• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2B
• /
• pp.139-147
• /
• 2012

This study is derived relationships of the resistance coefficients of Darcy-Weisbach and Manning for flow resistance and the dimensionless velocity using many field measurements for 1,875 rivers consist of sand 179, gravel 992, cobble 651 and boulder 53 channels in natural rivers, respectively. The relationships of power law forms are developed as a function of flow discharge, friction slope, and relative submergence by the regression and the semi-empirical method. The measurements distribution of Manning resistance coefficients by the Box-Whisker Plots show the values which ranges from 0.004~0.151 for sand, 0.008~0.250 for gravel, 0.015~0.327 for cobble, 0.023~0.444 for boulder in natural rivers, respectively. Relationships of these semi-empirical and resistance coefficients will be useful to give information in hydraulic engineering.

• 한국지구과학회:학술대회논문집
• /
• 2010.04a
• /
• pp.79-79
• /
• 2010

이 연구는 북한지역의 풍력 자원을 조사하기 위한 사전 연구로 30년간의 북한 지역의 27개 지상 관측소의 풍속 (고도 10 m)을 수집하였다. 이 풍속을 고도 50 m로 환산하였으며, 풍속의 확률밀도함수를 Weibull 함수로 가정하여 분석하였다. 30년 동안의 지상 관측 자료를 바탕으로 볼 때, 대체적으로 황해도 해안지역과 개마고원지역에서 평균 풍속이 북한 전역에서의 평균 풍속 4.0 m/s 보다 큰 지역이 나타났다. 따라서, 해안지역에서 바람 자원이 풍부함을 알 수 있었다. 지역의 차이는 있으나, 봄철 동안의 주풍은 북서풍과 남풍계열이 대등하게 나타나고 있으며, 여름은 남풍계열의 바람이 주풍으로 변하며, 가을과 겨울 동안 북서풍 계열이 주된 바람이었다. 고도 80 m 에서 풍속이 5 m/s 이상 지속되는 기간이 연간 30% 이상인 주요 6지점 중 장진을 제외한 나머지 네 곳은 해안에 위치함을 알 수 있다. 북한 지역 내륙의 중심부인 장진에서 연간 평균풍속 4.7 m/s 이상으로 관측 되었다. 이 지역은 개마고원 일대로 낭림산맥과 함경산맥의 두줄기가 만나는 곳으로 산맥에 의해 뒤쪽이 막혀있어 바람이 집중되어 높은 풍속을 나타낸 것으로 보인다. 또한 이 지역은 고원지대에 위치하여 북쪽에서 고도 1 km 이상에서 강하게 불어오는 북서풍의 영향으로 풍속이 높게 나타나는 것으로 보인다. 이 연구에서 사용한 관측자료는 단순히 지상의 풍속과 풍력으로만 분석한 것이므로 몇 가지 제약성을 가지고 있어 추후 보강이 필요하다. 관측지점의 지리적 위치나 주변의 환경에 따라 풍황의 변화가 크게 달라질 수 있으므로, 북한의 지형적인 요인을 고려한 정확한 실측을 통해 정확도를 높이는 풍력 자원 조사가 뒷받침 되어야 한다. 이 연구의 가치는 30년간의 바람 자료를 이용하였기 때문에 북한 지역에서의 풍황을 보는데 중요한 정성적 자료로 쓰여질 수 있으리라 본다. 또한, 이 자료를 바탕으로 풍력에너지 발전의 후보지 선정에 유용하게 활용되기를 기대하며, 더 나아가 두 나라 간에 에너지 교류가 활발히 이루어지기를 바란다.

• Journal of computational fluids engineering
• /
• v.6 no.2
• /
• pp.22-31
• /
• 2001

The two-dimensional unsteady incompressible viscous flow behind rectangular bluff bodies between two parallel plates was analyzed numerically. The steady state flow and the vortex flow behind rectangular bluff bodies in the channel were investigated for two regimes i.e., the laminar(Re = 100, 300, 500) and the turbulent flows(Re = 10⁴∼10/sup 6/). The vortex shedding was generated by a physical disturbance(6%) numerically imposed at the rear of the bluff bodies for a short time. It was observed that the perturbed flow became periodic after a transient period. And in the case of unsteady inflow, the sinusoidal pulsatile flow was applied as the inlet condition in the turbulent flow of Reynolds number of 1.0×10/sup 5/. FLUENT code was employed to solve the problems. The power-law scheme was used to get stable linearized equations and the PISO algorithm was applied to finding the solution of them.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.7
• /
• pp.561-568
• /
• 2008

The quality of the automatic transmission shift for a wheel loader has been generally evaluated by driver's perception. However the subjective evaluation of the drivers is not always directly related to the shift quality. It is necessary to set up the method for an objective assessment of the shift quality. In this paper, a quantitative assessment method has been developed for the shift quality of the automatic transmission in a wheel loader. The indices for the evaluation were selected through the various tests like the acceleration and the turbine rpm as well as the subjective evaluation of the driver, and were validated by the correlation between subjective and objective assessments using a psychophysical power law. Based on this method, the shift quality of a wheel loader has been evaluated quantitatively under various shift conditions.

• Journal of Information Technology Applications and Management
• /
• v.23 no.4
• /
• pp.117-125
• /
• 2016

Software reliability in the software development process is an important issue. In infinite failure non-homogeneous Poisson process software reliability models, the failure occurrence rates per fault. can be presented constant, monotonic increasing or monotonic decreasing pattern. In this paper, the reliability software cost model considering decreasing intensity function was studied in the software product testing process. The decreasing intensity function that can be widely used in the field of reliability using power law process, log-linear processes and Musal-Okumoto process were studied and the parameter estimation method was used for maximum likelihood estimation. In this paper, from the software model analysis, we was compared by applying a software failure interval failure data considering the decreasing intensity function The decreasing intensity function model is also efficient in terms of reliability in the arena of the conservative model can be used as an alternating model can be established. From this paper, the software developers have to consider life distribution by preceding information of the software to classify failure modes which can be gifted to support.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.34 no.1
• /
• pp.95-102
• /
• 2006

The PPT being currently developed for the flight model represents a significant leap in techniques and technology compared to the previous flight ones. The electrical energy to be charged in the pulsed plasma thruster (PPT) is a very important aspect to provide an uniform impulse bit ,, and a specific impulse ,, for satellite attitude control. In this paper, we propose a nonlinear control technique and a stability analysis based on the Lyapunov function for the pulsed plasma thruster. Specifically, the proposed control law guarantees to charge and discharge the electrical energy generated from the power processing unit (PPU) within the specified time.

• Korean Journal of Food Science and Technology
• /
• v.19 no.4
• /
• pp.300-304
• /
• 1987

The rheological properties of gelatinized arrowroot stach solution $(4{\sim}7%)$ followed the power law and showed a pseudoplastic behavior at the temperature range of $30{\sim}66^{\circ}C$. The flow behavior index was essentially remained constant at all temperatures, but decreased as starch concentration increased. The consistency index was exponentially increased with the increase of starch concentration. The activation energy of flow of gelatinized starch solution was $4.068{\sim}4.542\;kcal/mole$.

• Korean Journal of Food Science and Technology
• /
• v.34 no.4
• /
• pp.583-589
• /
• 2002

The rheological properties of apple pectins and tomato pectins with different degrees of side branches (sample I and sample II) were investigated with wide range of shear rate by theological modeling. Among the Power law model, Cross model and Carreau model, the Carreau model was the best fitted to the experimental data. Increasing in branching of apple pectins resulted in higher zero-shear viscosity $({\eta}_0)$. But, tomato pectins that have a low degree of side branches were shown litte difference between sample I and sample II. It is concluded that side branches of pectins can result in significant difference in rheological properties. And, this is predicted by the Carreau model.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.27 no.4
• /
• pp.246-257
• /
• 2015

The progressive degradation paths of structures have quantitatively been tracked by using stochastic processes, such as Wiener process, gamma process and compound Poisson process, in order to consider both the sampling uncertainty due to the usual lack of damage data and the temporal uncertainty associated with the deterioration evolution. Several important features of stochastic processes which should carefully be considered in application of the stochastic processes to practical problems have been figured out through assessing cumulative damage and lifetime distribution as a function of time. Especially, the Wiener process and the gamma process have straightforwardly been applied to armors of rubble-mound breakwaters by the aid of a sample path method based on Melby's formula which can estimate cumulative damage levels of armors over time. The sample path method have been developed to calibrate the related-parameters required in the stochastic modelling of armors of rubble-mound breakwaters. From the analyses, it is found that cumulative damage levels of armors have surely been saturated with time. Also, the exponent of power law in time, that plays a significant role in predicting the cumulative damage levels over time, can easily be determined, which makes the stochastic models possible to track the cumulative damage levels of armors of rubble-mound breakwaters over time. Finally, failure probabilities with respect to various critical limits have been analyzed throughout its anticipated service life.

• Journal of Intelligence and Information Systems
• /
• v.17 no.4
• /
• pp.227-240
• /
• 2011

New concepts and ideas often result from extensive recombination of existing concepts or ideas. Both researchers and developers build on existing concepts and ideas in published papers or registered patents to develop new theories and technologies that in turn serve as a basis for further development. As the importance of patent increases, so does that of patent analysis. Patent analysis is largely divided into network-based and keyword-based analyses. The former lacks its ability to analyze information technology in details while the letter is unable to identify the relationship between such technologies. In order to overcome the limitations of network-based and keyword-based analyses, this study, which blends those two methods, suggests the keyword network based analysis methodology. In this study, we collected significant technology information in each patent that is related to Light Emitting Diode (LED) through text mining, built a keyword network, and then executed a community network analysis on the collected data. The results of analysis are as the following. First, the patent keyword network indicated very low density and exceptionally high clustering coefficient. Technically, density is obtained by dividing the number of ties in a network by the number of all possible ties. The value ranges between 0 and 1, with higher values indicating denser networks and lower values indicating sparser networks. In real-world networks, the density varies depending on the size of a network; increasing the size of a network generally leads to a decrease in the density. The clustering coefficient is a network-level measure that illustrates the tendency of nodes to cluster in densely interconnected modules. This measure is to show the small-world property in which a network can be highly clustered even though it has a small average distance between nodes in spite of the large number of nodes. Therefore, high density in patent keyword network means that nodes in the patent keyword network are connected sporadically, and high clustering coefficient shows that nodes in the network are closely connected one another. Second, the cumulative degree distribution of the patent keyword network, as any other knowledge network like citation network or collaboration network, followed a clear power-law distribution. A well-known mechanism of this pattern is the preferential attachment mechanism, whereby a node with more links is likely to attain further new links in the evolution of the corresponding network. Unlike general normal distributions, the power-law distribution does not have a representative scale. This means that one cannot pick a representative or an average because there is always a considerable probability of finding much larger values. Networks with power-law distributions are therefore often referred to as scale-free networks. The presence of heavy-tailed scale-free distribution represents the fundamental signature of an emergent collective behavior of the actors who contribute to forming the network. In our context, the more frequently a patent keyword is used, the more often it is selected by researchers and is associated with other keywords or concepts to constitute and convey new patents or technologies. The evidence of power-law distribution implies that the preferential attachment mechanism suggests the origin of heavy-tailed distributions in a wide range of growing patent keyword network. Third, we found that among keywords that flew into a particular field, the vast majority of keywords with new links join existing keywords in the associated community in forming the concept of a new patent. This finding resulted in the same outcomes for both the short-term period (4-year) and long-term period (10-year) analyses. Furthermore, using the keyword combination information that was derived from the methodology suggested by our study enables one to forecast which concepts combine to form a new patent dimension and refer to those concepts when developing a new patent.