• Journal of Industrial and Engineering Chemistry
• /
• v.68
• /
• pp.311-324
• /
• 2018

Herein,the Neodymium ion ($Nd^{3+}$) doped CoAl-LDH have been successfully prepared via co-precipitation method and was used as a precursor of Nd-doped CoAl-mixed metal oxides (MMO). The photocatalytic activity of doped LDH and MMO was investigated in the degradation of an azo dye, C.I. Acid Red 14, under visible light irradiation. DRS and PL analysis demonstrated decreasing in the band gap energy and recombination of photo-induced charge carriers of Nd-doped LDH and MMO compared with the pristine CoAL-LDH. Due to significant difference in photocatalytic performance. A power law empirical kinetic model was obtained for predicting the photocatalytic degradation efficiency.

• Korean Journal of Remote Sensing
• /
• v.19 no.1
• /
• pp.11-19
• /
• 2003

This paper applies the Scan-Angle Method (SAM) to the Total Ozone Mapping Spectrometer (TOMS) aboard Earth Probe (EP) satellite for determining tropospheric ozone based on TOMS scan geometry. In the northern tropical Africa burning season, the distribution of the SAM-derived tropospheric ozone presents a tropospheric ozone enhancement related to biomass burning. This distribution is consistent with that of fire counts observed from Along Track Scanning Radiometer (ATSR) and that of carbon monoxide, the tropospheric ozone precursor, observed from Measurements of Pollution In The Troposphere (MOPITI). However, this feature is not shown in the distribution of tropospheric ozone derived from other TOMS-based algorithms for the northern burning season. In the high latitudes, the influence of pollution in the SAM results is seen over the northern continents in agreement with carbon monoxide for northern summer when the dynamical activity is weak in the northern hemisphere.

• Journal of Periodontal and Implant Science
• /
• v.42 no.3
• /
• pp.95-104
• /
• 2012

Purpose: The purpose of this study was to determine whether increasing the Ti6Al4V surface oxide negative charge through heat ($600^{\circ}C$) or radiofrequency plasma glow discharge (RFGD) pretreatment, with or without a subsequent coating with fibronectin, stimulated osteoblast gene marker expression in the MC3T3 osteoprogenitor cell line. Methods: Quantitative real-time polymerase chain reaction was used to measure changes over time in the mRNA levels for osteoblast gene markers, including alkaline phosphatase, bone sialoprotein, collagen type I (${\alpha}1$), osteocalcin, osteopontin and parathyroid hormone-related peptide (PTH-rP), and the osteoblast precursor genes Runx2 and osterix. Results: Osteoprogenitors began to differentiate earlier on disks that were pretreated with heat or RFGD. The pretreatments increased gene marker expression in the absence of a fibronectin coating. However, pretreatments increased osteoblast gene expression for fibronectin-coated disks more than uncoated disks, suggesting a surface oxide-mediated specific enhancement of fibronectin's bioactivity. Heat pretreatment had greater effects on the mRNA expression of genes for PTH-rP, alkaline phosphatase and osteocalcin while RFGD pretreatment had greater effects on osteopontin and bone sialoprotein gene expression. Conclusions: The results suggest that heat and RFGD pretreatments of the Ti6Al4V surface oxide stimulated osteoblast differentiation through an enhancement of (a) coated fibronectin's bioactivity and (b) the bioactivities of other serum or matrix proteins. The quantitative differences in the effects of the two pretreatments on osteoblast gene marker expression may have arisen from the unique physico-chemical characteristics of each resultant oxide surface. Therefore, engineering the Ti6Al4V surface oxide to become more negatively charged can be used to accelerate osteoblast differentiation through fibronectin-dependent and independent mechanisms.

• The Korean Journal of Food And Nutrition
• /
• v.36 no.2
• /
• pp.129-136
• /
• 2023

In order to investigate the optimal UVB (ultraviolet B) treatment conditions for vitamin D₂ enhancement of freeze-dried ear mushroom, sample size (below 300 ㎛~whole), UV treatment temperature (30~60℃), treatment density (6.25~50.0 mg/cm²) and the samples mixing frequency (1~32 times) were treated differently. After that, chromaticity, vitamin D₂ and ergosterol (vitamin D₂ precursor) contents were investigated. As a result of the investigating, effective UVB treatment conditions for vitamin D₂ enhancement are as follows. The sample sizes were 2~4 mm and finely crushed pieces. The treatment temperatures were 50℃ and 60℃. The treatment density was 12.5 to 25.0 mg/cm², and the number of sample mixing was 8 times or more. As the amount of vitamin D₂ increased by UVB treatment, the ergosterol content generally tended to decrease. However, under some UVB treatment conditions, the vitamin D₂ content was not high despite the decrease of ergosterol content. Under the conditions set in this experiment, it was possible to obtain ear mushrooms with enhanced vitamin D₂ up to 26,968.7 ㎍/100 g. Therefore, it is thought that the ear mushroom is highly likely to be used as a vitamin D source and nutritionally fortified food ingredient.

• Journal of Life Science
• /
• v.19 no.5
• /
• pp.688-691
• /
• 2009

The methanol extract of muskmelon (Cucumis melo) has been investigated for its cognition enhancing effects by evaluation of inhibitory activities on acetylcholinesterase, a degrading enzyme of acetylcholine, a brain neurotransmitter, and ${\beta}$- secretase, which forms the ${\beta}$-amyloid toxic protein from its precursor protein. A passive avoidance task, one of the animal model experiments for learning and memory, was also performed. As a result, the melon extract showed 15.8% and 35.3% inhibition on acetylcholinesterase and ${\beta}$-secretase, respectively, with a final concentration of 100 mg/ml. In the animal model test, melon extract significantly (p<0.05) lengthened the step-through latency time by 22.7% compared to the control group, suggesting that melon extract has, indeed, an effect on cognition enhancement.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.11
• /
• pp.1805-1810
• /
• 2007

Purple nonsulfur bacteria were isolated from river sediments and their growth promoting capabilities on tomato were examined. Isolated strains KL9 and BL6 were identified as Rhodopseudomonas spp. by 16S rDNA sequence analysis. Rhodopseudomonas strain KL9 maximally produced 5.56 mM/min/mg protein and $67.2\;{\mu}M/min/mg$ protein of indole-3-acetic acid (IAA) and 5-aminolevulinic acid (ALA), respectively, which may be one of the mechanisms of plant growth enhancement. The germination percentage of tomato seed, total length, and dry mass of germinated tomato seedling increased by 30.2%, 71.1%, and 270.8%, respectively, compared with those of the uninoculated control 7 days after inoculation of strain KL9. The lengths of the root and shoot of germinated seedling treated with 3 mM tryptophan, a precursor of IAA, increased by 104.4% and 156.5%, respectively, 7 days after inoculation of strain KL9. Rhodopseudomonas KL9 increased 123.5% and 54% of the root and shoot lengths of germinated seedling, respectively, treated with 15 mM glycine and succinate, precursors of ALA. This plant growth promoting capability of purple nonsulfur bacteria may be a candidate for a biofertilizer in agriculture.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.233-233
• /
• 2006

[ $Y_{2}O_{2}S:Eu$ ], a red phosphor, coated with silica nanoparticles or nanocomposites composed of silica nanoparticles and polymeric materials such as PMMA and PVP was prepared via sol-gel process. Samples were prepared from four different methods coded P1, P2, P3, and P4. P1 includes a conventional sol-gel process and a dip-coating method while P2 has the same procedure with P1 except that nanocomposites containing both silica nanoparticles and polymer prepared by sol-gel process were used as coating materials. In P3 method, phosphors were dispersed in a solution containing silica precursor, i.e., TEOS and then polymerization was performed to coat onto the phosphors surface while P4 followed the same procedure with P3 except that a solution containing both TEOS and organic monomer were used in preparing coating materials. Among various coating methods examined in this study, uniform coating of phosphor could be achieved by using method P4, i.e., phosphor surface coating in a solution containing hydrophobic monomer and TEOS. Furthermore, $Y_{2}O_{2}S:Eu$ red phosphor coated with nanocomposite composed of PMMA matrix and silica nanoparticles exhibited enhanced PL intensity and long-term stability.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.12
• /
• pp.3437-3442
• /
• 2014

A well-known carbazole-based precursor (probe 1) was used for the detection of cysteine/homocysteine and fluoride. Probe 1 shows a "turn-on" response to cysteine/homocysteine and fluoride via enhancement in emission intensity at 442 nm and 462 nm respectively, in solutions and living cells. Furthermore, probe 1 behaves as a fluorescent molecular switch between cysteine/homocysteine and fluoride as the chemical inputs, which have been used for the development of a combinatorial logic circuit and a molecular keypad lock.

• Current Photovoltaic Research
• /
• v.6 no.1
• /
• pp.12-16
• /
• 2018

The interest in perovskite solar cells has been skyrocketed owing to their rapid progress in efficiency in recent years. Here, we report the effect of non-stoichiometry in the methylammonium lead trihalide ($MAPbI_3$) precursors used in a solution process with different MAI : $PbI_2$ ratios of 1 : 0.96, 1 : 1.10, 1 : 1.15, and 1:1.20. With an increase in the $PbI_2$ content, the $PbI_2$ secondary phase was found to form at grain boundary region of perovskite thin films, as evidenced by X-ray diffraction (XRD) and scanning electron microscopy (SEM). In terms of device performance, open-circuit voltage in particular is significantly improved with increasing the molar ratio of $PbI_2$, which is possibly ascribed to the reduction in recombination sites at grain boundary of perovskite and hence the prolonged life time of light-generated carriers according to the reported. As a result, the $PbI_2-excess$ devices exhibited a higher power conversion efficiency compared to the MAI-excess ones.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.2
• /
• pp.27-32
• /
• 2020

Robust and hydrophobic tetraethoxysilane (TEOS) based silica aerogel was synthesized by supercritical alcohol drying with surface modification using the phenyl based silica co-precursor (PTMS). The aerogels were synthesized by hydrolysis and polycondensation reaction in which TEOS and PTMS in methanol were reacted together in presence of oxalic acid and ammonium hydroxide as the catalysts. Supercritical alcohol dried PTMS/TEOS composite silica aerogel were examined for the hydrophobicity, chemical interaction, surface morphology, and textural characteristics. The hydrophobic silica-based aerogels were characterized by Fourier transform infrared spectroscopy to investigate the presence of functional groups and chemical bonds. The prepared silica demonstrates hydrophobicity (76°-149°), a high specific surface area (398 ㎡/g to 739 ㎡/g). The present investigation provides a simple approach to synthesize hydrophobic and thermally stable silica aerogels.