• Korean Journal of Food Science and Technology
• /
• v.24 no.6
• /
• pp.619-622
• /
• 1992

To increase utilization of Korean yam, the rheological properties of gelatinized yam (Dioscorea aimadoimo) starch solutions at various concentrations $(1{\sim}5%)$ and temperature $(30{\sim}60^{\circ}C)$ were investigated. The rheological behavior of gelatinized yam starch solutions was illustrated by power-law model and Casson equation and exhibited pseudoplastic behavior with yield stress. The pseudoplasticity of starch solutions increased largly concentration of starch increased. As the temperature increased from $30^{\circ}C$ to $60^{\circ}C$, the dependency of starch concentration decreased, B were decreased from 0.40449 to 0.39352. The activation energy of flow of gelatinized yam starch solutions were increased from 4.1415 to $5.45329{\times}10^6\;J/kg{\cdot}mol$ by increasing starch concentration from 1% to 5%.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.5
• /
• pp.681-687
• /
• 2020

Physicochemical properties of fucoidan and alginate extracted from Sargassium horneri were investigated. The alginates were extracted and purified via three different routes (CaCl₂, HCl and ethanol routes), and their rheological properties at various concentrations and temperatures were determined. The yield of fucoidan was 3.08%, and it was mainly composed of fucose and galactose. Fourier-transform infrared spectrum of fucoidan showed strong absorption band at 1,254 and 827 cm^-1 corresponding to the sulfate group. Flow behavior of the alginate solution was characterized using the power-law model. The consistency index increased with increasing concentrations. The sodium alginate solution (1.5%) exhibited Newtonian behavior when extracted via the CaCl₂ and HCl routes, while it exhibited pseudoplastic behavior when extracted via the ethanol route. The effect of temperature on the flow behavior was investigated in terms of the activation energy (E_a), which was obtained using the Arrhenius equation. The E_a value corresponding to the alginate solution decreased with increasing shear rates. The E_a values corresponding to the alginate solutions purified via the CaCl₂, HCl, and ethanol routes were 13.54-18.64 kJ/mol, 13.42-19.21 kJ/mol, and 9.51-10.67 kJ/mol, respectively. The low E_a values corresponding to the solutions extracted via the ethanol route suggest that the flow behavior does not depend significantly on temperature.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.12
• /
• pp.1325-1333
• /
• 2011

An analytical, numerical, and experimental comparison of the hydraulic and thermal performance of new vascular channels with semicircular cross sections was conducted. The following conditions were employed in the study: Reynolds number, 30-2000; cooling channels with a volume fraction of the cooling channels, 0.04; and pressure drop, $30-10^5$ Pa. Three flow configurations were considered: first, second, and third constructal structures with diameters optimized for hydraulic operations. To validate the proposed vascular designs by an analytical approach, 3-D numerical analysis was performed. The numerical model was also validated by the experimental data, and the comparison results were in excellent agreement in all cases. The validation study against the experimental data showed that compared to traditional channels, the optimized structure of the cooling plates could significantly enhance heat transfer and decrease pumping power.

• Steel and Composite Structures
• /
• v.34 no.4
• /
• pp.511-524
• /
• 2020

In this research, a simple four-variable trigonometric integral shear deformation model is proposed for the static behavior of advanced functionally graded (AFG) ceramic-metal plates supported by a two-parameter elastic foundation and subjected to a nonlinear hygro-thermo-mechanical load. The elastic properties, including both the thermal expansion and moisture coefficients of the plate, are also supposed to be varied within thickness direction by following a power law distribution in terms of volume fractions of the components of the material. The interest of the current theory is seen in its kinematics that use only four independent unknowns, while first-order plate theory and other higher-order plate theories require at least five unknowns. The "in-plane displacement field" of the proposed theory utilizes cosine functions in terms of thickness coordinates to calculate out-of-plane shear deformations. The vertical displacement includes flexural and shear components. The elastic foundation is introduced in mathematical modeling as a two-parameter Winkler-Pasternak foundation. The virtual displacement principle is applied to obtain the basic equations and a Navier solution technique is used to determine an analytical solution. The numerical results predicted by the proposed formulation are compared with results already published in the literature to demonstrate the accuracy and efficiency of the proposed theory. The influences of "moisture concentration", temperature, stiffness of foundation, shear deformation, geometric ratios and volume fraction variation on the mechanical behavior of AFG plates are examined and discussed in detail.

• Composites Research
• /
• v.12 no.2
• /
• pp.53-61
• /
• 1999

A failure criterion must be considered in each failure mode and loading condition to provide easy determining strength parameters, flexibility and rational simplicity. In this study, new failure criterion was developed by introducing equivalent strength under biaxial loading of tension and torsion. The experimental results showed that the equivalent biaxial strength has a power law relation with respect to a parameter, cos($tan^{-1}R_b$). Failure strength under biaxial loadings could be predicted as a function of tensile strength, torsional strength and biaxial ratio. The scattering of experimental data could be predicted using a Weibull distribution function and the concept of equivalent biaxial strength. Also, in this study, a fatigue theory was developed based on a plane stress model which enabled the S-N curve for combined stress states to be predicted from the S-N data for uniaxial loading. The prediction models can be predicted a biaxial strength and fatigue life of general laminated composite naterials under multi-axial loadings.

• Structural Engineering and Mechanics
• /
• v.66 no.3
• /
• pp.353-368
• /
• 2018

In this work, a high order hyperbolic shear deformation theory with four variables is presented to study the vibratory behavior of functionally graduated plates. The field of displacement of the theory used in this work is introduced indeterminate integral variables. In addition, the effect of porosity is studied. It is assumed that the material characteristics of the porous FGM plate, varies continuously in the direction of thickness as a function of the power law model in terms of volume fractions of constituents taken into account the homogeneous distribution of porosity. The equations of motion are obtained using the principle of virtual work. An analytical solution of the Navier type for free vibration analysis is obtained for a FGM plate for simply supported boundary conditions. A comparison of the results obtained with those of the literature is made to verify the accuracy and efficiency of the present theory. It can be concluded from his results that the current theory is not only accurate but also simple for the presentation of the response of free vibration and the effect of porosity on the latter.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.389-392
• /
• 2015

We identify a strong lensing galaxy in the cluster IRC 0218 that is spectroscopically confirmed to be at z = 1.62, making it the highest-redshift strong lens galaxy known. The lens is one of the two brightest cluster galaxies and lenses a background source galaxy into an arc and a counterimage. With Hubble Space Telescope (HST) grism and Keck/LRIS spectroscopy, we measure the source redshift to be $z_S=2.26$. Using HST imaging, we model the lens mass distribution with an elliptical power-law profile and account for the effects of the cluster halo and nearby galaxies. The Einstein radius is $^{\theta}E=0.38^{+0.02{\prime}{\prime}}_{-0.01}$ ($3.2^{+0.2}_{-0.1}kpc$) and the total enclosed mass is $M_{tot}(<^{\theta}_E)=1.8^{+0.2}_{-0.1}{\times}10^{11}M_{\odot}$. We estimate that the cluster environment contributes ~ 10% of this total mass. Assuming a Chabrier IMF, the dark matter fraction within $^{\theta}E$ is $f^{Chab}_{DM}=0.3^{+0.1}_{-0.3}$, while a Salpeter IMF is marginally inconsistent with the enclosed mass ($f^{Salp}_{DM}=-0.3^{+0.2}_{-0.5}$).

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.349-353
• /
• 2001

Korea has a variety of favorable conditions for utilizing wind as energy. First of all, as a geographical characteristic, it is a peninsular country with its three frontiers surrounded by sea. Such a location makes the country influenced, all the year round, both by sea winds and by seasonal winds, so that it has a good possibility of putting its rich wind resources to use as an energy source. Particularly, in view of the results of observations and analysis of actual data about wind sources, it is quite possible to build wind paver plants in many regions across the country, such as inhabited islands dotted on its southern and western coasts around the Korean peninsular, a number of uninhabited islets attached the main islands, large-scaled reclaimed lands, and major inland areas. In Korea, the attempt to develop the technology of wind paver generation started in the 1970's. It was since 1988, when the Law on the promotion of Alternative Energy Development was enacted, that research and development activities for employing the wind force as a part of energy source have got into full swing. At that moment, however, due to the low level of domestic technological development, such efforts were mainly focused on the attainment of basic technologies with regard to wind power generation. Recently, there have been many noticeable changes in the international as well as domestic environments, such as the conclusion of the International Climate Treaty and the increase in public concerns of natural environment. It is quite possible to predict that the demand for wind paver generation will increase in the near future. Therefore, recognizing that wind, as a clean energy source, can be a promising method for coping with the International Climate Treaty and for replacing the fossil fuel, oil, this essay investigates the development history of wind paver generation systems and the status of technological development in Korea and presents an appropriate model for the development of the paver generation system that can compete with other energy sources.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.349-354
• /
• 2006

This study analyzed the fluid state around a container crone according to a wind direction when a wind load was applied to a container crone. The container crane for this research is a model of a 50-ton class used broadly in the current ports. The dimension of an external fluid field set up diameter, 300m, height, 200m. This study considered the change of a wind velocity according to an altitude in a criterion of a wind velocity, 50m/s, applying a power series law. An incident angle applied to an interval of 30 degrees in $0^{\circ}{\sim}180^{\circ}$ and this study carried out a computation fluid dynamics using a CFX-10. In this study, we indicate the wind pressure according to the height and section figure of each member. In addition, we suggest the wind pressure accordint to a wind direction. And we will analyze the structure stability of a container crone from the fluid-ductile analysis in the next study.

• Journal of the Korean Society for Precision Engineering
• /
• v.1 no.3
• /
• pp.85-94
• /
• 1984

The WILDHABER-NOVIKOV gear, one of the circular arc gears, has the large contact area between the convex and concave profiled mating teeth, moves from one end of the tooth to the other axially making a face contact. Hence it provides a large load capacity than the Involute gear and still satisfying the law of gearing. In order to analyze the gear stress, a photoelastic investigation was carried out. Photo elastic model of the WILDHABER-NOVIKOV gears were made of Araldite CT200 in this investigation. For both the many teeth gear and the few teeth gear segments, External gears of all addendum type WILDHABER-NOVIKOV gear and the involute gear were tested. Included were the models with various profile raddi at the same pressure angle 20 .deg. and module 13.5. The flank stresses and fillet stresses of these gears were observed in each case and compared with those of gears. From this investigation, the following results were obtained. A. In the case of having many teeth gear: As the profile radius is increased, the fillet stresses of the WILDHABER-NOVIKOV gear become the same or less than that of the INVOLUTE gea, and the flank stress becomes smaller than that of the INVOLUTE gear. Therefore the better design condition is satisfied with a large profile radius. B. IN the case of having a few teeth gear: As the profile radius is increased the flank stress of WILDHABER-NOVIKOV gear becomes smaller than that of the INVOLUTE gear, but the fillet stresses become larger than that of the INVOLUTE gear. Therefore the larger design condition is satisfied with small profile radius.