• 한국건축시공학회지
• /
• 제9권5호
• /
• pp.127-133
• /
• 2009

일반적으로 콘크리트를 고강도화 하기 위해서는 결합재의 강도를 증가시키는 것이 중요하다. 그러나 고강도 콘크리트에 사용되는 광물질 혼화재들이 가진 고결현상으로 인해 개별투입 혼합 시에는 분산성이 크게 저하되어 유동성을 저감시키고, 충분한 강도를 발휘하지 못하는 문제가 발생한다. 이러한 문제를 해결하기 위해 각각의 결합재를 사전에 프리믹스하여 콘크리트를 제조하게 되면 광물질 혼화재가 충분히 결합재 중에 분산되어 콘크리트의 유동성 향상 및 강도증진 등에 기여할 수 있을 것으로 기대된다. 따라서 본 연구에서는 W/B $15{\sim}35%$ 범위내에서 프리믹스 시멘트의 효과를 분석하기 위해 결합재의 혼합방법에 따른 고강도 콘크리트의 물성을 분석하였다. 그 결과 유동성은 프리믹스의 균일분산 및 볼 베어링 효과로 인해 개별혼합보다 양호한 결과를 나타내었고, 공기량은 프리믹스의 시멘트 입자간 공극을 실리카퓸의 미세한 입자가 충전하는 마이크로 필러 효과로 인해 개별혼합 보다 약간 감소하였으며, 응결시간은 프리믹스의 균질한 분산이 수화발열속도에 영향을 주어 개별혼합보다 단축되었다. 압축강도는 프리믹스의 공극구조 치밀화로 인하여 증가하였으며, 강도편차 또한 평균적으로 약 1.69 % 정도 변동계수가 감소하는 효과를 나타내었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2007년도 추계 학술논문 발표대회
• /
• pp.37-40
• /
• 2007

This study investigates the effect of the pre-mix cement to the physical properties of the concrete according to the various combinations of the binders and the silica fume types. The results are summarized as following. For the properties of the fresh, the fluidity in the case that OPC+cilica fume-blast-furnace slag is appropriate compared to OPC+cilica fume+fly ash. Expecially, it is favorable when pre-mix is used. The fluidity time of the A, B depending on silica fume types is favorable, but it is decreased on C. The air content depending on silica fume types is low when the fly ash is used. Specially, the air content in the case that pre-mix is used is low caused by the dispersion of the silica fume. For the properties of the hardened concrete, the compressive and flexible strength when the blast-furnace slag is pre-mixed are high, and they exceed OPC. The strength depending on the silica fume types is high on B, and the strength of the others is similar.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.93-97
• /
• 2008

The study analyzed on each kind of basic characteristics in mortar to prove an effect of pre-mix cement, ultra high strength binder. The results were as follows. in characteristics of not set mortar, fluidity time was the quickest at the time of using POBSA and was more delayed at the time of using Fly Ash than at the time of using Blast Furnace Slag as a binder. Mortar ring flow and flow con flow got smaller as fluidity time got longer, on the contrary to fluidity time. Unit capacity mass was smaller at the time of using Fly Ash than at the time of using Blast Furnace Slag. According to pre-mix, it was difficult to discover a regular tendency. In characteristics of hardening mortar, the 28th day compressive strength was better than thing mixed after measuring separately in pre-mix. According to a binder's kind, Silica Fume B, C was better than Silica Fume A.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.172-173
• /
• 2019

In this study, application of ultra high performance concrete(UHPC) with pre-mix binder were presented on civil, architectural and special field. The UHPC can be applied to a variety of site due to its excellent flowability, mechanical properties, impact resistance and fire resistance. It is necessary to apply the pre-mix binder to take into account the productivity and performance improvements of the UHPC.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.199-200
• /
• 2023

This paper presents a study on the selection of optimal mix proportions for producing lightweight pre-foam concrete as a substitute for Autoclaved Lightweight Concrete (ALC) without the accelerated curing. The study was conducted using a rapid hardening binder made from by-products of the steel industry as the primary raw material. The experimental results established the optimal mix proportions, which included retarder content, water/binder ratio, foam content, and fiber inclusion amount, for the production of lightweight foam concrete. The optimal mix proportion was determined to have a retarder content at the minimum amount required to secure the working time, W/B of 35%, a foam content limited to 65% or less, and a fiber inclusion amount of 0.05% or less.

• 한국식품조리과학회지
• /
• 제33권2호
• /
• pp.155-161
• /
• 2017

Purpose: The purpose of this study was to determine the quality characteristics of gluten-free frying pre-mix with insoluble dietary fiber powder (IDFP) from Chinese cabbage by-product. Methods: Frying powder mix was prepared with 0.5, 1.0, 1.5 or 2.0% IDFP. Fried powder mix only whit brown rice powder was used as a control. Spreadability, pick-up ratio and color of batter, texture, moisture and oil contents, oil absorption and sensory evaluation of fried sweet potato were determined. Results: L and a-values of batter decreased with increasing amount of IDFP, whereas b-value increased with IDFP addition. Hardness and crispiness of fried sweet potato increased with IDFP addition until 1.5%. Moisture content of fried sweet potato increased with higher IDFP addition whereas oil content and oil absorption decreased with increasing amount of IDFP. Sensory evaluation of fried sweet potato showed the best results in the 0.5% of IDFP addition group. Conclusion: Overall preference of IDFP samples was significantly higher than that of control. Based on the study, the optimal amount of IDFP for gluten-free fried powder mix was determined to be 0.5-1.5%.

• Tuberculosis and Respiratory Diseases
• /
• 제84권1호
• /
• pp.74-83
• /
• 2021

Background: This study compared the treatment outcomes of patients with multidrug-resistant tuberculosis (MDR-TB) before and after the implementation of public-private mix (PPM). Factors affecting treatment success were also investigated. Methods: Data from culture-confirmed pulmonary MDR-TB patients who commenced MDR-TB treatment at Pusan National University Hospital between January 2003 and December 2017 were retrospectively reviewed. Patients were divided into two groups in terms of PPM status: pre-PPM period, patients who commenced MDR-TB treatment between 2003 and 2010; and post-PPM period, patients treated between 2011 and 2017. Results: A total of 176 patients were included (64 and 112 in the pre- and post-PPM periods, respectively). 36.9% of the patients were resistant to a fluoroquinolone or a second-line injectable drug, or both. The overall treatment success rate was 72.7%. The success rate of post-PPM patients was higher than that of pre-PPM patients (79.5% vs. 60.9%, p=0.008). Also, loss to follow-up was lower in the post-PPM period (5.4% vs. 15.6%, p=0.023). In multivariate regression analysis, age ≥65 years, body mass index ≤18.5 kg/m², previous TB treatment, bilateral lung involvement, and extensively drug-resistant (XDR)- or pre-XDR-TB were associated with poorer treatment outcomes. However, the use of bedaquiline or delamanid for ≥1 month increased the treatment success. Conclusion: The treatment success rate in MDR-TB patients was higher in the post-PPM period than in the pre-PPM period, particularly because of the low rate of loss to follow-up. To ensure comprehensive patient-centered PPM in South Korea, investment and other support must be adequate.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.275-276
• /
• 2018

Ultra high performance concrete(UHPC) represents high early age autogenous shrinkage strain due to its low water-to-binder ratio(W/B) and high fineness admixture usage. It has been reported that fiber can control restrained tensile stress and crack. The purpose of the present study is, therefore, to investigate the autogenous shrinkage as well as mechanical properties including compressive strength, flexural strength and modulus of elasticity on the UHPC with fiber type and pre-mix of binder.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.581-584
• /
• 2004

High ductile fiber reinforced mortar suitable for wet-mix shotcreting (sprayable ductile mortar) 10 the fresh state, while maintaining tensile strain-hardening behavior in the hardened state, has been developed based on micromechanics and workability control. In the development concept of sprayable ductile mortar, micromechanics is adopted to properly select the matrix, fiber, and interface properties to exhibit strain hardening and multiple cracking behaviors in the composites. Within the pre-determined micromechanical constraints, the workability is controlled by optimizing mix proportions. A series of spray tests show the excellent pumpability and sprayability of the sprayable ductile mortar. Subsequent direct tensile tests demonstrate that the tensile performance of sprayed mortar is comparable to that of cast mortar, for the same mix design.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.373-376
• /
• 2008

150MPa 수준의 초고강도 콘크리트를 제조하기 위하여 프리믹스형태의 시멘트를 제조하였고, 각 시멘트의 특성별로 초고강도 콘크리트 배합특성과 재령별 강도발현 특성을 비교하였다. 실험결과 콘크리트의 배합에 소요되는 시간은 콘크리트 각 재료가 충분히 활성화되기까지 대략 5분에서 6분 사이에 콘크리트 믹싱이 완료되는 것으로 나타났다. 콘크리트의 압축강도는 재령 28일을 기준으로 7일에서는 77%, 14일에서는 87%정, 56일에서는 약 102%정도로 나타났으며, 150MPa 정도의 초고강도 콘크리트 제조를 위하여 OPC는 54%내외, 슬래그미분말은 25${\sim}$30%, 실리카흄은 10${\sim}$15% 정도의 범위에서 프리믹스시멘트를 제조하여 콘크리트 배합에 적용할 수 있을 것으로 판단된다. 그리고 초고강도 콘크리트는 매우 큰 점성을 가질 수 있어 이러한 점성과 콘크리트 타설 및 작업과의 상관성을 고려하여 플로우치는 700${\sim}$750mm정도를 확보하여야 할 것으로 판단된다.