• Journal of the Korean Institute of Gas
• /
• v.16 no.6
• /
• pp.143-147
• /
• 2012

Photocatalytic properties of $TiO_2$ nanopowders has been received much attention due to their high potentials for environmental applications such as remediation of polluted environments. The $TiO_2$ nanopowders doped with metal or non-metal elements have been synthesized by variety methods such as flame method, chemical vapor synthesis, sol-gel, ion implantation, which affect a doping behavior in different ways resulting in different surface characteristics, leading to different photocatalytic activity. In addition to an effect of synthesis methods, the photocatalytic activity of $TiO_2$ nanopowders can be improved by subsequent heat-treatments. In this study, to obtain a highly efficient photocatalyst, we synthesized $TiO_2$ nanopowders doped with tungsten by the chemical vapor synthesis method (CVS) and determined their physical properties and photocatalytic activity, together with subsequent post-treatment in the range of $300^{\circ}C$ to $700^{\circ}C$.

• The Korean Journal of Zoology
• /
• v.23 no.4
• /
• pp.203-218
• /
• 1980

Unscheduled DNA synthesis, chromosome aberrations, sister chromatid exchanges and DNA replication inhibition induced by the combined treatments with ara-C and UV-light or MMS in $HF_1$, CHO and $HelaS_3$ cells were studied, and the results obtained were as follows: (1) Ara-C was found to inhibit UV-or MMS-induced unscheduled DNA synthesis and the inhibitory effect of ara-C was more remarkable in its post-treatment. (2) Ara-C enhanced the rate of chromosome aberrations induced by MMS or UV-light. Post-treatment with ara-C exhibited the synergistic effect on MMS-induced chromosome aberrations mainly by increases of chromatid deletions. (3) Contrarily, ara-C did not increase the rate of sister chromatid exchanges, particularly in the pre-treatment with MMS, although it was found to induce sister chromatid exchanges. (4) The rate of DNA synthesis was declined immediately after are-C treatment and then recovered. The combined treatments with ara-C and UV-light or MMS showed that the initial response on replication inhibition was similar to that of ara-C, but later responses were similar to that of UV-light or MMS treated group.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.413-418
• /
• 2021

Nano-materials with high effective surface areas have been applied to functional materials, such as high sensitive gas sensors and biosensors and high-efficiency catalytic materials. In this study, titanate sheets with a 3D nano-wall-like structure, high effective surface area, were synthesized vertically to the substrate by a chemical bath deposition (CBD) process using a Ti sheet and urea. The synthesis temperature and synthesis duration time were controlled to the optimal conditions of a 3D nano-wall-like structure in the CBD process. The synthesized ammonium titanate sheets with a 3D nano-wall-like structure were annealed in air to transform to TiO2 with a 3D nano-wall-like structure for various applications. As a result, the optimal temperature in the CBD process for the synthesis of a uniform ammonium titanate sheet with a 3D nano-wall-like structure was 90 ℃. TiO2 with a 3D nano-wall-like structure was obtained from the ammonium titanate sheet with a 3D nano-wall-like structure by annealing above 550 ℃ for three hours. In particular, TiO2 with a 3D nano-wall-like structure with a dominant rutile phase was obtained by post-annealing at 700 ℃. On the other hand, damage to the 3D nano-wall edge was observed after 700 ℃ post-annealing.

• Clinical and Experimental Reproductive Medicine
• /
• v.24 no.1
• /
• pp.35-42
• /
• 1997

The present study was designed to define the role of prostaglandin in the development and hatching of mouse embryo. The effects of indomethacin, an inhibitor of prostaglandin synthesis, on the development and hatching of morula and blastocyst were examined. In early morula stage, embryos were degenerated significantly at 100 ${\mu}M$ and 200 ${\mu}M$ indomethacin. However, the viability of embryos was not influenced by concentration in any other embryonic stages. In all embryonic stages, the hatching was suppressed with concentration dependent manner, but expansion was not suppressed. Particularly, in 84h embryos post hCG injection, the hatching was suppressed significantly compared with post hCG 72h or 96h embryos. When embryos were treated with 100 ${\mu}M$ indomethacin for a specific time (12h) in according to the development stage, the hatching was suppressed all groups. These suppressional effect was decreased as embryonic development stage was progressed. However, the expansion was not affected in all treatment group. This study suggests that hatching-related metabolic substances are synthesized from morula stage and intraembryonic signaling mediated prostaglandin was important for development and hatching of mouse embryo.

• Carbon letters
• /
• v.13 no.4
• /
• pp.191-204
• /
• 2012

Carbon nanotubes (CNTs) have exceptional mechanical, electrical, and thermal properties compared with those of commercialized high-performance fibers. For use in the form of fabrics that can maintain such properties, individual CNTs should be held together in fibers or made into yarns twisted out of the fibers. Typical methods that are used for such purposes include (a) surfactant-based coagulation spinning, which injects a polymeric binder between CNTs to form fibers; (b) liquid-crystalline spinning, which uses the nature of CNTs to form liquid crystals under certain conditions; (c) direct spinning, which can produce CNT fibers or yarns at the same time as synthesis by introducing a carbon source into a vertical furnace; and (d) forest spinning, which draws and twists CNTs grown vertically on a substrate. However, it is difficult for those CNT fibers to express the excellent properties of individual CNTs as they are. As solutions to this problem, post-treatment processes are under development for improving the production process of CNT fibers or enhancing their properties. This paper discusses the recent methods of fabricating CNT fibers and examines some post-treatment processes for property enhancement and their applications.

• Journal of Integrative Natural Science
• /
• v.7 no.4
• /
• pp.241-252
• /
• 2014

A series of N-benzoylated ligands incorporating three different benzoyl groups 2,2'-(benzoyliminodiethylene)-4-substituted phenols ($L^{1,4,7}$), 2,2'-(4-nitrobenzoyliminodiethylene)-4-substituted phenols ($L^{2,5,8}$) and 2,2'-(3,5-dinitrobenzoyliminodiethylene)-4-substituted phenols ($L^{3,6,9}$) were synthesized and characterized by IR, $^1H$ NMR, $^{13}C$ NMR and mass spectroscopy. The In vitro antibacterial activity of investigated ligands were tested against human pathogenic bacteria such as four Gram (-) Enterococcus faecalis, Pseudomonas aeruginosa, Staphylococcus aureus, Vibrio cholera, Vibrio harveyi and two Gram (+) Staphylococcus aureus, Streptococcus mutans. Furthermore, docking studies were undertaken to gain insight into the possible binding mode of these compounds with the binding site of the topoisomerase II (PDB: 4FM9) enzyme which is involved in DNA superhelicity and chromosome seggregation. The N-benzoylated derivatives $L^{5,7,8}$ have significant anticancer activity as Topoisomerase inhibitors. The ligands $L^5$ and $L^8$ were tested for their anticancer activity against human liver adenocarcinoma (HepG2) cell line with the MTT assay.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.6
• /
• pp.364-373
• /
• 2009

In this paper, we suggest the method for constructing parameterized human body model which has any required body sizes from 3D scan data. Because of well developed 3D scan technology, we can get more detailed human body model data which allow to generate precise human model. In this field, there are a lot of research is performed with 3D scan data. But previous researches have some limitations to make human body model. They need too much time to perform hole-filling process or calculate parameterization of model. Even more they missed out verification process. To solve these problems, we used several methods. We first choose proper 125 3D scan data from 5th Korean body size survey of Size Korea according to age, height and weight. We also did post process, feature point setting, RBF interpolation and align, to parameterize human model. Then principal component analysis is adapted to the result of post processed data to obtain dominant shape parameters. These steps allow to reduce process time without loss of accuracy. Finally, we compare these results and statistical data of Size Korea to verify our parameterized human model.

• Macromolecular Research
• /
• v.16 no.6
• /
• pp.532-538
• /
• 2008

Epoxy-based azopolymers were synthesized by the reaction of the diglycidyl ether of bisphenol A (DGEBA) or N,N-diglycidyl aniline (DGA) with disperse orange 3 (DO3) to give poly(DGEBA-co-DO3) or poly(DGA-co-DO3), respectively. Aniline-based azopolymers prepared from poly(DGA-co-An) precursors, synthesized by the reaction of DGA with aniline, were produced by the post-azo coupling reaction with diazonium salts containing various substituents. Holographic gratings were carried out to measure the diffractive efficiencies (DE) for the interference patterns of the $Ar^+$ laser from 50 to $300\;mW/cm^2$ intensity. The shorter repeating unit with higher chromophore density induced deeper surface relief gratings (SRG). Large surface gratings were observed for the aniline-based azopolymers with -COOH substituents, as compared with those for epoxy-based azopolymers. The aniline-based azopolymers with dimerized chromophores and various substituents were also synthesized to observe the effect of chromophore substituents and dimerization on the holography. The dimerized chromophores were more sensitively photoisomerized by the $Ar^+$ laser beam, and demonstrated a larger grating than that with one azo bond.

• Journal of the Korean Chemical Society
• /
• v.63 no.2
• /
• pp.94-101
• /
• 2019

Nb, Mo-doped and Nb/Mo-codoped $VO_2(M)$ nanocrystallites with various doping levels were synthesized for the first time by a hydrothermal and post thermal transformation method. The reversible phase transition characteristics of those doped $VO_2(M)$ was comparatively investigated. Nb-doping of $VO_2(M)$ by this method resulted in a very efficient lowering of the transition temperature ($T_c$) with a rate of $-16.7^{\circ}C/at.%$ that is comparable to W-doping, while Mo-doping did not give a serious reduction of $T_c$ with only a rate of $-5.1^{\circ}C/at.%$. Nb/Mo-codoping gave a similar result to Nb-doping without a noticeable difference. The thin films of Nb-doped and Nb/Mo-codoped $VO_2(M)$ with a thickness of ca. 120 nm were prepared by a wet-coating of the nanoparticle-dispersed solutions. Those films showed a good thermochromic modulation of near infrared radiation with 30-35% for Nb-doped $VO_2(M)$ and 37-40% for Nb/Mo-codoped ones. Nb/Mo-codoped $VO_2(M)$ film showed slightly enhanced thermochromic performance compared with Nb-doped $VO_2(M)$ film.

• Iberoamérica
• /
• v.12 no.2
• /
• pp.383-428
• /
• 2010

To make a critical revision on the inherited social problems throughout the time in Mexico, not always turns out to be easy task, especially when the subject is lent to approach it from diverse perspective, one of them, the educative one. To analyze the low quality of the educative supply is complex subject. One of the maximum profits of institutional revolutionary Mexico was the creation of the Public Education Ministry in 1921. In the post-revolutionary and modern period, the seventies were characterized to be applied to the growth the infrastructure and the fortification of the educative system following the policy of "modernization and development". From the eighties, to lift the quality of the education was considered like one of the specific rules in the strategy of the call "educative revolution". In the nineties, through political programs and agreements, structural changes within the educative system were carried out with the intention to lift the quality of the services. In synthesis, the perspective in the educative policy of Mexico during the last thirty years of century xx, or post-revolutionary period, can be understood, from at least five specific conditions: educative profits in cover, modifications in the educational programs and contents, profits in the political agreements between the agents who take part within the educative system, changes and modifications to the laws applicable to the education, and; the search of the fairness through the compensatory programs. This paper tries to give answer to questions such as: The educative system reflects the ideals of the revolution? The present educative system is the product of a truncated revolution or the fruit of an untimely democracy?