Browse > Article
http://dx.doi.org/10.9714/psac.2015.17.4.001

Review : Thermal contact problems at cryogenic temperature  

Jeong, Sangkwon (Cryogenic Engineering Laboratory, Department of Mechanical Engineering, KAIST)
Park, Changgi (Cryogenic Engineering Laboratory, Department of Mechanical Engineering, KAIST)
Publication Information
Progress in Superconductivity and Cryogenics / v.17, no.4, 2015 , pp. 1-7 More about this Journal
Abstract
This paper addresses technical problems of thermal contact conductance or resistance which inevitably occurs in most cryogenic engineering systems. The main focus of this paper is to examine what kind of physical factors primarily influences the thermal contact resistance and to suggest how it can be minimized. It is a good practical rule that the contact surface must have sub-micron roughness level with no oxide layer and be thinly covered by indium, gold, or Apiezon-N grease for securing sufficient direct contact area. The higher contact pressure, the lower the thermal contact resistance. The general description of this technique has been widely perceived and reasonable engineering results have been achieved in most applications. However, the detailed view of employing these techniques and their relative efficacies to reduce thermal contact resistances need to be thoroughly reviewed. We should consider specific thermal contact conditions, examine the engineering requirements, and execute each method with precautions to fulfil their maximum potentials.
Keywords
thermal contact resistance; conduction cooling; interstitial material; indium; Apiezon-N grease;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 E. Gmelin, M. Asen-Palmer, M. Reuther, R. Villar, "Thermal boundary resistance of mechanical contacts between solids at sub-ambient temperatures," Journal of Physics D: Applied Physics, vol. 32, pp. R19, 1999.   DOI
2 A. Tariq, M. Asif, "Experimental investigation of thermal contact conductance for nominally flat metallic contact," Heat and Mass Transfer, pp. 1-17, 2015.
3 P. Misra, J. Nagaraju, "Thermal gap conductance at low contact pressures (<1 MPa): Effect of gold plating and plating thickness," International Journal of Heat and Mass Transfer, vol.53, pp. 5373-5379, 2010.   DOI
4 J. Yu, A.L. Yee, R.E. Schwall, "Thermal conductance of Cu/Cu and Cu/Si interfaces from 85 K to 300 K," Cryogenics, vol.32, pp. 610-615, 1992.   DOI
5 M.S. Kim, Y.S. Choi, "Thermal Contact Resistance Measurement of Metal Interface at Cryogenic Temperature," Korean Journal Of Air-Conditioning and Refrigeration Engineering, vol.26, pp. 32-37, 2014.   DOI
6 E.T. Swartz, R.O. Pohl, "Thermal boundary resistance," Reviews of Modern Physics, vol.61, pp. 605-668, 1989.   DOI
7 K. Chen, S. Song, D. Xue, "Vapor-phase crystallization route to oxidized Cu foils in air as anode materials for lithium-ion batteries," CrystEngComm, vol.15, pp. 144-151, 2013.   DOI
8 I. Platzman, R. Brener, H. Haick, R. Tannenbaum, "Oxidation of Polycrystalline Copper Thin Films at Ambient Conditions," The Journal of Physical Chemistry C, vol.112, pp. 1101-1108, 2008.   DOI
9 T. Ogden, Thermal conductivity of hard anodized coatings on aluminum, 23rd Joint Propulsion Conference, American Institute of Aeronautics and Astronautics, 1987.
10 L.J. Salerno, P. Kittel, A.L. Spivak, "Thermal conductance of pressed metallic contacts augmented with indium foil or Apiezon grease at liquid helium temperatures," Cryogenics, vol.34, pp. 649-654, 1994.   DOI
11 R.L. Schmitt, G. Tatkowski, M. Ruschman, S. Golwala, N. Kellaris, M. Daal, J. Hall, E.W. Hoppe, "Thermal conductance measurements of bolted copper joints for SuperCDMS," Cryogenics, vol.70, pp. 41-46, 2015.   DOI
12 M. Bahrami, M.M. Yovanovich, J.R. Culham, "Thermal contact resistance at low contact pressure: Effect of elastic deformation," International Journal of Heat and Mass Transfer, vol.48, pp. 3284-3293, 2005.   DOI
13 B.B. Mikic, "Thermal contact conductance; theoretical considerations," International Journal of Heat and Mass Transfer, vol.17, pp. 205-214, 1974.   DOI
14 R.F. Barron, Cryogenic systems, 2nd ed., Clarendon Press, 1985.
15 G. Ventura, L. Risegari, The art of cryogenics: low-temperature experimental techniques, Elsevier, 2010.
16 Z. Cheng, L. Liu, S. Xu, M. Lu, X. Wang, "Temperature Dependence of Electrical and Thermal Conduction in Single Silver Nanowire," Scientific Reports, vol.5, pp. 10718, 2015.   DOI
17 M.M. Yovanovich, "Effect of foils on joint resistance: evidence of optimum thickness," AIAA Pap, pp. 227-245, 1972.
18 Indium Corporation, "Metal thermal interface materials," 2015, http://www.indium.com/TIM