• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.446-452
• /
• 2020

In this paper, we propose a energy-saving LED module using K-band microwave motion detecting sensor. To oscillate K-band microwave signal, An oscillator using a hairpin-type microstrip resonator was designed to increase stability and make fabrication easier. To radiate the microwave signal, a two-channel(TX/RX) patch antenna arrays was developed. Wilkinson power divider and ring hybrid mixer were developed and applied to obtain Doppler shift from the received signal. Shield cans were installed to protect the stability of the signals and unwanted external noise. The proposed motion detection sensor was mounted on a demonstration LED module and the energy saving performance through pre-test was verified.

• Journal of the Korean Magnetics Society
• /
• v.5 no.3
• /
• pp.165-170
• /
• 1995

NMR measurement has been studied for protons in pre-polarized flowing water by a separated detector working at high field far away from the measured field region where the transition of protons is occurred by the pertur-bation of RF energy. The conditions for NMR signal were optimized on the amplitude and frequency of modulation field, the RF field of detector, water speed, and RF field at the measured field region. The NMR signal with the full width of 320 nT at the half maximum in Lorentzian curve and with signal to noise ratio of 10.5 was measured in the range from a few ${\mu}T$ to mT, and its shape and amplitude were independent of the measured field intensity and its uniformity.

• Journal of Welding and Joining
• /
• v.19 no.1
• /
• pp.40-48
• /
• 2001

An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

• The Journal of the Korea Contents Association
• /
• v.4 no.2
• /
• pp.1-6
• /
• 2004

This paper proposes on the acoustic signal processing blocking method of Internet pornographicl sites by calculating correlation values between prototype acoustic signals and input acoustic signals. Pre-existing blocking methods mainly focused on directory-based bled(fin and pornographic related words-based blocking. But these methods are not completely blocked the Internet harmful pornographicl sites by several situations. For this, this paper proposes the content-based blocking method which composes of the image-based blocking and the acoustic-based blocking. This paper, mainly, deals with the acoustic -based blocking method. Finally, the effectiveness of this system is demonstrated by several experiments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.5 no.1
• /
• pp.40-45
• /
• 2004

This paper presents the parallel distributed control scheme for shaping of the bent glass. The designed system consists of a PC, a main controller and 11 servo-controllers, the precision motion controllers. Each elements are connected by using RS-232C and 8-bit data bus. In order to guarantee the stability and the control performance, we use a precision PID motion controller and a H-bridge on the servo-drivers. PC calculates position values of 11 DC motors by using the pre-determined curvature value and offers the user interface environment operator. The main controller provides the control instructions and parameter values to 11 servo-controllers by chip enable signal, simultaneously. Using the received commands and parameter values, the servo-controllers control the positions of the DC motors based on PID control scheme.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.6
• /
• pp.1527-1534
• /
• 2010

The conventional peptide modification process of guanidination, in which the amino groups of lysine residues are converted to guanidino groups using O-methylisourea to create more basic homoarginine residues, is often used to improve the signal intensity of lysine-containing peptides in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). Here, we used three different protease enzymes (trypsin, Lys-C, and Glu-C) to evaluate the effects of guanidination on the MS signals of two enzymatically digested proteins. Horse heart myoglobin and bovine serum albumin were guanidinated either before or after digestion with trypsin, Lys-C, or Glu-C. The resulting peptides were subjected to MALDI-MS, and signal intensities and sequence coverage were systematically evaluated for each digest. Guanidination prior to Glu-C digestion improved sequence coverage for both proteins. For myoglobin, guanidination before enzymatic digestion with trypsin or Lys-C also enhanced sequence coverage, but guanidination after enzymatic digestion enhanced sequence coverage only with Lys-C. For albumin, guanidination either before or after Glu-C digestion increased sequence coverage, whereas pre- or post-digestion guanidination decreased sequence coverage with trypsin and Lys-C. The amino acid composition of a protein appears to be the major factor determining whether guanidination will enhance its MALDI-MS sequence coverage.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.379-382
• /
• 2017

Shipping and logistics safety, security system is strengthening worldwide, the development of shipping and logistics safety security core technology for national security logistics system construction has been carried out. In addition, it is necessary to localize the Array Detection System, which is a core component of the container search machine, to cope with the 100% pre-inspection of the container scheduled for 2018 in the United States. In this paper, we propose a test software program developed by using TI-RTOS (Texas Instruments - Real Time Operating System) with a test digital signal processing board which is developed self development.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.687-695
• /
• 2005

A bandpass sampling technique, which is a method directly downconverting a bandpass signal to a baseband or a low IF signal without analog mixers, can be an alterative choice for the SDR system to minimize the RF front-end. In this paper, a complex bandpass sampling technique for two bandpass-filtered signals is proposed. We derived generalized formulae for the available sampling range, the signal's IF and the minimum sampling frequency taking into consideration the guard-bands for the multiple RE signals. Thru the simulation experiments, the advantages of the . complex bandpass sampling over the pre-reported real bandpass sampling are investigated for applications in the SDR design.

• Proceedings of the IEEK Conference
• /
• 2000.11d
• /
• pp.187-190
• /
• 2000

In this paper, implementation of speech Recognizer system, Separated from Personal computer. By using DSP, this intends to extend the voice recognizing, limited into PC because of amount of data and calculations. For this performance The thesis uses the real time End point detector and organizes no additional device between human and the system, characteristic vector are that detects End point and voice from absolute energy and ZCR, that uses 12 difference Cepstrum from LPC, that uses the method to compensate the process of pattern separating and pre-calculated standard pattern limitation.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.193-196
• /
• 2000

An stereophonic acoustic echo canceller cannot exactly estimate the echo path in the receiving room, because of the cross-correlation between stereo signals. In this paper, the new preprocessing filter is proposed to reduce the cross-correlation between the signals without influence on stereophonic sound. Two channel signals are linearly decorrelated by using orthogonality principles and the attenuated absolute values of the decorrelated signals are added to each channel input signals. Assuming that the power of each channel signal is larger than that of the cross-correlation, computational burden is reduced.