• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2007년도 춘계학술대회논문집
• /
• pp.368-379
• /
• 2007

To investigate the dying properties of the extracts from different parts of Neolitsea sericea Koidz on Hanji, the dye materials were prepared from the extraction methods using $1{\ell}$ of hot water and alkaline solution with 40 g of leaves, bark, and wood each. K/S values and H (V/C) values of the Hanji dyed at different pH, temperature, time, and concentration of extract were determined using a spectrophotometer, and the maximum absorption wavelength of the dyed Hanji was 400 nm. From the analyzed data, the optimum dying conditions were pH 5 of dying solution, $70^{\circ}C$ of dying temperature, 40 minutes of dying time, and 100% of dye concentration. The color of dyed Hanji was Y to YR and color R- and RP-type could also be formed from the different treatment conditions. From the dyeing using mordants, amount of the bound dye materials was high in the pre-mordanted Hanji and in Hanji treated with extracts from the leaves. Also, the amount of the bound dye materials in the pre-mordanted Hanji was higher when aluminum and iron mordant was used rather than other mordants. Not likely with this, amount of the bound dye materials in the post-mordanted Hanji was higher when copper mordant was used. In color, Hanji treated extracts from the leaves appeared as Y-type and ones treated with extracts from bark and wood showed YR-type.

• 한국염색가공학회지
• /
• 제22권3호
• /
• pp.194-206
• /
• 2010

This study was carried out to identify the optimum dyeing conditions for maximum dye uptake of Prunus yedoensis Matsumura flower extract on silk fabric and to investigate hue/tone characteristics and fastness properties of the dyed fabrics. As results, the flower extract was found to contain flavonoids by FT-IR and to show yellowish shade by UV-vis spectrum. Silk fabric was optimized for maximum dye uptake to five repetitions of dyeing at $80^{\circ}C$ for 60 min with an extract concentration of 600% owf in terms of both K/S and color differences. Pre-mordanting was more effective to dye uptake than post-mordanting for all of the mordants used. Un-mordanted and pre-mordanted fabric showed YR(Yellow Red) while most of post-mordanted ones did Y(Yellow). Main tones of dyed fabrics were sf(soft) and lt(light) in the case of unmordanting or Al-mordanting whereas they were d(dull) and g(grayish) by post-mordanting with Cu, Cr, and Fe, respectively. The fastness grades to rub and dry cleaning were reasonably good for most dyeing conditions while those to light were poor. Finally dyeing condition for each hue/tone of the dyed silk with the flower extract was optimized considering fastness properties.

• 펄프종이기술
• /
• 제39권2호
• /
• pp.60-67
• /
• 2007

To investigate the dying properties of the extracts from different parts of Neolitsea sericea Koidz on Hanji, the dye materials were prepared from the extraction methods using $1{\ell}$ of hot water and alkaline solution with 40 g of leaves, bark, and wood each. K/S values and H (V/C) values of the Hanji dyed at different pH, temperature, time, and concentration of extract were determined using a spectrophotometer, and the maximum absorption wavelength of the dyed Hanji was 400 nm. From the analyzed data, the optimum dying conditions were pH 5 of dying solution, $70^{\circ}C$ of dying temperature, 40 minutes of dying time, and 100% of dye concentration. The color of dyed Hanji was Y to YR and color R- and RP-type could also be formed from the different treatment conditions. From the dyeing using mordants, amount of the bound dye materials was high in the pre-mordanted Hanji and in Hanji treated with extracts from the leaves. Also, the amount of the bound dye materials in the pre-mordanted Hanji was higher when aluminum and iron mordant was used rather than other mordants. Not likely with this, amount of the bound dye materials in the post-mordanted Hanji was higher when copper mordant was used. In color, Hanji treated extracts from the leaves appeared as Y-type and ones treated with extracts from bark and wood showed YR-type.

• 한국의류학회지
• /
• 제34권3호
• /
• pp.393-400
• /
• 2010

This study examines the mordanting effect and multi functional properties of silk fabrics dyed with onion shell extracts that were mordanted with gallnut. The contents of this study are as follows. First, the optimum dyeing conditions were investigated by measuring the K/S value that depended the on dyeing conditions when silk fabrics were dyed with onion shell extracts. Second, the color, brightness, and chroma differences that appear after mordanting with gallnut were investigated by measuring the K/S and Munsell value. Third, the color fastness and antimicrobial activity were measured. When silk fabrics were dyed with onion shell extracts, the optimum dyeing conditions were a dyeing temperature of $70^{\circ}C$, a dyeing concentration of 160%, and a dyeing of time 30min. After mordanting with gallnut extracts, the K/S value increased remarkably and was larger in pre-mordanting than post-mordanting. The H value displayed yellow-red in all cases of pre and post mordanting. However, the H value was more reddish in the order of non-mordanting

• 패션비즈니스
• /
• 제14권4호
• /
• pp.174-184
• /
• 2010

This research was carried out to find the dyeing properties of Scutellaria baicalensis Georgi on the rayon and cotton fabrics. The best proper dyeing conditions were examined by changing dye concentrations, dyeing temperature, dyeing time, and dyeing repitition. Also dyeability and surface color changes were evaluated by various mordanting methods and agents. The maximum absorption of Scutellaria baicalensis Georgi were at 275nm and 362nm. The optimum dyeing conditions on the cotton were 80%, $80^{\circ}C$, 40minutes, 4 repitition, and those on the rayon were 80%, $80^{\circ}C$, 60minutes, 5 repitition. The K/S values of rayon and cotton fabrics were higher in pre-mordant than post-mordant. The K/S values on the rayons were lower than no mordant fabric except pre-Fe mordant, these on the cotton fabrics were higher than no mordant fabric except post-Al mordant. The value of ${\Delta}E$ was the highest in Fe mordanted fabrics, and higher on the cotton fabric than rayon. The surface colors of all mordanted fabrics were yellow.

• 대한가정학회지
• /
• 제47권1호
• /
• pp.85-91
• /
• 2009

Dyeability and antimicrobial property of dyed pig skin with Coptis chinensis Franch was investigated. Dyestuff was extracted with water and concentrated. Pig skin was dyed and mordanted according to various dyeing temperature, dyeing time, dyestuff concentration, mordanting methods and kinds of mordants. The results of this experiment were as follows: 1. Dyeability of pig skin with Coptis chinensis Franch was best at 200%(owf) dyestuff concentration, 50${^{\circ}C}$ dyeing temperature, and 20min. dyeing time. 2. Pre-mordanting by Cu improved the K/S values of dyed pig skin. 3. Surface color and color difference of dyed pig skin showed various results according to the mordants used : generally their color was yellow, Al post-mordanted pig skin showed the greatest color difference. 4. Color fastness to drycleaning was considerably high in case of staining compared to fading. Fastness to light was improved by Cu-mordanting while other treatments were not effective. 5. Antimicrobial property of samples was not different (99.9%) between untreated and treated.

• 한국염색가공학회지
• /
• 제6권2호
• /
• pp.1-9
• /
• 1994

In order to study the effect of mordanting on silk fabrics treated with tannin, those fabrics were treated with Al, Cu, Cr, Fe, Sn by pre and post mordanting. It was studied about color change, weighting effect, dgree of photodegradation by pre and post mordanting. The results are as fallows ; 1. On the addition of mordants into mimosa and tannic acid solution, &{\lambda}_{max}& of the former was slightly blue-shifted, on the other hand, &{\lambda}_{max}& of the latter was obviously Red-shifted. 2. In case of Cu, Cr, Pre mordanting, weighting effect were appeared. Weighting effect of silk fabrics treated with Tannic acid increased higher than mimosa by mordanting. 3. In color change, Silk fabrics treated with Mimosa and Tannic acid generally changed to red direction and fabrics treated with tannic acid changed to yellow direction by pre and post mordanting. 4. In the photodegradation, the degree of photodegradation on mordanted fabrics increased. Its degree was slack in Cu, Cr, Post mordanting. On the other hand, Al, Fe, Sn were greate. Silk fabrics treated with Mimosa and Tannic acid got inhibiting effect on photodegradation.

• 패션비즈니스
• /
• 제18권4호
• /
• pp.114-124
• /
• 2014

This research was carried out to find the mordant effects by Tara and Myrobalan as natural tannins on the cow leather dyed with Lac powder. The cow leathers were treated with Tara, Myrobalan, Al, Cu, and Fe mordants by changing treatment orders. It was examined for K/S value, surface color changes, and color difference. The K/S value generally has higher Myrobalan than Tara, and pre-mordant than post-mordanted condition. Cu is the strongest among the three mordants. As a results of the treatment order, the K/S value is higer in pre-tannin-mordant agent than in pre-mordant agent-tannin. In the post mordant, K/S value is higher in mordant agent-tannin than in tannin-mordant agent. The color difference and color factors such as H, V and C were various according to the mordant agents, treatment orders and mordant methods; and surface colors of dyed cow leathers were R and RP. It was difficult to find some significant means of mordant orders.

• 한국의류산업학회지
• /
• 제13권5호
• /
• pp.778-789
• /
• 2011

The natural dyeing of silk fabrics with guava leaf extract was investigated. Mixed components of flavonoid and tannin seem to be the components of guava leaf extract. The temperature and time for dyeing of silk fabrics with guava leaf extract were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. The dyeing equilibrium was shown at the fourth time of repeated dyeing. The highest K/S value was recorded at pH 3. Fe-mordanted fabrics showed the highest K/S value. High K/S values were shown in the post-mordanting of dyed fabrics at $40^{\circ}C$ and the pre-mordanting of dyed fabrics at $90^{\circ}C$. After repeated dyeing and mordanting, various color change occurred with mordant treatment. Surface colors were changed to YR color in alkaline water extract and to Y color in acidic water and ethanol extract, respectively. The washing fastness was level 3-4 for Sn-mordanted fabrics and level 4 for Fe-mordanted fabrics, and the dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness was satisfactory with level 3-4. The light fastness was above level 4 only when Fe-mordanting was conducted, and the rest of dyed fabrics was not fast enough. In the antibacterial activity, the powder of guva leaf extract showed 99.9% of high antibacterial activity and Staphylococcus aureus showed 99.6% in dyed fabric. All dyed fabrics showed higher deodorization and UV protection rate than control fabric.

• 한국의류학회지
• /
• 제35권4호
• /
• pp.466-475
• /
• 2011

The dyeing properties of protein fiber with pine needles colorants were studied through an investigation of the effect of dyeing conditions such as dye concentration, dyeing temperatures and time on dye uptakes, effect of mordants, and color change. In addition, the various colorfastness of dyed silk and wool fabrics were evaluated for practical use. The antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. The dye uptake increased as the dyeing concentration increased and this enabled the obtainment of the Langmuir absorption isotherm. The dye uptake increased as the dyeing time and temperature increased. Pine needles colorants showed relatively good affinity to protein fiber and produced a yellow color. Post-mordanting was more effective than the pre-mordanting, and the dye uptake of fabrics improved by mordanting. Except for washing, the colorfastness of dyed fabrics showed a low rating. However, the colorfastness to light and the dry cleaning of fabrics mordanted with N.Cu, and the friction fastness of fabrics mordanted with Cu improved. The guide fabrics showed very good antimicrobial abilities of 99.9%; in addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.