• 한국안전학회지
• /
• 제19권4호
• /
• pp.14-19
• /
• 2004

Boiler is a hazardous equipment to have potential explosion ail the time. And not only it has malfunction at explosion. it lead to people death but also secondary accident such as explosion and fire. Therefore, this equipment should not be broken for keeping its own function. And also, high level of safety should be kept in the process of the use not to be malfunctioned. A large scale of accident due to boiler explosion can be preventive in advance. Boiler fracture is occurred by instant expansion (approximately 1700 time) from quick evaporation of rater in boiler, due to pressure decrease in boiler Emitting energy from it is tremendous and it is so dangerous because of its high temperature. Secondary explosion such as fire is also a main hazard occurring at fuel supply place. If any devices with high pressure is broken, then not only boiler vessel but also components of it are spread with high speed, causing secondary accident. This study is to analyze integrally accident cause of fire and flue tube boiler to have occurred pressure fracture actually, to show countermeasures to prevent accident loss from the fire and flue tube boiler.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.105-112
• /
• 2018

This paper presents results of a compressive investigation conducted on weathered soil stabilized with ground bottom ash (GBA) and red mud (RM). The effects of water/binder ratio, RM/GBA ratio, chemical activator (NaOH and $Na_2SiO_3$) and curing time on unconfined compressive strength of stabilized soils were examined. The results show that the water/binder ratio of 1.2 is optimum ratio at which the stabilized soils have the maximum compressive strength. For 28 days of curing, the compressive strength of soils stabilized with alkali-activated GBA and RM varies between 1.5 MPa and 4.1 MPa. The addition of GBA, RM and chemical activators enhanced strength development and the rate of strength improvement was more significant at the later age than at the early age. The potential environmental impacts of stabilized soils were also assessed. The chemical property changes of leachate from stabilized soils were analyzed in terms of pH and concentrations of hazardous elements. The observation revealed that the soil mixture with ground bottom ash and red mud proved environmentally safe.

• Environmental Analysis Health and Toxicology
• /
• 제14권4호
• /
• pp.217-222
• /
• 1999

Changes in certain fish behaviors are known to be very sensitive indicators of sublethal exposure to environmental contaminants. Therefore, behavioral toxicity tests, if properly designed, can be very useful to assess the influence of hazardous chemicals on fish. However, quantitative analysis of xenobiotic-mediated changes in locomotor behavior in fishes are rare, due mainly to the methodological difficulties. In general, fish movement has been known to be hypertrophic or hypotrophic according to the chemicals. As a study of fish behavioral toxicities, we qualified the swimming movement of Oryzias latipes using computer-automated video tracking system. Oryzias latipes was exposed to cadmium of 128 mg/L for 1 hour in a limited aquaria, then the total swimming distance, the average swimming velocity, the histogram of turning angles, and the turning frequency were analyzed. Fish treated with cadmium showed decreased swimming activities, decreased velocity, and decreased turning frequency, which means hypotrophic activity. From these results, the computer-automated video tracking system of this study seems to be a good tool for the evaluation of the potential ecotoxicological studies.

• Journal of Microbiology and Biotechnology
• /
• 제30권10호
• /
• pp.1525-1535
• /
• 2020

Synthetic dyes are widely used in various industries and their wastage causes severe environmental problems while being hazardous to human health, leading to the need for eco-friendly degradation techniques. The split-gill fungus Schizophyllum commune, which is found worldwide, has the potential to degrade all components of the lignocellulosic biomass and is a candidate for the treatment of synthetic dyes. A systematic molecular analysis of 75 Korean and 6 foreign S. commune strains has revealed the high genetic diversity of this population and its important contribution to the total diversity of S. commune. We examined the dye decolorization ability of this population and revealed 5 excellent strains that strongly decolorized 3 dyes: Crystal Violet, Congo Red and Methylene Blue. Finally, comparison of dye decolorization ability and the phylogenetic identification of these strains generalized their genetic and physiological diversity. This study provides an initial resource for physiological and genetic research projects as well as the bioremediation of textile dyes.

• 터널과지하공간
• /
• 제9권3호
• /
• pp.230-237
• /
• 1999

석회석은 시멘트의 원료로 년간 약 8천만 톤 이상이 주로 강원도와 충북지역에서 채굴되고 있다. 그러나 노천채굴에 따른 환경오염원의 유발과 환경보전의 논리로 개발에 많은 제한을 받고 있다. 최근에는 개발기술이 향상되고 있으며, 개발조건 역시 변화되고 있기 때문에 이에 맞추어 석회석 개발과 관련된 제도 역시 부분적으로 수정, 보완되어야 할 것이다. 따라서 본 연구에서는 환경오염저감을 위한 몇가지 대책과 관련 제도의 부분적인 개정 방안을 제시하였다. 이와 같은 과정을 거처 환경보전과 개발의 조화속에 시멘트 산업의 획기적 발전이 있길 기대한다.

• 대한안전경영과학회지
• /
• 제12권1호
• /
• pp.11-18
• /
• 2010

In the steel industry, steel is manufactured and processed to produce a variety of steel products. The industry provides fundamental materials to the whole range of industries including car, ship, electric appliance and construction industries, so that it is very important as an infrastructure industry. The steel manufacture process involves aerial work, many danger factors caused by the treatment with hazardous gases including BFG and COG and by high pressure gases including $H_2$, $O_2$, $N_2$ and LPG. It requires the management over the large area because many workers work in a plant. The potential dangers in the steel plant were identified and the effect of the danger assessment was verified through the analysis of the danger assessment for the steel plant. The allowed degree of danger was lowered after the improvement through the danger assessment in the plant where the case studies were conducted, which indicates that the danger assessment is highly effective.

• 한국환경과학회지
• /
• 제23권6호
• /
• pp.1067-1074
• /
• 2014

Life Cycle Assessment(LCA) has been carried out to evaluate the environmental impacts of glass bottle recycle. The LCA consists of four stages such as Goal and Scope Definition, Life Cycle Inventory(LCI) Analysis, Life Cycle Impact Assessment(LCIA), and Interpretation. The LCI analysis showed that the major input materials were water, materials, sand, and crude oil, whereas the major output ones were wastewater, $CO_2$, and non-hazardous wastes. The LCIA was conducted for the six impact categories including 'Abiotic Resource Depletion', 'Acidification', 'Eutrophication', 'Global Warming', 'Ozone Depletion', and 'Photochemical Oxidant Creation'. As for Abiotic Resource Depletion, Acidification, and Photochemical Oxidant Creation, Bunker fuel oil C and LNG were major effects. As for Eutrophication, electricity and Bunker fuel oil C were major effects. As for Global Warming, electricity and LNG were major effects. As for Ozone Depletion, plate glasses were major effects. Among the six categories, the biggest impact potential was found to be Global Warming as 97% of total, but the rest could be negligible.

• 한국가스학회지
• /
• 제2권3호
• /
• pp.96-100
• /
• 1998

Chemical plants with high-technological equipments and complex processes are continually increasing potential hazards that may result in huge industrial accidents. If an incident breaks out, it will have a hazardous effect on in-plant workers, neighboring inhabitants or the surrounding environment. Therefore, it is necessary to develop a safety management system that can pre-evaluate the safety and reduce the risk of a chemical plants. The safety management evaluation program developed in this study can implement an effective loss control management in chemical plants. It integrates important lists in safety management lists and legal measures to analyze elements systematically. It also includes incident case analysis and the required components in domestic laws.

• Safety and Health at Work
• /
• 제10권4호
• /
• pp.409-419
• /
• 2019

Although the rare earth elements (REEs) recycling industry is expected to increase worldwide in hightech industry, regulations for worker safety have yet to be established. This study was conducted to understand the potential hazard/risk of REE recycling and to support the establishment of regulations or standards. We review the extensive literature on the toxicology, occupational safety, and health issues, and epidemiological surveys related to the REEs, and propose suitable management measures. REE recycling has four key steps such as collection, dismantling, separation, and processing. In these processes, hazardous substances, such as REEs-containing dust, metals, and chemicals, were used or occurred, including the risk of ignition and explosion, and the workers can be easily exposed to them. In addition, skin irritation and toxicities for respiratory, nervous, and cardiovascular systems with the liver toxicity were reported; however, more supplementary data are needed, owing to incompleteness. Therefore, monitoring systems concerning health, environmental impacts, and safety need to be established, based on additional research studies. It is also necessary to develop innovative and environment-friendly recycling technologies, analytical methods, and biomarkers with government support. Through these efforts, the occupational safety and health status will be improved, along with the establishment of advanced REE recycling industry.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.161-163
• /
• 2012

Recently on Value Engineering(VE) and Life Cycle Cost(LCC) social interests is increasing. The government Turn Key, BTL projects and public works projects, such as VE and LCC Analysis on the value and economic analysis is mandatory. And accordingly the VE and LCC analysis is underway for the various studies. However, there is a problem existing in the LCC analysis. Worth the cost varies according to the flow of time. However, the real interest rate during the LCC analysis of buildings in calculation time for interest rates and inflation are not considering the value of the flow. In other words, a few years using the average value of the deterministic analysis method has been adopted. These costs for the definitive analysis of the cost of an uncertain future, unforeseen changes resulting hazardous value. In this study of the last 15 years interest rates and inflation targeting by using Monte-Carlo Simulation is to perform probabilistic analysis. This potential to overcome uncertainties of the cost of building a more scientific and LCC Estimation of the probability value of the real interest rate is presented.