• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.04a
• /
• pp.133-138
• /
• 2000

MgO thin films were deposited using $Mg(tmhd)_2$ as a precursor dissolved in a solvent by electrostatic spray pyrolysis. When a pure tetra hydro furan was used as a solvent, a large number of particles appeared on the MgO thin film surface due to homogeneous nucleation. However, by adding 1-butyl alcohol or 1-octyl alcohol to THF, homogeneous nucleation was restricted and the number density of the large particles was also drastically reduced. X-ray diffraction analysis showed that the MgO films had a (100) preferred orientation regardless of the type of solvents used. Characterization using Fourier Transformed-Infrared and spectroscopic photometer revealed that the crystallized MgO thin films on the glass substrate had a high optical transmittance (> 85 %) in the visible range. Discharge characteristics of MgO thin films deposited by ESP method on an alternating-current plasma display panel were compared with a MgO thin film prepared by reactive radio-frequency planar magnetron sputtering.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2009.11a
• /
• pp.33-36
• /
• 2009

Korea is the 3rd highest country in population density of the world,furthermore, 1/5 of Korean lives in Seoul with only 0.0% tiny area size. It explains the high-rise apartment has diffused so fast. Regardless of its height, almost all apartments have been planned in a very uniform way, ignoring the possibilities of vertical community and commercial culture. Since considerable number of residents have within building, ways to improve the community and commercial culture need to be explored. One major way to do is providing community space where residents are expected to use in a natural way. The purpose of this research is to identify preferred location of community space in each apartment building. Web guesting survey was used as main methodology. 83 data were collected during mid October, 2009. As results, lobby at the first floor was most favorably selected by super high-rise apartment residents due to convenience, accessibility.

• Culinary science and hospitality research
• /
• v.15 no.2
• /
• pp.309-321
• /
• 2009

This study was conducted the physicochemical and sensory characteristics of cookies added with Angelica gigas Nakai powder(0~2.5%). The pH of the samples ranged from 6.13 to 6.27, and the density ranged from 0.99 to 1.15. Increasing the amount of Angelica gigas Nakai powder in the cookies decreased the spread factor of the cookies and tended to decrease lightness(L) and yellowness(b) in the Hunter color value with redness(a) increased. For the textural characteristics, the addition of Angelica gigas Nakai powder increased strength and hardness. The sensory evaluation showed that the cookies with Angelica gigas Nakai powder were preferred more than those without in color, odor, texture, taste and overall preference. Especially, cookies with 1.5% of Angelica gigas Nakai powder were valued as best.

• Korean Journal of Environmental Biology
• /
• v.23 no.4
• /
• pp.367-373
• /
• 2005

We conducted a year-long survey in 2000 to examine seasonal fluctuations in the abundance of the demersal copepod Pseudodiaptomus sp., the dominant copepod in the Seomjin River estuary, where the spring tide strongly affects changes in salinity gradients. Pseudodiaptomus sp. was found throughout the year in the entire range of salinities measured, but most individuals appeared at oligohaline conditions below 5.0 psu, and less than $2\%$ were observed in polyhaline conditions above 18.0 psu. The peak abundance occurred during autumn in oligohaline waters, and the density was relatively low during the rainy season in summer. In spring and autumn, copepodites were most abundant in oligohaline waters, although they were also fairly abundant in mesohaline conditions $(5\~18\;psu)$. Females with egg sacs appeared in oligo- and mesohaline waters during spring and autumn but were seldom found in polyhaline conditions throughout the year. Our results indicate that, despite the strong physical influence of the tide, Pseudodiaptomus sp. can manipulate its position to remain at its preferred salinity. We also found that spawning mainly occurred in oligohaline waters twice a year.

• Korean Journal of Materials Research
• /
• v.24 no.6
• /
• pp.319-325
• /
• 2014

Cobalt nano-rods were fabricated using a template-free electrochemical-deposition process. The structure of cobalt electro-deposits strongly depends on the electrolyte composition and on the density of the applied current. In particular, as the content of boric acid increased in the electrolyte, deposits of semi-spherical nuclei formed, and then grew into one-dimensional nano-rods. From analysis of the electro-deposits created under the conditions of continuous and pulsed current, it is suggested that the distribution of the active species around the electrode/electrolyte interface, and their transport, might be an important factor affecting the shape of the deposits. When transport of the active species was suppressed by lowering the deposition temperature, more of the well-defined nano-rod structures were obtained. The optimal conditions for the preparation of well-defined nano-rods were determined by observing the morphologies resulting from different deposition conditions. The maximum height of the cobalt nano-rods created in this work was $1{\mu}m$ and it had a diameter of 200 nm. Structural analysis proved that the nano-rods have preferred orientations of (111).

• Journal of Power Electronics
• /
• v.18 no.4
• /
• pp.975-984
• /
• 2018

This work presents a high efficiency phase shifted full bridge (PSFB) DC-DC converter for use in the second stage of a battery charger for neighborhood electrical vehicle (EV) applications. In the design of the converter, Lithium-ion battery cells are preferred due to their high voltage and current rates, which provide a high power density. This requires wide range output voltage regulation for PSFB converter operation. In addition, the battery charger works with a light load when the battery charge voltage reaches its maximum value. The soft switching of the PSFB converter depends on the dead time optimization and load condition. As a result, the converter has to work with soft switching at a wide range output voltage and under light conditions to reach high efficiency. The operation principles of the PSFB converter for the continuous current mode (CCM) and the discontinuous current mode (DCM) are defined. The performance of the PSFB converter is analyzed in detail based on wide range output voltage and load conditions in terms of high efficiency. In order to validate performance analysis, a prototype is built with 42-54 V / 15 A output values at a 200 kHz switching frequency. The measured maximum efficiency values are obtained as 94.4% and 76.6% at full and at 2% load conditions, respectively.

• Fashion & Textile Research Journal
• /
• v.16 no.1
• /
• pp.153-159
• /
• 2014

This study evaluates the changes of the subjective hand, preference, comfort and mechanical properties of tricot based artificial suede made from sea-island type micro fibers according to raising condition. The subjective hand and the preference of raised suede for jacket were rated by the 20's and 30's women experts according to raising cycles. Comfort properties were evaluated by air permeability, water vapor transmission, and thermal transmission. Mechanical properties were measured by the KES-FB system. The subjective hand of artificial suede was categorized into three hand factors: smoothness, warmness and thickness. Smoothness, warmness and thickness perception increased with raising cycles which affected hand preference and luxuriousness perception. The thickness and wale density of suede increased with the number of raising. Suede became more compact and less pliable and less stretchable due to increased fabric thickness; in addition, the surface of suede became smoother and compressive since the surface evenness of suede improved with smaller fiber fineness and an increased amount of naps covered the base fabric. Furthermore, water vapor transmission decreased and thermal insulation increased. The best raising conditions for artificial suede was four cycles in which artificial suede was preferred without changes in physical properties.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.255-260
• /
• 1998

The ionized magnetron sputtering is very useful in filling of small metal contact or via in ULSI processing with very high ionization upto 80% based on incoming flux ratio. But fairly high sputtering gas pressure is required to get high ionization, which instead gives low deposition rate and diverse incoming neutral's angular distribution. The electron quenching by heavily sputtered metals and gas rarefaction were considered the main causes of decreased ionization in this process. RF pulsing of sputtering power was proposed to solve those two problems. The results showed that 10㎳/10 ㎳ and 100㎳/100 ㎳ of on/off pulsings were optimal pulse conditions from OES measurements and also XRD of deposited Ag film showed distinct change of (111) to (200) preferred orientation. These results were analysed in a view point of neutral gas heating and cooling by high power sputtering.

• The Korean Journal of Malacology
• /
• v.27 no.4
• /
• pp.299-306
• /
• 2011

This paper examines relation between growth of adult top shell and their selectivity over different marine algae. For the study the top shell density and the algal species in different depth were surveyed by SCUBA. To test selectivity over different types of algae, five algal species including Ecklonia cava, Undaria pinnatifida, Ulva spp, Gelidium amansii and Sargassum spp were provided to top shells in indoor water tank condition. In the field survey, the wet weight of Ecklonia cava was significantly (r = 0.612, p < 0.05) correlated to the shell length (SL) of top shell. In the indoor water tank experiment conducted over 12 hours after sunrise, adult top shell (SL > SL 4.5 cm) tended to select Ecklonia cava and Undaria pinnatifida, which are common and abundant algal in the subtidal waters in Jeju Island. Our field survey and the indoor experiment suggest that E. cava and U. pinnatifida could be food preferred by adult top shell in its habitat.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.570-573
• /
• 2002

Pb(Zr0.52Ti0.48)O3 (PZT) thin films were deposited on the Pt/Ti bottom electrode by rf magnetron sputtering method from target containing 5%, 25% and 50% Pb excess for applying ferroelectric random access memory (FRAM). PZT films were deposited at $300^{\circ}C$ and then they were crystallized by rapid thermal annealing (RTA) at $700^{\circ}C$. After RTA treatment, our results showed that all PZT films indicated perovskite polycrystalline structure with preferred orientation (110) and no pyrochlore phase was observed by X-ray diffraction (XRD) and by Scanning electron microscopy (SEM). A well-fabricated PZT film of excess Pb 25% capacitor showed a leakage current density in the order of $2.63{\times}10^{-7}A/cm^2$ at 100kV/cm, a remanent polarization of $3.385{\mu}C/cm^2$ and a coercive field of 41.32 kV/cm. The results showed that Pb excess of target affects to electrical properties of PZT thin film.