consumers want to compare. This is because product reviews are unstructured information and it is difficult to read sentiment of reviews and assessment dimension immediately. For example, consumers who want to purchase a laptop would like to check the assessment of comparative products at each dimension, such as performance, weight, delivery, speed, and design. Therefore, in this paper, we would like to propose a method to automatically generate multi-dimensional product assessment scores in product reviews that we would like to compare. The methods presented in this study consist largely of two phases. One is the pre-preparation phase and the second is the individual product scoring phase. In the pre-preparation phase, a dimensioned classification model and a sentiment analysis model are created based on a review of the large category product group review. By combining word embedding and association analysis, the dimensioned classification model complements the limitation that word embedding methods for finding relevance between dimensions and words in existing studies see only the distance of words in sentences. Sentiment analysis models generate CNN models by organizing learning data tagged with positives and negatives on a phrase unit for accurate polarity detection. Through this, the individual product scoring phase applies the models pre-prepared for the phrase unit review. Multi-dimensional assessment scores can be obtained by aggregating them by assessment dimension according to the proportion of reviews organized like this, which are grouped among those that are judged to describe a specific dimension for each phrase. In the experiment of this paper, approximately 260,000 reviews of the large category product group are collected to form a dimensioned classification model and a sentiment analysis model. In addition, reviews of the laptops of S and L companies selling at E-Commerce are collected and used as experimental data, respectively. The dimensioned classification model classified individual product reviews broken down into phrases into six assessment dimensions and combined the existing word embedding method with an association analysis indicating frequency between words and dimensions. As a result of combining word embedding and association analysis, the accuracy of the model increased by 13.7%. The sentiment analysis models could be seen to closely analyze the assessment when they were taught in a phrase unit rather than in sentences. As a result, it was confirmed that the accuracy was 29.4% higher than the sentence-based model. Through this study, both sellers and consumers can expect efficient decision making in purchasing and product development, given that they can make multi-dimensional comparisons of products. In addition, text reviews, which are unstructured data, were transformed into objective values such as frequency and morpheme, and they were analysed together using word embedding and association analysis to improve the objectivity aspects of more precise multi-dimensional analysis and research. This will be an attractive analysis model in terms of not only enabling more effective service deployment during the evolving E-Commerce market and fierce competition, but also satisfying both customers.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.3
• /
• pp.59-66
• /
• 2023

This study attempts to examine the process of establishing a Japanese-style garden in the modern period through the perspectives of garden designers, spatial composition, spatial components, and materials used in their works, and to use it as data for embodying the identity of Korean garden. The results are as follows: First, by incorporating elements associated with Koreanness into the modern garden culture, there are differences in location, presence, and subjectivity when compared to Japan. This reflects Japan's relatively seamless cultural continuity compared to Korea's cultural disconnection during the modern period. Second, prior to the modern period, Japan's garden culture spread and continued to develop throughout the country without significant interruptions. However, during the modern period, the Meiji government promoted the policy of 'civilization and enlightenment (Bunmei-kaika, 文明開化)' and introduced advanced European and American civilizations, leading to the popularity of Western-style architectural techniques. Unfortunately, the rapid introduction of Western culture caused the traditional Japanese culture to be overshadowed. In 1879, British architect Josiah Condor guided Japanese architects and introduced atelier and traditional designs of Japanese gardens into the design. The garden style of Ogawa Jihei VII, a garden designer in Kyoto during the Meiji and Taisho periods, was accepted by influential political and business leaders who sought to preserve Japan's traditional culture. And a protection system of garden was established through the preparation of various laws and regulations. Third, as a comprehensive analysis of Japanese modern gardens, the examination of garden designers, Japanese components, materials, elements, and the Japanese-style showed that Yamagata Aritomo, Ogawa Jihei VII, and Mirei Shigemori were representative garden designers who preserved the Japanese-style in their gardens. They introduced features such as the creation of a Daejicheon(大池泉) garden, which involves a large pond on a spacious land, as well as the naturalistic borrowed scenery method and water flow. Key components of Japanese-style gardens include the use of turf, winding garden paths, and the variation of plant species. Fourth, an analysis of the Japanese-style elements in the target sites revealed that the use of flowing water had the highest occurrence at 47.06% among the individual elements of spatial composition. Daejicheon and naturalistic borrowed scenery were also shown. The use of turf and winding paths were at 65.88% and 78.82%, respectively. The alteration of tree species was relatively less common at 28.24% compared to the application of turf or winding paths. Fifth, it is essential to discover more gardens from the modern period and meticulously document the creators or owners of the gardens, the spatial composition, spatial components, and materials used. This information will be invaluable in uncovering the identity of our own gardens. This study was conducted based on the analysis of the process of establishing the Japanese-style during Japan's modern period, utilizing examples of garden designers and gardens. While this study has limitations, such as the absence of in-depth research and more case studies or specific techniques, it sets the stage for future exploration.

• Sim-seong Yeon-gu
• /
• v.38 no.1
• /
• pp.112-160
• /
• 2023

This study examined the Korean folklore "Borrowed Fortune from Heaven" from the perspective of Analytical Psychology, considering it a manifestation of the human psyche, and tried to gain a deeper understanding of what happens in our mind. Through the exploration, the researcher was able to re-identify the ongoing psychological process operating in the depths of our mind, pertaining to the emergence of a new dimension of consciousness. Particularly the researcher was able to gain some insights into how the potential psychic elements for the new consciousness are prepared in the unconscious, how they get integrated into the conscious life, and what is essential for the accomplishment of the process. The tale begins with a poor woodcutter who, in order to escape from poverty, starts gathering twice as much firewood. However, the newly acquired amount disappears overnight, so the woodcutter gets perplexed and curious about where it goes and who is taking it. He seeks to find out the truth, which leads him to an unexpected journey to Heaven. There he learns the truth concerning his very tiny amount of fortune, and discovers another big fortune for an unborn person. By pleading with the ruler of Heaven, the woodcutter borrows that grand fortune, on the condition that he must return it to the owner when the time comes. After that, the woodcutter's life undergoes a series of changes, in which he finally becomes a wealthy farmer, but gradually is reminded more and more that the destined time is approaching. In the end, the fortune is completely transferred to the original owner, resulting in a dramatic twist and the creation of a new life circumstances. The overall plot can be understood as a reflection of the psychological process aiming at the evolution of consciousness through renewal. In this context, the woodcutter can be considered a psychic element that undergoes a continuous transformation in preparation for participating in the upcoming new consciousness. In other words, the changes brought about by this figure can be interpreted as a gradual and increasingly detailed foreshadowing of what the forthcoming new consciousness would be like. Interestingly, as the destined time approaches, the protagonist's anguish in conflict reaches its climax, despite his good performance in his role until then. This effectively portrays the difficulty of achieving a new dimension of consciousness, which requires moving past the last step. All the events in the story ultimately converge at this point. After all, the resolution occurs when the protagonist lets go of everything he has and follows the will of Heaven. This implies what is essential for the renewal of consciousness. Only by completely complying with the entire mind, the potential constituents of the new consciousness that should play important roles in a renewal and evolution of consciousness through experiencing, can participate in the ultimate outcome. As long as they remain trapped in any intermediate stage, the totality of the psyche would develop another detour aiming at the final destination, which means the beginning of another period of suffering carrying a purposeful meaning. The tale suggests that this truth will be applied everywhere that renewal of consciousness is directed, whether for an individual or a society.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.20 no.1
• /
• pp.32-36
• /
• 2016

Purpose In nuclear medicine examination, $^{131}I$ is widely used in nuclear medicine examination such as diagnosis, treatment, and others of thyroid cancer and other diseases. $^{131}I$ conducts examination and treatment through emission of ${\gamma}$ ray and ${\beta}^-$ ray. Since $^{131}I$ (364 keV) contains more energy compared to $^{99m}Tc$ (140 keV) although it displays high integrated rate and enables quick discharge through kidney, the objective of this study lies in comparing the difference in exposure dose of $^{131}I$ before and after wearing apron when handling $^{131}I$ with focus on 3 elements of external exposure protection that are distance, time, and shield in order to reduce the exposure to technicians in comparison with $^{99m}Tc$ during the handling and administration process. When wearing apron (in general, Pb 0.5 mm), $^{99m}Tc$ presents shield of over 90% but shielding effect of $^{131}I$ is relatively low as it is of high energy and there may be even more exposure due to influence of scattered ray (secondary) and bremsstrahlung in case of high dose. However, there is no special report or guideline for low dose (74 MBq) high energy thus quantitative analysis on exposure dose of technicians will be conducted based on apron wearing during the handling of $^{131}I$. Materials and Methods With patients who visited Department of Nuclear Medicine of our hospital for low dose $^{131}I$ administration for thyroid cancer and diagnosis for 7 months from Jun 2014 to Dec 2014 as its subject, total 6 pieces of TLD was attached to interior and exterior of apron placed on thyroid, chest, and testicle from preparation to administration. Then, radiation exposure dose from $^{131}I$ examination to administration was measured. Total procedure time was set as within 5 min per person including 3 min of explanation, 1 min of distribution, and 1 min of administration. In regards to TLD location selection, chest at which exposure dose is generally measured and thyroid and testicle with high sensitivity were selected. For preparation, 74 MBq of $^{131}I$ shall be distributed with the use of $2m{\ell}$ syringe and then it shall be distributed after making it into dose of $2m{\ell}$ though dilution with normal saline. When distributing $^{131}I$ and administering it to the patient, $100m{\ell}$ of water shall be put into a cup, distributed $^{131}I$ shall be diluted, and then oral administration to patients shall be conducted with the distance of 1m from the patient. The process of withdrawing $2m{\ell}$ syringe and cup used for oral administration was conducted while wearing apron and TLD. Apron and TLD were stored at storage room without influence of radiation exposure and the exposure dose was measured with request to Seoul Radiology Services. Results With the result of monthly accumulated exposure dose of TLD worn inside and outside of apron placed on thyroid, chest, and testicle during low dose $^{131}I$ examination during the research period divided by number of people, statistics processing was conducted with Wilcoxon Signed Rank Test using SPSS Version. 12.0K. As a result, it was revealed that there was no significant difference since all of thyroid (p = 0.345), chest (p = 0.686), and testicle (p = 0.715) were presented to be p > 0.05. Also, when converting the change in total exposure dose during research period into percentage, it was revealed to be -23.5%, -8.3%, and 19.0% for thyroid, chest, and testicle respectively. Conclusion As a result of conducting Wilcoxon Signed Rank Test, it was revealed that there is no statistically significant difference (p > 0.05). Also, in case of calculating shielding rate with accumulate exposure dose during 7 months, it was revealed that there is irregular change in exposure dose for inside and outside of apron. Although the degree of change seems to be high when it is expressed in percentage, it cannot be considered a big change since the unit of accumulated exposure dose is in decimal points. Therefore, regardless of wearing apron during high energy low dose $^{131}I$ administration, placing certain distance and terminating the administration as soon as possible would be of great assistance in reducing the exposure dose. Although this study restricted $^{131}I$ administration time to be within 5 min per person and distance for oral administration to be 1m, there was a shortcoming to acquire accurate result as there was insufficient number of N for statistics and it could be processed only through non-parametric method. Also, exposure dose per person during lose dose $^{131}I$ administration was measured with accumulated exposure dose using TLD rather than through direct-reading exposure dose thus more accurate result could be acquired when measurement is conducted using electronic dosimeter and pocket dosimeter.

• Applied Biological Chemistry
• /
• v.16 no.2
• /
• pp.60-77
• /
• 1973

The non-enzymatic browning phenomenons of red ginseng were studied to identify these compounds which function as the factors for browning. The samples were classified into five divisions; Fresh ginseng, blanched ginseng, sun dried red ginseng, dehydrated red ginseng, and browning accelerated red ginseng respectively, and the various compounds in each of them were analyzed quantitatively and investigated the compounds which were thought to function for browning during the drying and the dehydration processes; the results were as follows. 1. The chemical compositions among five divisions did not show any difference except a) total and reducing sugars, b) total acids, c) water soluble extracts; a) and b) were decreased during the drying process, c) was decreased about 6-7% in red ginseng divisions. 2. Sixteen free amino acids; asp., thr., ser., glu., gly., ala., val., cys., met., ileu., leu., tyr., phe., lys., his., and arg, were identified in each division. Among them the arg, was extremly high. All of the essential amino acids were contained, while generally these amino acids were decreased in drying period and their rates were smaller in dehydrated red ginseng than in sun dried red ginseng. 3. Three kinds of sugars; fructose, glucose and sucrose were identified and other four kinds of unidentified sugars were seperated. The content of sucrose was 80% and all kind of sugars were generally less in red ginseng divisions than in the other two divisions. The decreasing rate of sngars was higher in the sun dried red ginseng than in the dehydrated red ginseng. Especially the decreasing rate of the reducing sugars was high as compared with that of sucrose. 4. Almost all the ascorbic acid was decomposed during the blanching whereas there could'nt be shown any change of the ascorbic acid content during the period of drying. 5. Eleven kinds of volatile acids; acetic acid, propionic acid, acrylic acid, iso-butyric acid, n-butyric acid, isovaleric acid, n-valeric acid, isoheptylic acid, n-heptylic acid, and an unknown volatile acid were identified. They showed a little decrease during the period of blanching perhaps on account of their volatility whereas they were increased in drying period. 6. Six kinds of non-volatile acids; citric acid, malic acid, ${\alpha}-ketoglutaric$ acid, succinic acid, pyruvic acid and glutaric acid were identified. The content of them were decreased during the drying procedures in red ginseng but only that of succinic acid was increased. 7. Three kinds of polyphenols; 3-caffeyl quinic acid, 4-caffeyl quinic acid, 5-caffeyl quinic acid and an unknown polyphenol were identified. The content of them showed considerable decrease during the drying procedures, especially in sun drying. 8. The intensity of the browning in each divisior was as follows; browning accelerated red ginseng> sun dried red ginseng> dehydrated red ginseng. 9. In the process of red ginseng preparation, a. certain relationship could be found between the decreasing rates of amino acids, reducing sugars, polyphenols and the intensity of browning. Therefore the browning phenomenon may be concluded that nonenzymatic browning reactions of the amino-carbonyl reaction and autoxidation of polyphenols are the most important processes, furthermore, as their reactions could be controlled it is thought to be possible to accelerate effectively browning within a relatively short period.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.753-760
• /
• 2011

This study was carried out to investigate the effects of various kinds of commercial salts, including Hanju salt, Deep sea water salt, $Salicornia$ $herbacea$ salt, Guwoon salt, Bamboo salt and salt replacement for the reduction of Na concentration in $kimchi$. The fermentative characteristics of these salts were determined during the fermentation at $10^{\circ}C$. $kimchi$ using a salt replacement and with $Salicornia$ $herbacea$ salt showed slow changes in their pH values. The use of salt replacement showed the lowest level(0.97%) of the retardation of $kimchi$ fermentation. For the preparation of $kimchi$ that used a low Na, chemical and microbial changes were investigated during the fermentation of process, examining preparations with both table salt and a salt replacement(CS-17). The salinity level of $kimchi$ prepared with table salt(control) and the salt replacement (CS-17) were 2.17~2.5% and 1.72~1.99% during fermentation, respectively. The Na contents of $kimchi$ with CS-17(562.5 mg%) showed a lower level than that with table salt(879.0 mg%). The growth of Leuconostoc sp. was highest ($1.5{\times}10^8$ cfu/g) in $kimchi$ with CS-17 at 6 day-fermentation, but the highest level($2.3{\times}10^7$ cfu/g) in $kimchi$ with table salt was at 7dayfermentation. The cells of $Lactobacillus$ sp. in the $kimchi$ prepared with CS-17 and table salt increased to $3.0{\times}10^8$ cfu/g and $6.0{\times}10^7$ cfu/g at 8day-fermentation, respectively. It was concluded that the use of CS-17 could reduce Na levels in $kimchi$ and mitigate over-maturation.