• 한국정보전자통신기술학회논문지
• /
• 제1권2호
• /
• pp.7-11
• /
• 2008

로컬 레벨의 표준화 및 시스템간의 상호운용성을 높이기 위하여 공기조화설비 제어 계통도를 지하층(8포인트)과 기준층(15포인트)으로 구분하여 설계하고 전력선통신으로 제어 네트워크를 구축하였다. 공기조화 시스템의 각 디바이스는 개방형 프로토콜인 뉴런 C로 프로그램 하였다. 연구 결과 $L_{ON}W_{ORKS}$ 프로토콜로 각 디바이스들의 자율분산제어가 가능하게 되었고 통신선의 길이와 회선수를 감소시킬 수 있었다.

• 정보학연구
• /
• 제8권3호
• /
• pp.25-33
• /
• 2005

This paper describe a method for measuring line impedance as a function of frequency for an energized powerline in normal operation. A small sinusoidal signal of a powerline communication utility frequency 30khz$\sim$1Mhz band is continuously injected into the line, and a implemented impedance analyzer calculates the indoor powerline channel impedance from the measured magnitude and phase of resulting voltage and current. The impedance measurement is executed over a range of frequencies to produce a wideband impedance versus frequency characteristic. Implemented impedance analyzer can analysis powerline communication environments measuring line impedance due to load caused in indoor. And measured analysis information through the database can use to evaluate performance of modem and to decide test environment standard.

• 정보학연구
• /
• 제6권4호
• /
• pp.81-91
• /
• 2003

본 논문은 가정내 설치되어 있는 전력선을 이용한 스마트 홈 구축에 적합한 9.6Kbps 전력선 통신 시스템 구현에 관한 것이다. 제안한 전력선 통신 시스템은 가변 감쇄 특성과 가전기기에 의해 발생되는 각종 잡음들, 그리고 각종 가전기기 접속에 의한 임피던스 특성 변화등에 강한 신호 방식으로 100KHz~200KHz 대역 확산 주파수와 선형형태의 Chirp 신호를 사용하였다. 전력선통신 환경과 유사한 의사 부하 망을 제작하여 구현한 시스템에 대한 성능 실험을 하였다. 실험결과 의사 부하망 환경에서의 통신은 매우 만족하게 이루어졌으며, 구현된 Chirped-SS 방식의 9.6Kbps전력선 통신 시스템이 스마트 홈 구축에 있어서 상용화 할만한 성능을 가짐을 확인할 수 있었다.

• 한국정보통신학회논문지
• /
• 제9권4호
• /
• pp.792-797
• /
• 2005

본 논문에서는 전력선 통신과 조광 기술을 기반으로 에너지 절약과 적정 조도의 제어가 가능한 조명제어 스위치의 개발에 대하여 기술하였다. 개발된 스위치는 범용의 마이크로프로세서와 주변 전자기술을 이용하며, 하나의 마이크로프로세서로 전력선 통신과 조광기능을 구현함으로서 저가격 상용화가 가능하였다. 캐리어 주파수는 전송 데이터 길이와 신호감쇄를 고려하여 250kHz로 설정하였다. 저압선로에서 시제작품에 대한 시험결과, 본 스위치는 전력선의 길이와 부하용량의 변동에 대해 강인하게 동작하는 것을 확인하였다.

• 한국정보통신학회논문지
• /
• 제14권11호
• /
• pp.2419-2422
• /
• 2010

현재 선박용 통신 네트워크의 구성은 RS-422, RS-485, CAN, EtherNet 기반의 물리계층으로 NMEA0183, NMEA2000, MiTS(Maritime information Technology Standards) 프로토콜을 지원하도록 설계하고 있다. 특히, 기존의 선박통신은 별도의 전용선을 설치해야하는 단점이 있다. 그러나, 기존의 통신방식과 달리 전력선 통신은 선박내부에서 사용하고 있는 AC220V /DC24V을 그대로 사용하는 장점이 있다. 그러므로, 본 논문에서는 이러한 물리계층을 지원하도록 선박내부의 전력선 통신망을 설계하여 NMEA0183 프로토콜을 지원하는 DC-전력선 통신(DC-PLC : DC-Power Line Communication) 기반의 브릿지를 설계하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제23권3호
• /
• pp.234-239
• /
• 2010

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nanocrystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electromagnetic simulation in this study. Communication speed of 14 Mbps in 600 meter communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.439-440
• /
• 2008

An inductive coupler, which feeds communication to the electric power transmission line, is required to establish Power Line Communication(PLC). The electro-magnetic property of magnetic core and design technology for coupler are very important to manufacture an inductive coupler for power transmission line. The magnetic core with superior electro-magnetic property was manufactured by using nano-crystalline alloy and an inductive coupler, which can operate at the maximum 2,000 A current, was designed and manufactured by establishment of current saturation, signal out winding, and electro-magnetic simulation in this study. Communication speed of 14 Mbps in 600 m communication distance of the real electric power transmission line was obtained by using the inductive coupler and application possibility of the inductive coupler for the electric power transmission line was certified.

• 산업기술연구
• /
• 제18권
• /
• pp.431-437
• /
• 1998

In this paper, we presented a modeling of the power line channel and a new digital communication system over the channel. Firstly, we proposed a new tranceiver structure with DS-CDMA spread spectrum technique and convolutional coder and block interleaver against severe noisy power line environment. Also, QPSK modulation technique was used to get bandwidth efficiency. And then we performed a simulative evaluation of the system using MATLAB communication/simulink toolbox. According to the simulation results, the proposed system gives $10^{-6}$ BER at 20dB SNR.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.299-303
• /
• 2005

A lighting control switch, extended to incorporate a power line communication technology, is developed. The system uses not an exclusive microprocessor but a general one, and developed PPM protocol. The coupling circuit is a type of an isolation LC filter, and the impedance of the circuit was designed as low as possible to extend signal transmission distance. The frequency of the carrier, considering the data length and signal attenuation as the length of power lines, was set at 250 kHz. Tests on a prototype in an indoor power lines have shown that the switch has a stable operation with the distance of power lines

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권6호
• /
• pp.678-684
• /
• 2005

In this Paper telemetering system for home automation is Proposed and implemented. Proposed and developed systems are composed with a home server and a few clients which send metering data of gas electric power water and home security to home server using power line communication. Management computer located in office of apartment complex collects all kinds of measured home data from each home server with multi drop communication by UDP Protocol A simple ASK method is used for power line communication Collected data from each home can be used for issuing the bill of each house and web service. The experiments were carried out under laboratory environment using various kinds of electric home appliances to ascertain the performance.