• 폴리머
• /
• 제34권2호
• /
• pp.144-149
• /
• 2010

Ag/polystyrene(PS) 나노복합체를 110 $^{\circ}C$의 가열법에 의하여 silver 2-ethylhexylcarbamate(Ag-CB) 복합체의 환원과 동시에 라디칼 중합을 진행하여 제조하였다. 또한, 이러한 전통적인 가열법과는 대조적으로 마이크로파를 조사하여 스티렌 단량체의 중합이 진행됨이 없이 은 나노입자가 잘 분산된 콜로이드 스티렌 용액을 제조할 수 있었다. 이렇게 단지 마이크로파를 조사하여 은 나노입자를 제조하는 방법은 반응기 내의 전체 용액 속에서 균일하고 빠르게 진행되어 매우 입자가 작고 균일한 은 나노콜로이드 용액을 제조할 수 있었다. 또한, 연속적으로 얻어진 은 나노입자를 포함하는 단량체 용액을 라디칼 중합시킴으로써 PS 고분자 매트릭스에 은 나노입자가 잘 분산된 Ag/PS 나노복합체를 얻을 수 있었다. Ag/PS(0.1/100) 나노복합체는 Ag/PS(4.0/100)를 마스터배치로 사용하여 용융-혼합 방법에 의하여 성공적으로 제조할 수 있었으며 그러한 나노복합체를 UV-VIS spectroscopy, TEM, 그리고 XRD를 이용하여 확인하였다.

• Macromolecular Research
• /
• 제12권5호
• /
• pp.519-527
• /
• 2004

Stable poly(methyl methacrylate-co-divinylbenzene) (poly(MMA-co-DVB)) microspheres were prepared by precipitation polymerization using acetonitrile as the main medium under various polymerization conditions, including modifications of the agitation speed, monomer and initiator concentrations, DVB content in the monomer mixture, and the use of various cosolvents. Gentle agitation was required to obtain smooth spherical particles. The individually stable microspheres were obtained at monomer concentrations of up to 15 vol% in an acetonitrile medium. The number-average diameter increased linearly with respect to increases in the monomer and initiator concentrations. We found, however, that the uniformity of the microspheres was independent of the variation of the polymerization ingredients because nuclei formation was solely influenced by the crosslinking reaction of the monomers. We obtained higher yields for the polymerization at higher concentrations of monomer and initiator. The concentration of DVB in the monomer mixture composition played an important role in determining not only the size of the microspheres but also the yield of the polymerization. In addition, although we employed various cosolvents as the polymerization medium, we found that acetonitrile/2-methoxyethanol was the only system that provided spherical particles without coagulation. This finding indicates that the precipitation polymerization is strongly dependent on the solvent used as the medium.

• 폴리머
• /
• 제27권5호
• /
• pp.421-428
• /
• 2003

반응성 올리고머 및 메타아크릴레이트/SBS블렌드의 확산에 의해 제어되는 광중합 반응 특성을 ATR-FTR을 이용하여 고찰하였다. 광중합 속도는 반응 초기 단계에서는 자가 가속 현상을 보이며 반응 속도가 급격하게 증가하여 반응이 진행함에 따라 확산에 의한 반응 지연 현상이 관찰된다. 확산 제어항이 도입된 반응 기구 속도식으로 반응 속도를 해석한 결과 전체 반응 구간에서 실험 결과와 잘 일치하였다. SBS의 도입을 위해 사용된 반응성 용매인 N-비닐피롤리돈 (NVP)의 첨가에 의해서 최종 전환율에 이르는 시간은 거의 일정하였으나 전환율은 NVP의 높은 반응성으로 인하여 증가하는 경향을 보였다. 중합 반응 속도도 NVP 첨가에 의하여 증가하는 경향을 보였다. SBS의 첨가시 NVP-SBS의 함량이 10 phr까지는 동일한 전환율 거동을 보이나 NVP-SBS의 함량이 20 phr에서는 현저히 떨어지게 되는데 이는 NVP-SBS의 함량이 20 phr에서는 블렌드의 점도가 증가하여 반응에 영향을 주는 것으로 보인다. NVP-SBS의 함량이 증가함에 따라 중합 반응 속도는 점진적으로 감소함을 알 수 있었다. 메타아크릴레이트./SBS의 블렌드는 상온과 여러 높은 온도 범위에서 상분리가 관찰되지 않았으며 광중합 반응 후에도 투명한 준-IPN을 형성하여 성공적으로 필름 및 코팅에 적용할 수 있었다.

• 대한수의학회지
• /
• 제35권3호
• /
• pp.531-536
• /
• 1995

Salmonella species are the most prevalent etiologic agents of food-borne acute gastroenteritis. Direct isolation of bacteria from the contaminated food, stool and animal tissues has been used for the diagnosis of salmonellosis routinely. However, isolation of bacteria is time consuming work and not so highly sensitive. In recent years, improved methods of polymerization chain reaction(PCR) and probe hybridization technique have led to the developement of diagnostic assays which employ to detect various human and animal pathogenic bacteria. In this study, we have performed the polymerization chain reaction to detect Salmonella pullorum from tissues and stool samples of chickens with two specific primers, ST5 and ST8C. The target DNA fragment of PhoE gene was successfully amplified from liver, spleen, pancreas, heart, lung, ovary, oviduct and feces samples. The amplified DNA fragments were hybridized with Salmonella typhymurium TA3000 PhoE probe by Southern hybridization. The PCR to amplify the PhoE gene was highly rapid and sensitive method to detect Salmonella pullorum from tissues and stool samples.

• Macromolecular Research
• /
• 제11권6호
• /
• pp.495-500
• /
• 2003

UV-induced graft polymerization of glycidyl methacrylate (GMA) to a polypropylene (PP) membrane was carried out in the vapor phase with benzophenone (BP) as a photoinitiator. Attenuated total reflection Fourier transform infrared spectroscopy, atomic force microscopy (AFM), and scanning electron microscopy (SEM) were utilized to characterize the copolymer. The degree of grafting increased with increasing reaction time, increased UV irradiation source intensity, and increased immersion concentration of the BP solution. The optimum synthetic condition for the PP-g-GMA membrane was obtained with a reaction time of 2 hrs, a UV irradiation source intensity of 450 W, and an immersion concentration of the BP solution of 0.5 mol/L. The pure water flux decreased upon increasing the degree of grafting and increasing the amount of diethylamino functional group introduced. The analysis of AFM and SEM images shows that the graft chains and diethylamino groups of PP-g-GMA grew on the PP membrane surface, resulting in a change in surface morphology.

• Fibers and Polymers
• /
• 제1권1호
• /
• pp.1-5
• /
• 2000

Poly(3-methyltetrahydrofuran)(3-MTHF) and poly(tetrahydrofuran-co-3-MTHF), having very narrow molecular weight distribution were successfully synthesized via photo-induced living cationic polymerization in the presence of diphenyliodonium hexafluorophosphate. Linear relationship between % conversion and number average molecular weight of resulting poly(3-MTHF) in the polymerization of 3-MTHF, carried out at -22$^{\circ}C$, indicates that the 5-membered cyclic oxonium ion, being responsible for the cationic propagation is stabilized by ion pall formation with hexafluorophosphate anion, supplied from the salt. The linear relationship between two parameters, mentioned above was also observed in the copolymerization of 3-MTHF with THF, carried out at 0 and -22$^{\circ}C$. The molecular structures including the copolymer composition and average molecular weight and its distribution is determined by reaction parameters such as monomer feed ratio and reaction temperature.

• 대한전기학회논문지
• /
• 제36권1호
• /
• pp.29-35
• /
• 1987

TPolystyrene thin films are prepared by glow discharge of sytrene monomer vapor th establish the growth mechanism of organic thin films by the plasma polymerization. As the discharge parameters, discharge current(5mA-20mA), frequency (10kHz-50kHz, 13.56MHz), gaspressure (0.2torr-1.5torr), and discharge time(2min-12min)are adopted. Plasma-polymerized filmsof styrene vapor are identified as polystyrene by IR spectra. The thickness of plasma-polymerized films increases with gas pressure, frequency and discharge current in the region of the low frequency and below the allowed gas pressure where the polymerization occurs. It is suggested that the growth mechanism can be explained by ionic reaction in d.c. and low frequency region, and by radical reaction in high frequency region.

• Elastomers and Composites
• /
• 제28권4호
• /
• pp.267-273
• /
• 1993

A number of hydrophilic acrylic comonomers were incorporated into styrene-butadiene soap-free emulsion polymerization. It was found that reaction rate decreased according to : AN>AA>MMA>EA>IA>AAM>MA>HEMA. It was also observed that reaction rate increased with decreasing H-bonding factor contribution to the solubility parameter of the hydrophilic comonoer. The SBR latexes were very monodisperse with the particle size distribution of $1.03{\times}1.12$. Since growth rate is proportional to polymerization time, the difference in conversion rates between various comonomers was resulted from the particle number density of SBR latexes for the various hydrophilic comonomers. It was also found that the colloidal stability of the latexes was excellent because no external emulsifier was incorporated.

• 한국인쇄학회지
• /
• 제11권1호
• /
• pp.17-29
• /
• 1993

As inverstigating the influence of monomers and photoinitiator in the polymerization rate of photopolymerization by using IR spectroscopy, photopolymerizations initiated by ultraviolet radiation are characterized by the presence of an autoacceleration in the polymerization rate as the reaction proceeds. The conversion for the end of the autoacceleration varies considerably depending on the monomer and reaction condition which determines coil size and viscosity. In UV curable systems, the autoacceleration begins at only a few percent conversion and continues to 40% in HEA solution and 60% conversion in EHA solution. The polymerization ate in HEA solution increased as follow; DMHA > HCPK > DMPA and could be explained by the interaction between the initiating radical and HEA monomer and the size of the photodissociated radical of initiator. But the tendency of autoacceleration in EHA solution is almost independent on initiator.

• Bulletin of the Korean Chemical Society
• /
• 제20권10호
• /
• pp.1195-1199
• /
• 1999

2-(2,4,5-Trimethoxyphenyl)-4-methylene-1,3-dioxolane (1b), 2-(2,4,6-trimethoxyphenyl)-4-methylene-1,3-di-oxolane (2b), and 2-(3,4,5-trimethoxyphenyl)-4-methylene-1,3-dioxolane (3b) were prepared and polymerized with boron trifluoride. Boron trifluoride catalyzed reaction proceeded via mainly ring-opening polymerization and cyclization reaction to yield poly(keto ether) and 3(2H)-dihydrofuranone. The yields of polymer and cyclized product exhibited a dependency on the position of the methoxy substituents in the benzene ring of 2-phenyl-4-methylene-1,3-dioxolane derivatives. Electrophilic attack of methylene or oxygen atom on 4-meth-ylene-1,3-dioxolane ring were suggested for the polymerization and cyclization.