• Journal of Navigation and Port Research
• /
• v.37 no.4
• /
• pp.329-335
• /
• 2013

This paper is to develop the position error equations including the attitude errors, the errors of nadir and ship's heading, and the errors of ship's position in the free-gyro positioning and directional system. In doing so, the determination of ship's position by two free gyro vectors was discussed and the algorithmic design of the free-gyro positioning and directional system was introduced briefly. Next, the errors of transformation matrices of the gyro and body frames, i.e. attitude errors, were examined and the attitude equations were also derived. The perturbations of the errors of the nadir angle including ship's heading were investigated in each stage from the sensor of rate of motion of the spin axis to the nadir angle obtained. Finally, the perturbation error equations of ship's position used the nadir angles were derived in the form of a linear error model and the concept of FDOP was also suggested by using covariance of position error.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.1
• /
• pp.55-66
• /
• 1993

The characteristics of the flow processes in the cylinder of the two-stroke cycle engines have become the subject of increasing and attention owing to the simplicity and the higher power per unit weight of the two-stroke cycle engine. Among the many factors which influence on the scavenging flow, the port angle is important factor. Hence, four different type models with one inlet-port and two side-ports are studied to show the effect of port angle on the laminar scavenging flow. When the inlet-port axial is relatively larger than the side-port axial angle, it is showed that the fresh charge penetrate into the burned gas and displace it first toward the cylinder head and then toward the exhaust port. When the inlet-port axial angle is much less than the side-port axial angle, the fresh charge through the inlet-port directly move toward the exhaust port. The result showed that the model A may suppress the generation of vortices in the vicinity of inlet and side prots which restrict the sufficient supply of fresh charge and obstruct the perfect displacement of all combustion products.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.10a
• /
• pp.115-120
• /
• 2006

The rail clamp is the device to prevent the crane slips along rails from the wind blast as well as to locate a container crane in the set position in operating mode. In this study we conduct the research for the sliding distance of rail clamp and the proper position of supporter with respect to the wedge angle in the wedge type rail clamp. The sliding distance to display the clamping force of the jaw pad corresponding to the design wind speed criteria is determined by the total displacement of the rail clamp at the roller center and the wedge angle. And the supporter is the device to prevent the overload which is applied on each part of the rail clamp by wind speed increment, because a clamping force is generated by the sliding of the wedge due to the wind. Accordingly the position of the supporter to prevent the overload is determined by analyzing the forces applied to the rail clamp. In order to analyze the sliding distance and the proper position of supporter with respect to the wedge angle as the wind speed is 40m/s, 5-kinds of wedge angles, such as 2, 4, 6, 8, $10^{\circ}$, were adopted as the design parameter.

• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.611-614
• /
• 2005

This paper is to develop the position error equation of in the free-gyro positioning system by using two free gyros. First, the determination of a position is analyzed on the ellipsoid of the Earth and the type of the errors is defined Finally the position error equation is introduced and developed, based on the definition of the type of errors which may be involved in the FPS.

• Journal of Korean Port Research
• /
• v.14 no.3
• /
• pp.303-312
• /
• 2000

In this paper, we describe an image processing algorithm which is able to recognize the road lane. This algorithm performs to recognize the interrelation between AGV and the other vehicle. We experimented on AGV driving test with color CCD camera which is setup on the top of vehicle and acquires the digital signal. This paper is composed of two parts. One is image preprocessing part to measure the condition of the condition of the lane and vehicle. This finds the information of lines using RGB ratio cutting algorithm, the edge detection and Hough transform. The other obtains the situation of other vehicles using the image processing and viewport. At first, 2 dimension image information derived from vision sensor is interpreted to the 3 dimension information by the angle and position of the CCD camera. Through these processes, if vehicle knows the driving conditions which are lane angle, distance error and real position of other vehicles, we should calculate the reference steering angle.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.1
• /
• pp.1-10
• /
• 1989

Nowadays Hyperbolic Navigation System-LORAN, DECCA, OMEGA, OMEGA-is available on the ocean, and Spherical Navigation System, GPS (Global Positioning System) is operated partially. Hyperbolic Navigation System has the blind area near the base line extention because divergence rate of hyperbola is infinite theoretically. The Position Accuracy is differ from the cross angle of LOP although each LOP has the same error of quantity. GDOP(Geometric Dilution of Precisoin) is used to estimate the position accuracy according to the cross angle of LOP and LOP error. Hyperbola and ellipse are crossed at right angle everywhere. Hyperbola and ellipse are used to LOP in Rectangular Navigation System. The equation calculating the GDOP of rectangular Navigation System is induced and GDOP diagram is completed in this paper. A scheme that can improve the position accuracy in the blind area of Hyperboic Navigation System using the Rectangular Navigation System is proposed through the computer simulation.

• Journal of Navigation and Port Research
• /
• v.28 no.8
• /
• pp.653-657
• /
• 2004

The authors aim to design further an upgraded and self-contained position fixing system to meet the future commercial requirements. As a first step this paper is to investigate the theoretical structure of position fixing based on the nature of free gyro, in which the tilt angles of the two spin axes at an arbitrary position are measured respectively and the elapsed time with respect to a reference position or starting point is observed And it illustrates some limitations to be expected in this system.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.53-62
• /
• 1998

Accuracy of positions by GPS receiver at Tongyoung Port were measured and analysed in order to get more credible information on GPS positioning for vessels. Positions were automatically recorded every 5-Min from 1st October, 1997 to 30th of November, 1997 by two identical GPS receivers at the Laboratory of Navigation in the College of Marine Science, Gyeongsang University ($34^{\circ}$ 49' 57.985"N, $128^{\circ}$ 24' 06.562") and at the training ship "Gyeongyang" alongside in the tongyoung passenger port ($34^{\circ}$ 50" 10.080"N, $128^{\circ}$ 25' 16.415") as fixed positions. The results are as follows ; 1. Number of the usable satellites observing Zenith angle between $9^{\circ}$ and $82^{\circ}$ was normally 4 during a day 24 hours except for 3 hours with total Number 20. 2. Accuracy of position with time was widely dispersed around center of standard position as well as directional deviation around mean position. 3. Specific error of GPS receiver showed a little deviation by alternative measurements for consecutive 5 days at each fixed position respectively. 4. Accuracy of GPS position at 2 fixed positions of Tongyoung port was revealed 27.2 m as minimum value while normal accuracy for all day could be less than 50 m.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1998.10b
• /
• pp.65-73
• /
• 1998

Ship's positino data obtaining method is ine of the very important factor innavigation . Nowadays, GPS(Global Positioning System) using the earth orbiting satellites are equipped and operated for the position finding. Because it provides more precise position information than other equipments and is very convenient for navigator. In this study, it is designed to develop the GPS simulator for everybody being able to proactise the GPS operating skill like as navigation planning, navigation calculating etc. And also, it can be operated with personal computer without real GPS receiver. This simulation system is based on the real GPS receiver system and built by the visual basic 5.0 program. And it displays the ship's position and navigating information and plots the ship's moving track on the screen in real time according as initial setup data-main engine's rpm, rudder angle, depature position and waypoint.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.117-120
• /
• 2004

This paper is to investigate theoretically position fixing by using gyroscopic inertia of free gyroscope. with respect to a reference position or starting point, the changes of the inclination angle of the spin axes and the elapsed time are taken a measurement. By using the two basic factors like changes of angles a position is fixed.