• Archives of Plastic Surgery
• /
• v.45 no.4
• /
• pp.298-303
• /
• 2018

Flap thinning is a procedure for making a thick flap thinner. This procedure does more than simply fill in the defected area, and it is better for reconstructing the area both functionally and aesthetically. However, because flap thinning is a rather blind procedure, it may have harmful effects on flap vascularity. Therefore, the vasculature of a flap must be understood before performing flap thinning. This paper analyzes the basic anatomy underlying flap thinning based on the previous anatomic study that categorized flaps into 6 types by their vascular structures. This paper also reviews specific studies of frequently practiced flap procedures (deep inferior epigastric artery perforator flap, thoracodorsal artery perforator flap, and anterolateral thigh flap) and presents important precautions for flap thinning procedures. Finally, this paper briefly examines the axiality of the subdermal plexus, which needs to be taken into account when performing flap thinning.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.940-948
• /
• 2000

Noise and vibration generated at construction sites become serious issues because of bigger construction projects and growing use of heavy equipment. Especially in downtown construction, noise and vibration easily exceed the legal standards that can suffer the most of surrounding residents. The number of complaints by the residents who are exposed to the noise increases as their consciousness grows. However, the Korean regulations for the construction noise and vibration only present the overall limits for target areas and times zones, and this make it difficult to take effective measures. Also in rural area, disputes between construction sites and residents arise, but the dispute resolution or taking measures are difficult because clear standards concerning cause-and-effect, estimation of effective levels, calculation of damages, and future precautions and examples lack. This paper describes legal standards regarding the noise and vibration and presents judging standards for the physical damages. This paper also introduces example public complaints that happened at Daewoo construction sites to describe the problems in the existing law and further to enable smooth construction progresses by emphasizing the seriousness of public complaints.

• Journal of Chest Surgery
• /
• v.25 no.6
• /
• pp.605-610
• /
• 1992

Improving intraoperative and postoperative myocardial protection and better construction and design of valvular prosthesis has reduced the mortality of MVR. But, ventricular rupture after MVR occurred occasionally and represented a potentially lethal complication. Transverse midventricular disruption presented as refractory myocardial failure immediately on termination of bypass or later often on initial period of good hemadynamics. From Jan., 1985 through Dec., 1991 131 MVRs were performed as isolated or combined procedures. Rupture of the posterior wall of left ventricle was observed in 2 patients. There were 2 type III ruptures Prevention is of utmost importance, and by taking certain precautions, the chance of ventricular rupture can be reduced. Repair should always be done by patch technique in the aid of the use of cardiopulmonary bypass with cardioplegic arrest. When the laceration is in the middle of the posterior left ventricle, external repair with the pericardial patch can be attempted first.

• Journal of electromagnetic engineering and science
• /
• v.17 no.4
• /
• pp.228-232
• /
• 2017

The radiation properties and fabrication precautions of a 3D printed, electrically small folded spherical meander wire monopole antenna are investigated. The antenna is self-resonant and shows sufficiently high radiation efficiency at an electrical size ka of 0.4, with the radiation quality factor Q approaching the lower physical bound. In antenna fabrication, the possible structural deformation due to gravity is examined before the antenna frame is 3D-printed. The required conductivity is achieved by multiple manual paintings of a silver paste. The radiation efficiency and pattern show very good agreement with the computed expectations, whereas the resonant frequency deviates by 11.8%. The method to minimize such a fabrication error when using 3D printing technology for wire antennas is discussed.

• Progress in Superconductivity and Cryogenics
• /
• v.17 no.4
• /
• pp.1-7
• /
• 2015

This paper addresses technical problems of thermal contact conductance or resistance which inevitably occurs in most cryogenic engineering systems. The main focus of this paper is to examine what kind of physical factors primarily influences the thermal contact resistance and to suggest how it can be minimized. It is a good practical rule that the contact surface must have sub-micron roughness level with no oxide layer and be thinly covered by indium, gold, or Apiezon-N grease for securing sufficient direct contact area. The higher contact pressure, the lower the thermal contact resistance. The general description of this technique has been widely perceived and reasonable engineering results have been achieved in most applications. However, the detailed view of employing these techniques and their relative efficacies to reduce thermal contact resistances need to be thoroughly reviewed. We should consider specific thermal contact conditions, examine the engineering requirements, and execute each method with precautions to fulfil their maximum potentials.

• Journal of Korean Physical Therapy Science
• /
• v.1 no.1
• /
• pp.195-202
• /
• 1994

The following are suggested joint distraction and gliding techniques for use by entry level therapists and those attempting to gain a foundation in joint mobilization. A variety of adaptations can be made from these techniques. The distraction and glide techniques should be applied with respect to the dosage, frequency, progression, precautions, and procedures as described in this section. Basic concepts of joint mobilization were presented, including definitions of terminology and the two grading systems. Joint mobilization techniques are one part of a total treatment for decreased function. Therapy should also include appropriate range of motion, strengthening, and functional techniques.

• The Academic Congress of Korean Shoulder and Elbow Society
• /
• 1995.05a
• /
• pp.20-20
• /
• 1995

American football is currently played in 29 Universities in Korea, It is a contact sport where injuries are inevitable. This study was undertaken to determine the incidence and the anatomical distribution of injury based on evaluation of Yonsei University American football team. A total 74 injuries was reported among 77 players Knee, ankle and hand were vulnerable to injury. Operations were performed on $9(12.2\%)$ of the injuries. Catastrophic injuries can occur in this sport, but none has happened in Yonsei University team during the 20 years for which the sports has been practised. The frequency of injuries and their profile resemble those in US-based studies so it is suggested that the precautions and preventive measures recommended in the USA should be applied and followed in Korea.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.173-174
• /
• 2018

Recently, a growing number of accidents have taken place at construction sites, causing serious casualties. To prevent accidents or minimize damage, it is necessary to develop the safety precautions education is essential. However, the effects of safety education do not have as much effect as the importance of safety education. so As a new direction, we are looking forward to effective education by simulating realistic environments using VR. The safety training method used to experience and learn dynamic situations in a limited room wearing HMD is combined with VR. It will be the start of the construction industry going forward.

• Proceedings of the Safety Management and Science Conference
• /
• 2012.04a
• /
• pp.461-470
• /
• 2012

Fire scene is mostly destroyed by the flames but fire fighter's fire suppression and rescue activities also destroys a substantail portion. Structures and furnitures which has already become weaken can be easily damaged. Or when structures built up by moving to another location, it's very hard to restore the original state. Also if it is restored, the object has no evidence that it has existed. In all scenes, the scene can't be preserved when quick extinguishment, rescue activities and preventation of fire spread is needed. On this paper, it reviewed the notes about the possibility of field damage by fire suppression and rescue squad's activities. Also it has reviewed the notes how to minimize the field damage by putting out fires and rescue activities by observing the precautions. The reviewed information will help to make guidelines for preserving the scene. By this, it is expected to make a field study exactly by collecting more valid evidence.

• Nuclear Engineering and Technology
• /
• v.6 no.1
• /
• pp.27-35
• /
• 1974

A neutron sensitive ionization chamber has been successfully developed by an improved technique for reactor instrumentation. This instrument is 50mm in diameter and 87cm in length, and can yield a current of 14$\mu$A when in a neutron flux of around 10$^{9}$ nv. The normally required voltage is +350v. The instrument may be removed from operating flux and disassembled immediately without special precautions from radiation.