• 한국소음진동공학회논문집
• /
• 제13권12호
• /
• pp.930-937
• /
• 2003

This research deals with how to select connection positions of two substructures to be synthesized. The goal of this research is to find optimal connection positions in order to maximize the fundamental natural frequency of the synthesized structure. The natural frequencies of a connected structure are obtained by modal-force equations. Optimal connection positions can be selected through optimization process. In the optimization process, the natural frequencies of a connected structure are set to object function value and connection positions become design variables. The method described above is applied to synthesis problems of plates, which is initially conducted for FE models and verified through experiments. Especially in experiments. FRF(frequency response function) s are obtained by means of the Modal Testing technique to be used in modal-force equations for synthesizing. Once the substructures are synthesized. the Modal Testing technique is again applied to spot-welded structure using the result from the optimization procedure. It is found that the fundamental natural frequency of the synthesized structure with the optimized result gives higher value than those with the initially given connection positions.

• Communications for Statistical Applications and Methods
• /
• 제14권3호
• /
• pp.561-576
• /
• 2007

Five plotting positions are applied to the computation of probability weighted moments (PWM) on the parameters of the generalized logistic distribution. Over a range of parameter values with some finite sample sizes, the effects of five plotting positions are investigated via Monte Carlo simulation studies. Our simulation results indicate that the Landwehr plotting position frequently tends to document smaller biases than others in the location and scale parameter estimations. On the other hand, the Weibull plotting position often tends to cause larger biases than others. The plotting position (i - 0.35)/n seems to report smaller root mean square errors (RMSE) than other plotting positions in the negative shape parameter estimation under small samples. In comparison to the maximum likelihood (ML) method under the small sample, the PWM do not seem to be better than the ML estimators in the location and scale parameter estimations documenting larger RMSE. However, the PWM outperform the ML estimators in the shape parameter estimation when its magnitude is near zero. Sensitivity of right tail quantile estimation regarding five plotting positions is also examined, but superiority or inferiority of any plotting position is not observed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.65-71
• /
• 2003

This research deals with how to select connection positions of two substructures to be synthesized. The goal of this research is to find optimal connection positions in order to maximize the fundamental natural frequency of the synthesized structure. The natural frequencies of a connected structure are obtained by modal-force equations. Optimal connection positions can be selected through optimization process. In the optimization process, the natural frequencies of a connected structure are set to object function value and connection positions become design variables. The method described above is applied to synthesis problems of plates, which is initially conducted for FE models and verified through experiments. Especially in experiments, FRE(frequency Response function)s are obtained by means of the Modal Testing technique to be used in modal-force equations for synthesizing. Once the substructures are synthesized, the Modal Testing technique is again applied to spot-welded structure using the result from the optimization procedure. It is found that the fundamental natural frequency of the synthesized structure with the optimized result gives higher value than those with the initially given connection positions.

• 디지털융복합연구
• /
• 제12권5호
• /
• pp.231-238
• /
• 2014

텍스트 기반 패스워드 인증의 문제점을 해결하기 위해서 이미지를 사용하는 그래픽 패스워드가 발전 하였다. 기본적으로 그래픽 패스워드는 화면에 보이는 이미지 위의 정확한 점의 위치를 순서대로 선택(클릭)하여 인증을 처리하는 방식이다. 이러한 기존의 그래픽 패스워드 방식은 화면상의 정확한 지점을 선택하여 클릭하지 못하면 인식에 실패한다. 본 논문에서는 이러한 단점을 개선한 신 개념의 그래픽 패스워드 방식인 PassPositions를 소개한다. PassPositions는 지금까지의 그래픽 패스워드 방식에서 사용하지 않았던 상대위치를 패스워드 생성에 사용한 신개념의 그래픽 패스워드 기법이다. PassPositions는 유니버설 디자인에 기반을 둔 그래픽 패스워드 기법으로 사용자의 신체적 조건에 관계없이 모두가 편리하게 사용할 수 있다.

• 음성과학
• /
• 제8권4호
• /
• pp.171-184
• /
• 2001

American English vowels and Korean vowels were compared by the plotformant method. For American English vowels, six General American English speakers pronounced English words in the b_t environment. For Korean vowels eight Kyongsang dialect speakers and eight Seoul dialect speakers pronounced Korean words in the environments of k_t, p_t and t_t. The formant plots were obtained by plotting F1/F2 tokens of 13 American English vowels on the F1xF2 plane. In spite of personal variations the 13 vowel spaces of all six American English speakers maintained their relative positions with some overlaps. Clear distinctions were made between i-I, e-$\varepsilon$, u-$\sigma$, and o-c. The domain of c and $\alpha$ overlapped for three American English speakers, but it did not for three other speakers. The 8 Korean vowel spaces of Kyongsang dialect speakers and Seoul dialect speakers were very similar and maintained their relative positions. No distinction was made between e and $\varepsilon$. In contrast with American English e which is a neutral vowel, Korean e was a back vowel. The comparison of 13 American English vowel positions and 8 Korean Vowel positions is expected to shed some light on the errors of English vowel pronunciation of Korean learners.

• 한국군사과학기술학회지
• /
• 제17권2호
• /
• pp.275-281
• /
• 2014

Although self-propelled artilleries are mobile equipment, they need their own covered-positions for survival against preemptive strikes. The most important military requirement is enough protective capacity against blast pressure caused by explosion. This paper aims to assess the protective capacity of the newly-placed concrete box-type artillery positions using accurate structural geometric models as well as soil-structure interaction analysis. The commercial program is used to model the structural geometry of the positions. In order to describe the correct wave propagation in the backfill along with soil-structure interaction, used parameters in shock equation of state are selected based on the related studies as well as theories and then their final results are verified with the ones calculated with empirical equations in the US Unified Facility Criteria. In sum, it could be concluded that the protective capacity of the newly-built positions satisfies the protective structural requirement.

• 한국해양공학회지
• /
• 제34권5호
• /
• pp.334-341
• /
• 2020

Most towfish systems do not have propulsive devices and cannot compensate for perturbation motion, which can affect the observation data. This paper discusses attitude control of a towfish with elevators on the left and right tail wings to improve the quality of the observational data. Specifically, we investigate the relationships between the towing point, the center of gravity, and the drag forces produced by the elevators to clarify whether the elevators can control the attitude of the towfish sufficiently for various positions of the towing point and center of gravity. The feasible positions of the towing point and center of gravity are defined by mechanical analyses, and simulations are conducted to verify that the elevators can provide attitude control in these positions. The simulation results show that at some positions, the elevators can control the attitude quickly and sufficiently even if disturbances exist.

• Journal of Magnetics
• /
• 제21권4호
• /
• pp.652-659
• /
• 2016

In this study, the efficiencies for both the angular aligned and unaligned positions of the receiver and transmitter coils of wireless power transfer (WPT) systems are examined. Some parameters of the equivalent circuit were calculated with Maxwell 3D software. The analytical solution of the circuit was calculated in MATLAB program through the composition of the system's mathematical modeling. The numerical solution of the system, however, was calculated using PSIM, which is circuit simulation software. In addition, with the use of the finite element method (FEM) in Maxwell 3D software, transient analysis of the three-dimensional system was performed. The efficiency of the system was estimated through the calculation of input and output power. The results demonstrated that power was efficiently transmitted to a certain extent in aligned and unaligned positions. The results also revealed that, for aligned positions, high efficiency with air gaps of 15-20 cm can be obtained and that the efficiency quickly dropped with air gaps of more than 20 cm. For spatially unaligned positions, it was observed that wireless power transfer could be realized with high efficiency with air gaps of up to 10 cm and that efficiency quickly dropped with air gaps of more than 10 cm.

• 품질경영학회지
• /
• 제27권4호
• /
• pp.67-94
• /
• 1999

TQM(total quality management) is accepted as the powerful and holistic management innovation tools in the worldwide corporations since "Malcom Baldrige National Quality Award" model is established by US government. But nowadays, TQM′s roles and positions for the competitiveness is challenged from other many management innovations tools. This paper identifies the TQM′s roles and positions as the sources of sustainable competitive advantages through the examples of Japanese manufacturing corporations which enjoy the strongest positions since 1980′s in world market.

• 약학회지
• /
• 제6권2호
• /
• pp.23-28
• /
• 1962

To reduce the errors, in the microdetermination of carbon and hydrogen, by the electrical automatic combustion apparatus, measured the errors due to the positions of sample in the carbon and hydrogen combustion tube. The samples used are glucose, acetanilide, phenacetin and diazoaminobenzene. Experimented positions of samples were 3cm, 5cm, 7cm, and 9cm from the front edge of the long stationary burner. In this experiment, it was found that the most suitable position of sample in the carbon and hydrogen combustion tube is 8cm from the long stationary burner.