• Journal of the Korea Society of Computer and Information
• /
• v.20 no.4
• /
• pp.77-85
• /
• 2015

Recently, wireless sensor network(WSN) have been used in various fields to implement ubiquitous computing environment. WSN uses small, low cost and low power sensors in order to collect information from the sensor field. This paper proposes a clustering algorithm for energy efficiency of sensor nodes. The proposed algorithm is based on conventional LEACH, the representative clustering protocol for WSN and it prolongs network and nodes life time using sleep technique and changable transmission mode. The nodes of the proposed algorithm first calculate their clustering participation value based on the distance to the neighbor nodes. The nodes located in high density area will have clustering participation value and it can turn to sleep mode. Besides, proposed algorithm can change transmission method from conventional single-hop transmission to multi-hop transmission according to the energy level of cluster head. Simulation results show that the proposed clustering algorithm outperforms conventional LEACH, especially non-uniformly deployed network.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2010

Sensor nodes used in Geosensor network are resource limited and power constrained. So it is necessary to research on routing protocols to gather data by using energy efficiently. Wireless sensor networks collect data gathered from sensor nodes by transfering it to the sink using multihop. However, it has two problems. First, the existing works require unnecessary data transmission for choosing a proper parent node to transfer data. Secondly, they have a large number of data transmission because each sensor node has a different path. To solves the problems, we, in this paper, propose a designated path based data aggregation scheme for efficient energy management in WSNs. The proposed scheme can reduce unnecessary data transmission by pre-determining a set of paths and can enable all the sensor nodes to participate in gathering data by running them in round-robin fashion. We show from performance analysis that the proposed scheme is more energy efficient than the existing directed diffusion(DD) and the hierarchical data aggregation(HDA).

• Journal of KIISE
• /
• v.42 no.10
• /
• pp.1268-1279
• /
• 2015

In order to manage a large number of devices connected to the Internet of Things (IoT), the Internet Engineering Task Force (IETF) proposed the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). The route of the RPL network is generated through the use of an Objective Function (OF) that is suitable for the service that is required for the IoT network. Since the route of the RPL network is conventionally simply chosen only by considering the link quality between the nodes, it is sensible to seek an OF that can also provide better Quality of Service (QoS). In previous studies, the end-to-end delay might possibly be sub-optimal because they only deal with problems related to the reduction of energy consumption and not to the link quality on the path to the sink node. In this study, we propose a scheme that reduces the end-to-end delay but also gives full consideration to both the quality on the entire route to the destination and to the expected lifetime of nodes with bottlenecks from heaped traffic. Weighting factors for the proposed scheme are chosen by experiments and the proposed scheme can reduce the end-to-end delay and the energy consumption of previous studies by 20.8% and 10.5%, respectively.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.207-212
• /
• 2015

The sensor network that is component of the Internet of Things require a lot of research to select the best route to send information to the anchor node, to collect a number of environment and cost efficient for communication between the sensor life. On the sensor network in one of the components of IOT's environment, sensor nodes are an extension device with low power low capacity. For routing method for data transmission between the sensor nodes, the connection between the anchor and the node must be accurate with in adjacent areas relatively. Localization CA (Centroid Algorithm) is often used although an error frequently occurs. In this paper, we propose a range-free localization method between sensor nodes based on the Radical Line in order to solve this problem.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.57-65
• /
• 2007

The overlay multicast that has been recently presented as IP alternative for the IP multicast has been getting much persuasion by the computing power of the hardware and the advancement of the network techniques to enforce Routing in application-level. In an overlay multicast, the system resource and the network bandwidth must be utilized efficiently to service real-time HDTV images. Specifically, the system must consider the delay and the jitter that can be incurred at the application-level. In this paper, we implement a server and a client to broadcast HDTV, in the session composed by the existing overlay multicast protocol. The broadcasting server performs the service using a TV tuner, An HDTV camcorder, and files, clients constituting a multicast group relay the received data to other clients. At this time, the information that the clients report periodically, including their delay and the network state, to the server is used as an important information to maintain an overlay session. The implementation is based on the DirectX and its performance is evaluated by the LAN test bed that has been set.

• Journal of KIISE:Databases
• /
• v.37 no.3
• /
• pp.137-145
• /
• 2010

Wireless sensors play important roles in various areas as ubiquitous computing is generalized. Depending on applications properties, each sensor can be equipped with limited computing power in addition to general function of gathering environment-related information. One of main issues in this environment is to improve energy-efficiency in sensor nodes. In this paper, we devise a new attribute-query processing algorithm. Each sensor has to maintain partial information locally about attributes values gathered at its all descendent nodes. As the volume is higher, however, the maintenance cost also increases. And the update cost also has to be considered in the proposed algorithm. Thus, some bits, AVB(Attribute-Value Bits), are delivered instead of the value itself, where each bit represents a bound of attribute. Thus, the partial information can decrease the number of exchanged messages with a little cost during query processing. Through simulation works, the proposed algorithm is analyzed from several points of view.

• Journal of IKEEE
• /
• v.25 no.4
• /
• pp.591-597
• /
• 2021

This paper proposes an EMC-aware PCB design method to reduce electromagnetic emission, where trace length and teturn path of critical signal are shortened by changing chip location and trace layout on the PCB, while additional filters or decoupling capacitors are not required. In the proposed method, signal velocity is calculated for various signals on the PCB. Critical signal with the fastest signal velocity is determined and its return path is shortened as much as possible by placing chip location and trace routing first. Return path of critical signal should be carefully designed not to have discontinuity. Power plane and ground plane should be carefully designed not to be divided, since these planes are the reference of return path. The proposed method was applied to automotive directional Bluetooth speaker which failed to pass CISPR 32 and CISPR 25 EMC tests. Its PCB was redesigned based on the proposed method and it easily passed the EMC tests. The proposed method is useful to EMC-sensitive electronic equipments.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.12
• /
• pp.56-63
• /
• 2012

The WBAN technology means a short distance wireless network which provides each device interactive communication by connecting devices inside and outside of body. Standardization on the physical layer, data link layer, network layer and application layer is in progress by IEEE 802.15.6 TG BAN. Wireless body area network is usually configured in energy efficient using sensor and zigbee device due to the power limitation and the characteristics of human body. Wireless sensor network consist of sensor field and sink node. Sensor field are composed a lot of sensor node and sink node collect sensing data. Wireless sensor network has capacity of the self constitution by protocol where placed in large area without fixed position. Mobile sink node distribute energy consumption therefore network life time was increased than fixed sink node. The energy efficient is important matter in wireless body area network because energy resource was limited on sensor node. In this paper we proposed cluster topology algorithm for efficient data transmission in wireless body area network based mobile sink. The proposed algorithm show good performance under the advantage of grid routing protocol and TDMA scheduling that minimized overlap area on cluster and reduced amount of data on cluster header in error prone wireless sensor network based on mobile sink.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.5
• /
• pp.1020-1030
• /
• 2016

This paper propose an improving relay node selection method for node-to-node connectivity. This concern with the mobility and analysis of deployed for masking operation using highest connectivity node. The major of Delay Tolerant Network (DTN) routing protocols make use of simple forwarding approach to transmit the message depend on the node's mobility. In this cases, the selection of the irrelevant mobile node induced the delay and packet delivery loss caused by limiting buffer size and computational power of node. Also the proposed algorithm provides the node connectivity considering the mobility and direction select the highest connectivity node from neighbor node using masking operation. From the simulation results, the proposed algorithm compared the packet delivery ratio with PROPHET and Epidemic. The proposed Enhanced Prediction-based Context-awareness Matrix(EPCM) algorithm shows an advantage packet delivery ratio even with selecting relay node according to mobility and direction.

• Journal of Internet Computing and Services
• /
• v.10 no.5
• /
• pp.41-47
• /
• 2009

Routing through a backbone, which is responsible for performing and managing multipoint communication, reduces the communication overhead and overall energy consumption in wireless sensor networks. However, the backbone nodes will need extra functionality and therefore consume more energy compared to the other nodes. The power consumption imbalance among sensor nodes may cause a network partition and failures where the transmission from some sensors to the sink node could be blocked. Hence optimal construction of the backbone is one of the pivotal problems in sensor network applications and can drastically affect the network's communication energy dissipation. In this paper a distributed algorithm is proposed to generate backbone trees through robust multi-hop clusters in wireless sensor networks. The main objective is to form a properly designed backbone through multi-hop clusters by considering energy level and degree of each node. Our improved cluster head selection method ensures that energy is consumed evenly among the nodes in the network, thereby increasing the network lifetime. Comprehensive computer simulations have indicated that the newly proposed scheme gives approximately 10.36% and 24.05% improvements in the performances related to the residual energy level and the degree of the cluster heads respectively and also prolongs the network lifetime.