• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.134-142
• /
• 1994

An upper bound elemental technique (UBET) is applied to predict variations of neutral plane and optimal position of the initial billet for rib-wep shaped ring forging. In the analysis, the neutral plane position and velocity fields are determined by minimizing the total power consump- tion with respect to chosen parameters. The degree of die-cavity filling by initial billet-position and the variations of neutral plane by friction condition are investigated. Experiments have been carried out with pure plasticine billets at room temperature. The theoretical predictions of the forging load and the flow pattern are in good agrement with the experimental results.

• YAKHAK HOEJI
• /
• v.39 no.1
• /
• pp.31-35
• /
• 1995

An unusual 10-membered lactone possesing ring-olefin at 7, 8-position has been efficiently synthesized. The $\omega$-hydroxy acid as a cyclization precusor was derived from $\varepsilon$-caprolactone in 41% overall yield of 7 steps and efficiently cyclized by Mukaiyama procedure.

• Advances in nano research
• /
• v.10 no.2
• /
• pp.129-138
• /
• 2021

In present article, utilizing the Love shell theory with volume fraction laws for the cylindrical shells vibrations provides a governing equation for the distribution of material composition of material. Isotopic materials are the constituents of these rings. The position of a ring support has been taken along the radial direction. The Rayleigh-Ritz method with three different fraction laws gives birth to the shell frequency equation. Moreover, the effect of height- and length-to-radius ratio and angular speed is investigated. The results are depicted for circumferential wave number, length- and height-radius ratios with three laws. It is found that the backward and forward frequencies of exponential fraction law are sandwich between polynomial and trigonometric laws. It is examined that the backward and forward frequencies increase and decrease on increasing the ratio of height- and length-to-radius ratio. As the position of ring is enhanced for clamped simply supported and simply supported-simply supported boundary conditions, the frequencies go up. At mid-point, all the frequencies are higher and after that the frequencies decreases. The frequencies are same at initial and final stage and rust itself a bell shape. The shell is stabilized by ring supports to increase the stiffness and strength. Comparison is made for non-rotating and rotating cylindrical shell for the efficiency of the model. The results generated by computer software MATLAB.

• Journal of the Korean Wood Science and Technology
• /
• v.15 no.2
• /
• pp.67-78
• /
• 1987

This study was designed to investigate the effect of board thickness and ring angle on the characteristics including internal check. ring failure, surface check, end check, collapse, thickness shrinkage and width shrinkage of press-drying. The exprimental materials of 6mm-. 9mm- and 12mm-thick board were taken from heartwood and sapwood of oak (Quercus acutissima Carr.) respectively. And boards were numbered according to position in the log(No. 1 to No. 4 for heartwood :md No. 9 for sapwood). Press-drying was at $145^{\circ}C$ platen temperature and 3.5kg/$Cm^2$ platen pressure. The results of this study were summarized as follows. 1. Drying rates for sapwood materials were greater than those for heartwood materials. And drying rates for thinner materials were greater than those for thicker materials. 2. The thinner boards were. the severer surface checking developed in the heartwood materials, and surface checking for heartwood materials had no tendency in board position for the same thickness. Sapwood materials were completely free from surface checking. 3. End checking for heartwood materials had no tendency in board position. The greater deviation of ring angle from perfectly edge-grained was, the severer and checking developed in the sapwood materials. But end checking did not occur in 6mm-thick sapwood materials. 4. The greater deviation of ring angle from perfectly edge-grained was, the severer end checking developed for heartwood and sapwood materials. As board thickness increased, maternal checking developed more severely for heartwood and sapweed materials. 5. For heartwood materials, ring failure, reduced with increasing deviation of ring angle from perfectly edge-grained except 12mm-thick material and showed no significant difference attributable to board thickness. Sapwood materials were completely free from ring failure. 6. For heartwood and sapwood materials, collapse was slight and showed no significant differences attributable to both board thickness and board position. 7. As deviation of ring angle from perfectly edge-grained increased, shrinkage of board thickness decreased for heartwood and sapwood materials. 8. Shrinkage of board width showed no significant differences attributable to both board thickness and board position for heartwood and sapweed materials.

• The KSFM Journal of Fluid Machinery
• /
• v.4 no.3 s.12
• /
• pp.29-38
• /
• 2001

The floating ring seal has the ability of minimizing clearance without the rubbing phenomenon. It is often used in the turbo pump units of liquid rocket engines due to its superior leakage performance. The exact prediction of the lock-up position of the floating ring, the leakage performance, and the rotordynamic coefficients of the seal is necessary to evaluate the rotordynamic performance of the turbo pump unit. The governing equations(which are based on the Bulk-flow Model) we solved by the Fast Fourier Transform method. The lock-up position, leakage flow rate, and rotordynamic coefficients are evaluated according to the geometric parameters of the floating ring seal.

• Korean Journal of Crystallography
• /
• v.11 no.3
• /
• pp.157-161
• /
• 2000

In a 200nm Cz-Si crystal, a macroscopic fluctuation in pulling rate was intentionally introduced an then the variations of the pulling rate and the position of OSF-ring were compared each other. The formation behavior of OSF-ring in the effective volume, defined as the region between the growth interface position -α and the growth interface position +α, is most affected by the pulling rate fluctuation. To understand the correct effect of a macroscopic pulling rate fluctuation, its cumulative effect in the effective volume should be considered. A new concept of modeling for it was proposed here.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.10
• /
• pp.1715-1719
• /
• 2007

New bispsoralen derivatives 5-10, 8-MOP-NHCO(CH2)nCONH-8-MOP (BPSBA-Cn, n = 0, 1, 2, 3, 4 and 5) in which 5 position of an 8-methoxypsoralen (8-MOP) is linked by various lengths of bisamide polymethylene chain to 5 position of the other 8-MOP, have been synthesized by the amidation of 5-amino-8-methoxypsoralen (12) with α,ω-alkanoyl dichloride. Photophysical properties of their derivatives including π?π stacking interaction between the two aromatic moieties were investigated by UV absorption and fluorescence emission spectra. Efficient ring-ring stacking interactions have been observed in BPSBA-C4 (9) from the percent hypochromism (%H) of the models.

• Journal of Technologic Dentistry
• /
• v.30 no.1
• /
• pp.9-15
• /
• 2008

An investigation was carried out to examine the pores of casting bodies depending on the position of wax pattern in the ring for precious alloy by optical micrographs. From the result of optical micrographs, many pores were found in the Group C that wax pattern is placed in the center of the ring. However, any pores were scarcely found in the Group A, B, D and E that wax patterns are placed out of the center of thermal zone. In comparison with the pores of casting bodies of Group C, many pores were found at the cusp area rather than at the proximal surface. From these examination, it was concluded that wax pattern should be placed out of the center of thermal zone to prevent casting boies from occurring pores.

• Archives of Pharmacal Research
• /
• v.14 no.2
• /
• pp.147-159
• /
• 1991

Effects of twenty-one different flavonoids and their related compounds on the phagocytosis of colloidal carbon by macrophages in liver and spleen humoral immune responses against bacterial $\alpha$-amylase and cellular immune responses against oxazolone and dinitrofluorobenzene were studied in vivo and in vitro. It was shown that most of the flavonoids accelerated significantly the phagocytosis, and they suppressed significantly not only humoral and cellular immune responses but also the development of immunological memory after the antigenic stimulation. Especially, malvin was the most active in phagocysis, and disodium cromoglycate and morin were the most active in humoral and cellular immunosuppression, respectively. Daidzuin had the most potent inhibitory activity in the development of memory cells. The structure-activity relationships of the flavonoids in immunosuppression became apparant from these results: 1. The presence of $C_{2-3}$ double bond and $C_4$ Ketone group in C-ring was important for their immunosuppressive activity. 2. Flavonoids with benzene ring at 2 or 3 position in C-ring showed the almost same activities. 3. The opening of C-ring did not affect their immunosuppressive activity. 4. The glycosylated flavonoids at 3 position in C-ring were less less potent than their aglycones. 5. Di-or tri-hydroxylated flavonoids in B-ring were more potent than mono-hydroxylated. 6. Chromanochromanone also had the immunosuppressive activity.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.207-211
• /
• 2004

The performance of an inductive position sensor has approved by previous research papers. In this paper, magnetic circuit model of a ring-type multi-pole insuctive position sensor is described. The magnetic circuit model is required to design in ductive position sensor as well as draw a fault tolerance algorithm. Using the magnetic circuit theory, we derived the relationship between voltage applied and flux density in the normal air-gap. By idealizing the modulation/demodulation processes of signal processing circuit, sensor gain with respect to change of displacement is theoretically calculation using the magnetic circuit model, which validate the theoretical derivation.