• Journal of the Optical Society of Korea
• /
• 제12권4호
• /
• pp.281-287
• /
• 2008

An acousto-optic tunable filter based 3-D micro surface profile measurement using an equally spaced 5 spectral phase shifting is described. The 5-bucket spectral phase shifting method is compared with a Fourier-transform method in the spectral domain. It can provide a fast measurement capability while maintaining high accuracy since it needs only 5 pieces of spectrally phase shifted imaging data and a simple calculation in comparison with the Fourier transform method that requires full wavelength scanning data and relatively complicated computation. The 3-D profile data of micro objects can be obtained in a few seconds with an accuracy of ${\sim}10nm$. The 3-D profile method also has an inherent benefit in terms of being speckle-free in measuring diffuse micro objects by employing an incoherent light source. Those simplicity and practical applicability is expected to have diverse applications in 3-D micro profilometry such as semiconductors and micro-biology.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.325-342
• /
• 2020

The current study is focused on the evaluation of the ultimate strength of stiffened panels found in ship hull structures that are subjected to combined uniaxial thrust, in-plane and out-of-plane bending moments. This loading condition, which is in general ignored when performing buckling checks, applies to representative control geometries (stiffener with attached plating) as a consequence of the linearly varying normal stresses along the ship's depth induced by the hull-girder vertical bending moment. The problem is generalized by introducing a non-uniform thrust described by a displacement ratio and rotation angle and by introducing the slenderness ratios, within the practical range of interest. The formed design space is explored through methods sourcing from Design of Experiments and by applying non-linear finite element procedures. Surrogate empirical models have been constructed through regression analysis and Response Surface Methods. An additional empirical model is provided to the literature for predicting the ultimate strength under uniaxial thrust. The numerical experimentation has shown that is a significant influence on the ultimate strength of stiffened panels as the thrust non-uniformity increases.

• 한국표면공학회지
• /
• 제55권2호
• /
• pp.38-50
• /
• 2022

As a low-cost and high-efficiency electrocatalysts with high performance and stability become a key challenge in the development of the practical use of water electrolysis, there is an intense interest in transition-metal oxalate-based materials. Transition-metal oxalate-based catalysts with excellent electrochemical performances have been widely applied in water electrolysis due to its low-cost and ease of synthesis. This review provides a useful summary on the development of transition-metal oxalate as potential catalysts for water electrolysis with a focus on the structural and compositional alteration, role of oxalate anion, and enhanced electrochemical performances.

• 한국해양학회지:바다
• /
• 제17권4호
• /
• pp.225-242
• /
• 2012

이 연구는 인공위성 고도계로 관측한 해수면 높이 자료를 이용하여 동해 표층해류를 생산하고, 동해 전체 영역에 대하여 동시성 있는 표층해류 분포를 동해 해류 정보 사용자에게 제공하기 위한 최초의 시도이다. 동해 전 영역에서 인공위성 고도계와 연안 조위관측소의 해수면 높이 자료를 동시에 얻을 수 있으므로 준실시간으로 넓은 해역에 대하여 동시성 있는 표층 지형류의 산출이 가능하다. 산출된 동해 표층 지형류로부터 주요 해류의 위치와 세기 그리고 중규모 이상의 소용돌이 발달 양상을 살펴볼 수 있다. 따라서 이들 해류의 이름과 평균적인 위치를 알 수 있도록 동해 해양지명에 대한 명칭과 위치를 기술하고, 개념적인 해류도를 제시하였다. 동해 해류정보가 실제 실용화될 수 있도록 인공위성 고도계 자료를 이용하여 산출한 지형류의 월 계절 연도별 해류 분포 예를 들고, 각 해류 분포를 설명하였다. 또한 시 공간적으로 변화하는 동해 표층해류 분포 형태를 객관적으로 분류하기 위하여 16년(1993~2008년)간의 표층해류 자료를 경험직교함수(Empirical Orthogonal Function, EOF)를 이용하여 분석하였다. EOF분석 제1모드(mode)는 주로 한국 동해안을 따라 북쪽으로 흐르는 동한난류와 야마도분지 남서부 시계방향 순환의 강화 또는 약화를 나타냈다. 제2모드는 동한난류가 동해 남부를 가로지르며 사행하는 정도를 나타냈으며, 해류 사행의 파장은 약 300 km이었다. 제1모드와 제2모드가 모두 해류의 연간 변동성을 나타냈으며, 제1모드와 제2모드의 시간계수에 따라 동해 표층해류 분포를 관성 경계류 패턴(pattern), 대마난류 패턴, 사행 패턴, 외해분지류 패턴으로 분류할 수 있다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.119-119
• /
• 2015

Ion beam sputtering has been widely used in Secondary Ion Mass Spectrometry (SIMS), X-ray Photoelectron Spectroscopy (XPS), and Auger Electron Spectroscopy (AES) for depth profile or surface cleaning. However, mainly due to severe matrix effects such as surface composition change from its original composition and damage of the surface generated by ion beam bombardment, conventional sputtering skills using mono-atomic primary ions with energy ranging from a few hundred to a thousand volts are not sufficient for the practical surface analysis of next-generation organic/inorganic device materials characterization. Therefore, minimization of the surface matrix effects caused by the ion beam sputtering is one of the key factors in surface analysis. In this work, the electronic structure of a $Ta_2O_5$ thin film on $SiO_2/Si$ (100) after Ar Gas Cluster Ion Beam (GCIB) sputtering was investigated using X-ray photoemission spectroscopy and compared with those obtained via mono-atomic Ar ion beam sputtering. The Ar ion sputtering had a great deal of influence on the electronic structure of the oxide thin film. Ar GCIB sputtering without sample rotation also affected the electronic structure of the oxide thin film. However, Ar GCIB sputtering during sample rotation did not exhibit any significant transition of the electronic structure of the $Ta_2O_5$ thin films. Our results showed that Ar GCIB can be useful for potential applications of oxide materials with sample rotation.

• 한국환경복원기술학회지
• /
• 제16권4호
• /
• pp.65-81
• /
• 2013

Urban sprawl has been the limits of traffic accommodate and the supply road. Thus, Light Rail Transit(LRT) has been proposed as the best alternative. Owing to landscape damage from construction of LRT, landscape planning should be considered seriously in the urban planning step. This paper therefore seeks to determine landscape improvement direction of LRT pier. First, the methods in this study shared landscape improvement direction type of LRT pier through previous studies such as planting of surface(30%, 60%, 90% planting of surface), graphic(character, commercial advertising, symbol), and surface treatment type(exposed concrete, white painting, pattern dies). Next, respondent evaluated 3D simulated landscape image accordingly shared types by preference and landscape adjectives using in streetscape evaluation. As a result, visual preference was the highest in planting type of surface and the lowest in the surface treatment type. Covering 60%(4.48) in planting type of surface was the highest. Because it is similar to the golden ratio considering the visual principle, we will need to take advantage through the result of this paper. Also, most landscape improvement direction which satisfied with significant level showed a positive effect from landscape improvement. Comprehensively based on these results, it suggests desirable landscape improvement direction of LRT pier in the city for solution of landscape inhibition problem.

• 한국지반공학회논문집
• /
• 제20권8호
• /
• pp.193-203
• /
• 2004

표면이 거친 강성옹벽의 경우 뒷채움재에서 발생하는 아칭효과로 인해 옹벽에는 비선형의 토압분포가 작용하며, 아칭효과가 비선형의 토압분포에 미치는 영향은 옹벽의 변위 형태에 따라 달라진다. 따라서 강성옹벽에 작용하는 주동토압의 크기와 비선형의 토압분포를 정확하게 산정하기 위해서는 옹벽의 변위형태에 따라 달라지는 뒷채움재에 서 발생하는 실제적 인 파괴면 형상과 아칭효과를 고려해야만 한다. 따라서 본 연구에서는 강성옹벽이 저점을 중심으로 회전하는 경우에 뒷채움재에서의 아칭효과와 비선형의 파괴면 형상을 고려함으로써 비선형의 주동토압을 산정할 수 있는 토압산정식을 제안하였다. 이 과정에서 토압산정식이 수학적으로 복잡해지는 것을 피하기 위하여 뒷채움재에서 발생하는 비선형의 파괴면 형상은 4개의 직선으로 구성되는 가상의 파괴면으로 대체하였다. 그리고 제안식으로부터 구한 예측치를 기존의 모형시험 결과와 비교한 결과 제안식은 만족스런 토압 예측치를 제공하는 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.319-319
• /
• 2011

Hydrolysis of sodium borohydride provides a safe and clean approach to hydrogen generation. Having the proper catalytic support for controlling this reaction is therefore a valuable technology. Here we demonstrate the capability of hydroxyapatite as a novel catalytic support material for hydrogen generation. Aside from being inexpensive and durable, we reveal that Ru ion exchange on the HAP surface provides a highly active support for sodium borohydride hydrolysis, exemplifying a high total turnover number of nearly 24,000 mol $H_2$/ mol Ru. Moreover, we observe that the RuHAP support exhibits a high catalytic lifetime of approximately one month upon repeated exposure to $NaBH_4$ solutions. In addition to examining surface area effects, we also identified the role of complex surface morphology in enhancing hydrolysis by the catalytic transition metal covered surface. Particularly, we found that a polycrystalline RuHAP catalytic support exhibits shorter induction times for the initial bubble formation as well as increased hydrogen generation rates as compared to a single crystal supports. The independent factor of a complex surface morphology is believed to provide enhanced sites for gas release during the initial stages of the reaction. By demonstrating the ability to shorten induction time and enhance catalytic activity through changes in surface morphology and Ru content, we find it feasible to further explore this catalyst support in the construction of a practical hydrogen generator.

• 전기학회논문지
• /
• 제66권12호
• /
• pp.1759-1771
• /
• 2017

In this paper, an improved continuous integral variable structure systems(ICIVSS) with the prescribed control performance is designed for simple regulation controls of uncertain general linear systems. An integral sliding surface with an integral state having a special initial condition is adopted for removing the reaching phase and predetermining the ideal sliding trajectory from a given initial state to the origin in the state space. The ideal sliding dynamics of the integral sliding surface is analytically obtained and the solution of the ideal sliding dynamics can predetermine the ideal sliding trajectory(integral sliding surface) from the given initial state to the origin. Provided that the value of the integral sliding surface is bounded by certain value by means of the continuous input, the norm of the state error to the ideal sliding trajectory is analyzed and obtained in Theorem 1. A corresponding discontinuous control input with the exponential stability is proposed to generate the perfect sliding mode on the every point of the pre-selected sliding surface. For practical applications, the discontinuity of the VSS control input is approximated to be continuous based on the proposed modified fixed boundary layer method. The bounded stability by the continuous input is investigated in Theorem 3. With combining the results of Theorem 1 and Theorem 3, as the prescribed control performance, the pre specification on the error to the ideal sliding trajectory is possible by means of the boundary layer continuous input with the integral sliding surface. The suggested algorithm with the continuous input can provide the effective method to increase the control accuracy within the boundary layer by means of the increase of the $G_1$ gain. Through an illustrative design example and simulation study, the usefulness of the main results is verified.

• Tribology and Lubricants
• /
• 제31권2호
• /
• pp.62-68
• /
• 2015

A magnetorheological (MR) fluid is a smart material whose rheological behavior can be controlled by varying the parameters of the applied magnetic field. Because the damping force and shear force of an MR fluid can be controlled using a magnetic field, it is widely employed in many industrial applications, such as in vehicle vibration control, powertrains, high-precision grinding processes, valves, and seals. However, the characteristics of friction caused by iron particles inside the MR fluid need to be understood and improved so that it can be used in practical applications. Surface process technologies such as polytetrafluoroethylene (PTFE) coatings and diamond-like carbon (DLC) coatings are widely used to improve the surface friction properties. This study examines the friction characteristics of an MR fluid with different surface process technologies such as PTFE coatings and DLC coatings, by using a reciprocating friction tester. The coefficients of friction are in the following descending order: MR fluid without any coating, MR fluid with a DLC coating, and MR fluid with a PTFE coating. Scanning electron microscopy is used to observe the worn surfaces before and after the experiment. In addition, energy dispersive X-ray spectroscopy is used to analyze the chemical composition of the worn surface. Through a comparison of the results, the friction characteristics of the MR fluid based on the different coating technologies are analyzed.