• Korean Chemical Engineering Research
• /
• 제51권3호
• /
• pp.382-387
• /
• 2013

압출 컴파운딩 공정 및 케스팅 필름 공정을 이용하여 생분해성 폴리우레탄(PU)/클레이 나노복합 필름을 제조하였다. PU 수지와의 강한 결합 형성을 위해 유기적으로 개질되어 그 표면에 많은 양의 히드록시기를 갖는 MMT 나노클레이(C30B)를 사용하였다. 압출 공정 중 발생된 높은 전단 응력에 의해 발현된 복합체 내 나노판상체의 삽입/박리 구조 및 분산 상태를 XRD 분석 및 TEM 관찰을 통해 확인하였다. 또한 제조된 나노복합체의 유변물성, 인장물성, 투명성, 산소투과도의 변화를 첨가된 나노클레이 함량에 따라 조사하였으며, 이로부터 나노복합체 내 나노판상체의 박리 및 분산 구조와 물성과의 상관 관계를 제시할 수 있었다. 일정수준의 함량으로 첨가된 나노클레이는 복합 필름의 인장 탄성율, 연신율, 투명성, 산소차단성 등의 성능 향상에 뚜렷하게 기여하였으나, 그 이상의 함량으로 첨가되면 불완전한 박리 및 불균질한 분산성으로 인하여 오히려 성능이 감소하거나 또는 그 증가 폭이 매우 작은 것으로 나타났다. PU/clay 나노복합 필름의 생분해성은 퇴비화 실험을 통한 분해시간에 따른 필름의 산소투과도 및 인장물성의 변화를 관찰함으로써 확인하였다.

• 접착 및 계면
• /
• 제22권1호
• /
• pp.16-21
• /
• 2021

항공기 산업에서 착빙 제거 및 방지는 안전상 매우 중요한 기술이다. 착빙 제거에 대한 연구는 활발히 진행되어 실제 항공기에 적용한 상태이지만, 착빙을 사전에 방지 및 지연하는 기술은 아직 미비한 실정이다. 본 연구에서는 다른 종류의 나노입자를 코팅함으로써 폴리우레탄 탑코트의 표면거칠기 및 표면에너지를 조절하였다. 각 나노입자 종류에 따른 코팅면에 증류수를 이용한 정적접촉각을 측정하여 소수성을 평가하였고, 나노입자 코팅면의 안정도를 평가하기 위해 인발접착시험을 진행하였다. 또한, 나노입자의 종류에 따른 탑코트의 색재현성 평가를 위해 표면의 RGB 색을 비교하여 정량화를 진행하였다. 이를 통해 탑코트의 원색을 최대한 재현하면서 접착성을 가질 수 있는 최적의 소수성 표면을 얻을 수 있었다.

• Macromolecular Research
• /
• 제11권3호
• /
• pp.198-201
• /
• 2003

Aqueous emulsion of polyurethane (PU) ionomers were reinforced with hydrophobic nanosilica to give composites. The aqueous emulsion was stable and the particle size increased as the content of hydrophobic nanosilica was increased. The reinforcing effect of nanosilica in mechanical properties of these composites were examined by dynamic mechanical and tensile tests, and the Shore A hardness was measured. Enhanced thermal and water resistance and marginal reduction in transparency of these composites were observed compared with pristine polymer. These results were similar with those of our previous studies on waterborne PU/organoclay nanocomposites.

• 한국잠사곤충학회지
• /
• 제40권2호
• /
• pp.143-149
• /
• 1998

For the application of silk sericin, silk sericin powders were prepared by various spray dry conditions and the characteristics of silk sericin/polyurethane mixed films were investigated. When the sericin was dried from the solution at higher inlet and outlet temperature, larger sizes of the powder particles were obtained. It was also found that inlet and outlet temperatures were important factors affecting the shape and surface characteristics of sericin power particle. The many holes and empty spaces were observed at the surface and cross section of sericin/PU mixed film. With the increase of the amount of sericin powder in the mixed films, the size and number of holes and empty spaces were increased. The thickness of sericin/PU mixed film was increased with the content of sericin powder. As the portion of sericin powder increase, the tenacity is decreased while the elongation slightly increased.

• 한국환경과학회지
• /
• 제23권11호
• /
• pp.1909-1918
• /
• 2014

In this experiment no solvent based polyurethane(PU) adhesives were prepared with the polyol, isocyanate, dioctyl phthalate(DOP), 2-hydroxyethylacrylate(2-HEA) and other acrylate monomers. The softenening point of the PU adhesives measured by Ring & Ball method were examined in the present study. And adhesion strength and mechanical properties such as tensile strength and 100% modulus of the PU adhesives were evaluated by Universal Test Machine. The experimental results showed that increase of both DPE-41, benzoylperoxide(BPO) and toluene diisocyanate(TDI) increased softenening point, adhesion strength, tensile strength and 100% modulus. However as DOP content increased sofenening point, adhesion strength decreased and tensile strength, 100% modulus also decreased.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.131-140
• /
• 2017

Uniform nanofibers of polyurethane with different content of Juniperus Chinensis extracts (JCE) were successfully prepared by the electrospinning method. We investigated physiochemical properties of prepared compound nanoweb according to various concentrations of Juniperus Chinensis extracts using a Fourier transform infrared (FT-IR) spectrometer, X-ray diffractometer (XRD), thermogravimeter (TGA), and differential scanning calorimeter (DSC). The antibacterial activity of the JCE loaded PU nanofiber was conducted using the disk diffusion test against Gram-positive and Gram-negative bacteria. JCE was induced in the infrared spectra in the absorption band of PU/JCE nanowebs at $3,300cm^{-1}$, $2,960cm^{-1}$, $1,400-1,600cm^{-1}$, and $1,050cm^{-1}$. Thermal stability decreased with increasing JCE content in the PU/JCE nanowebs. The DSC curve of the PU nanoweb shows an endotherm peak at $420^{\circ}C$; in addition, the peak also became smaller and broader with increasing JCE content. The diffraction intensities of PU observed at 2 theta of $20^{\circ}$ decreased with the increasing amount of JCE in the compound nanoweb. In addition, the crystal intensities of the compound nanowebs also decreased along with the JCE content. Structural analysis indicates that JCE and PU are miscible. Juniperus Chinensis incorporated PU nanofibers demonstrated excellent antibacterial properties against both Gram-positive and Gram-negative bacteria.

• 멤브레인
• /
• 제15권1호
• /
• pp.44-51
• /
• 2005

유기증기에 대한 PDMS의 단점을 보완하기 위해 4,4'-diphenylmethane diisocyanate (MDI)와 1,4-butanediol(BD)를 이용하여 poly(dimethylsiloxane)를 기초로 한 polyurethane-polysiloxanes (PU/PDMS)를 합성하였다. 그리고 poly(tetrafluoroethylene) (PTFE)를 다공성 지지체로 이용하여 복합막을 제조하여 SEM 분석으로 코팅층의 존재와 두께를 확인하였다. 증기투과실험에서 투과온도와 feed의 농도가 증가할수록 flux는 점차 증가하였고, separation factor는 이와 반대로 점차 감소하는 'trade-off'현상을 보였다. 본 연구에서의 PU/PDMS는 soft segment의 함량보다는 비교적 hard segment의 함량이 높기 때문에 투과온도의 증가에 따른 영향이 크지 않았던 것으로 사료된다. PU/PDMS막은 VOCs와 상대적으로 높은 친화도를 가지고 있기 때문에 PU/PDMS 균질막과 비교하여 복합막의 형태에서도 향상된 flux와 높은 separation factor를 나타내었다.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.129-129
• /
• 2006

Conventional solvent-based polyurethane (PU) is well established for wide applications, such as textile treatments, surface coating, adhesive and so on. Due to the demands of safety, economic, and environmental protection, the solvent-based PU is restricted and has been phasing out and aqueous-based PU is becoming the world market trend, which is an environmental friendly product. The chemical resistance, physical and mechanical properties of aqueous-based PU are still not competible with solvent-based PU. Because of aqueous-based PU is a linear thermoplastic polymer with lower average molecular weight. Their improvements are normally performed by a post-curing reaction or a polymer hybridization to enhance the polymer cross-linking density. Hybridization of PU with aqueous-based epoxy resin or acrylate emulsion and then cured by a curing agent for improving the performance properties and reducing the cost of aqueous-based PU.Furthermore, a special function is added to aqueous-based PU increasing the application value, for examples, flame retardation, polymeric dyes, hydrophilic and etc.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.113-119
• /
• 2013

PURPOSES : The objectives of this study are to develop the eco-friendly pavement material using polyurethane binder and evaluate mechanical properties of the developed binder and concrete. METHODS : The bending beam test was conducted to select the sample candidates of polyurethane binder based on the bending strength. The characteristics of viscosity, curing time, and temperature change of sample binder was examined on different temperature conditions. The mechanical properties of polyurethane binder was estimated using the dynamic modulus testing. The indirect tensile strength test was conducted on polyurethane binder concrete with different gradation and binder content for evaluating the mechanical properties of concretes. RESULTS : Based on the beading beam test, four different binder samples were prepared for estimate the mechanical properties. The viscosity of polyurethane binder tends to increase with increase of liquid temperature and the hardening phenomenon begins 10 to 15 minutes at room temperature after mixing the resin and hardener. It is observed that the dynamic modulus of binder increases as loading frequency increases and change of modulus is found to be the highest in the PU-2I binder type. The PU-2I binder concretes shows the largest value of indirect tensile strength and indirect tensile energy. CONCLUSIONS : The use of polyurethane binder as pavement materials is capable of increasing the pavement performance and reducing the detrimental environmental effect during the highway construction.

• 폴리머
• /
• 제34권2호
• /
• pp.104-107
• /
• 2010

가교제인 trimethylol propane(TMP)의 함량변화에 따라 다양한 폴리우레탄(PU) 평판을 제작하였다. DMA 측정을 통하여 TMP 함량에 따라서 PU의 $T_g$는 34.8 $^{\circ}C$에서 49.9 $^{\circ}C$로 증가를 확인하였다. TMP의 함량이 4%에서 12%까지 증가함에 따라 탄성률은 322 MPa에서 423 MPa로 증가하였고, 인장강도는 10.6 MPa에서 14.8 MPa로 다소 증가하였으며, 신율은 62.8%에서 49%로 감소하였다. 음향특성의 경우, TMP의 함량이 증가함에 따라 가교 정도가 높아지며, 음속은 증가하였으나 음향감쇠계수는 감소하였다. 제작한 PU 평판은 4주간 수중에서 안정적임을 보여 주었다.